Test
Spectrum Protect Plus Implementation
Este test tiene tiempo límite, así que se abre en el reproductor de siempre.
Preguntas del test (68)
1What will cause a report name to be invalid when creating a custom report?
- Aif there is an underscore in the name
- Bif there is a dollar sign $ in the name
- Cif there are less than 8 characters in the name
- Dif there is a space in the name
2Where is guidance on the appropriate disk technologies and RAID protection levels for the IBM
Spectrum Protect Plus vSnap server?- Athe IBM Spectrum Spectrum Protect Plus – All Requirements Doc
- Bthe Disk Magic and Capacity Magic tools
- Cthe IBM Spectrum Protect Plus Blueprint
- Dthe IBM Spectrum Protect Plus Performance Tuning Guide
3What will cause a file restore to a Windows VM to fail?
- AThe IBM Spectrum Protect Plus Service is not set to Act as part of the operating system in the guest.
- BiSCSI service is not started in the guest.
- CA user is logged into the desktop of the guest and the file is being restored to that desktop
- DThe IBM Spectrum Protect Plus File Restore Enabler is not installed in the guest.
4Which two options describe how the retention of backup data may be defined in an IBM Spectrum
Protect Plus SLA policy? (Choose two.)- Athe number of active versions of each backup to be kept
- Bthe number of days the last backup is retained in offloaded IBM Spectrum Protect storage
- Cthe number of backups to be kept
- Dthe number of days the last backup
- Ethe number of days backups are to be kept
5How can the network interface information be reviewed?
- Aexpand the Backup Storage Server Details in the System view
- Bping the vSnap Storage Server and verify the IP address and name resolution
- Cclick the Manage Backup Storage icon of a Backup Storage and review the network interface
- Drun the vsnap networkshow command to list network interfaces and the services that are associated
with each interface
6After adding a new virtual machine to IBM Spectrum Protect Plus, what must be done to see it in the backup page?
- AClick the Auto Refresh button in the Hypervisor Backup page.
- BRun a backup of the SLA policy group it is associated with to pick up the new system.
- CRun the hypervisor inventory job.
- DGo to the Systems SITE page and edit the site information
7What is the login procedure to follow after the IBM Spectrum Protect Plus software is installed on VMware and the virtual machine is started?
- Alog in with a web browser using the IP address of the IBM Spectrum Protect Plus virtual machine
- Blog in through the vSphere console
- Clog in to the CentOS console and run the start command
- Dstart the IBM Spectrum Protect Plus console application
8Which statement is true regarding trial versions?
- AThe trial version of IBM Spectrum Protect Plus is good for 90 days before upgrading to the paid version is required.
- BIBM Spectrum Protect Plus trial version includes a license key for IBM Spectrum Protect Extended Edition.
- CA license key can be downloaded through Passport Advantage to upgrade from the trial version to the full paid version.
- DThe trial version must be uninstalled before upgrading to the full paid version so that it can be properly licensed.
9What is the default mode of a virtual machine restore job?
- AProduction Mode
- BClone Mode
- CHypervisor Mode
- DTest Mode
10A company has two datacenters in two locations. Location 1 contains a vSphere vCenter and datacenter with 10 TB of deployed capacity and a Microsoft SQL deployment of 50 TB. Location 2 has an Oracle database deployment of 200 TB.
The business has provided the following data protection requirements:
- All virtual machine and database data has to be protected once a day with a 30-day retention.
- Virtual machines require an additional weekly backup with a 180-day retention.- AOnly one single site will be created in the IBM Spectrum Protect Plus server so that the data can be merged appropriately.
- BThe default Silver SLA can only be used at the first site.
- CA custom SLA needs to be created for the Primary Site for the weekly backup with 180-day retention.
- DThe default Silver SLA must be used in first site only to meet the requirement for daily backup with 30-day retention.
11Which predefined user role provides access to all resources and privileges and can be assigned to newly created user accounts and groups?
- ASYSADMIN
- BBackup Only
- CSUPERUSER
- DVM Admin
12What is a requirement for installation of an IBM Spectrum Protect Plus vStorage API for Data Protection (VADP) proxy?
- AThe VADP proxy must be installed on a separate hypervisor host from the IBM Spectrum Protect Plus server.
- BA supported Linux host must be installed and available.
- CA supported Windows host must be installed and available.
- DThe VADP proxy must be installed on a separate datastore from the IBM Spectrum Protect Plus
13An IBM Spectrum Protect Plus vSnap server can be deployed on which physical server platform?
- AWindows Server 2016
- BDebian Linux
- CIBM AIX
- DRed Hat Enterprise Linux
14The VM Backup History reports that a VM backup has failed. The report indicates the VM is in the Silver SLA.
Which job contains the detailed log of the backup?- Ahyperv_Silver
- BSilver_log
- CFailed_Silver_hyperv
- DSilver_Failed_VMs
15What should be checked before updating the VADP Proxy Server?
- Aensure the VADP Proxy and the vSnap server are in the same Site
- Bensure that the IBM Spectrum Protect Plus CPU utilization is below 50%
- Censure that no active jobs are using the Proxy Server
- Densure that all IBM Spectrum Protect Plus restore jobs have
16What is the basic method for updating the VADP Proxy Server?
- Alog in to the VADP console and run the appropriate .run file
- Bpush the update from the IBM Spectrum Protect Plus interface
- Crun the VADP installer on the appropriate server
- Drun the update through the vSphere console
17Which statement is true when defining the VADP Proxy in the Backup Options?
- ASelecting the By Site option allows selection of a specific proxy server.
- BSelecting the By Site option can provide load balancing across multiple proxy servers.
- CSelecting the By Proxy option can provide load balancing across multiple proxy servers.
- DSelecting Default as the By Site option will ensure that the Proxy Server is in a different site than the vSnap server.
18Which report shows virtual machines that have not been replicated within their scheduled replication time frame?
- AVM Backup History report
- BVM SLA Policy Compliance report
- CVM Snapshot report
- DProtected VMs report
19Which interface allows IBM Spectrum Protect Plus to integrate with an external scheduler, for example, to start a VM backup job?
- AIBM Spectrum Protect Plus administrative command line client
- BIBM Spectrum Protect Plus REST API
- CIBM Spectrum Protect Operations Center
- DIBM Spectrum Protect Plus Admin GUI
20Which minimum resource type must be assigned to a user in order to run IBM Spectrum Protect Plus predefined reports?
- ASystem
- BReport
- CMonitoring
- DScreen
21What describes a purpose of an IBM Spectrum Protect Plus Resource Group?
- Adefine the retention of backup data
- Bdefine the offload relationships to IBM Spectrum Protect Servers
- Cdefine the actions a user can perform
- Ddefine the VMs that will be made available to a user
22How should the nmtui utility be accessed when configuring IBM Spectrum Protect Plus?
- Ausing the Administrative Console with su privileges
- Busing the IBM Spectrum Protect Plus REST API
- Cby logging on to the appliance as root
- Dusing the Administrative Console with configure privileges
23What are two valid IBM Spectrum Protect Plus actions to take following a successful Test Mode VMware virtual machine restore? (Choose two.)
- ACleanup. Destroy the virtual machine and clean up all associated resources.
- BBackup. Back up the newly-restored copy of the virtual machine
- CReplicate. Create another working copy of the virtual machine on a storage partner.
- DClone. Migrate the virtual machine through vMotion to the Datastore and Virtual Network defined as the Test network.
- EManage. Work with the settings of the restored virtual machine.
24Which two actions will expand the capacity of a vSnap storage server? (Choose two.)
- Aconnect to the storage system and extend the size of the existing disks that are in use by the vSnap server
- Bassign a new disk to the vSnap server and use the IBM Spectrum Protect Plus GUI to rescan and add the new disk to the vSnap Storage
- Cassign a new disk to the vSnap server and use vSnap disk rescan and vSnap pool expand commands
- Ddeploy a new vSnap server and mount the capacity to the existing vSnap server
- Eassign a new disk to the vSnap server and use LVM commands to expand the corresponding volume group and logical volume
25Where is the replication schedule for a vSnap repository controlled?
- Ainside an SLA
- BvSnap Storage Definition
- Creplication settings of the VADP Proxy
- Dthe Hypervisor Definition
26How can disks associated with the Backup Storage be displayed?
- Aclick in the Backup Storage view the Actions menu and select then Show Disks
- Bexpand the Backup Storage in the Dashboard view and verify the disk utilization
- Cclick the Manage Backup Storage icon of a Backup Storage and review the shown disk volumes
- Drun the vsnap disk show command
27Which input is required during a VMware vCenter registration in IBM Spectrum Protect Plus when linking it to an IBM Spectrum Protect server?
- ATCP port number of the IBM Spectrum Protect server
- BFQDN or IP address of the IBM Spectrum Protect server
- CFQDN or IP address of a vStorage Backup server
- DIBM Spectrum Protect server admin name
28How is backup frequency controlled in IBM Spectrum Protect Plus?
- Ausing the job scheduler
- Bsetting the backup options
- Ccreating and applying an SLA policy
- Dstarting a job on the Job Monitor screen
29What is required to allow single files to be restored from VM backups with IBM Spectrum Protect Plus?
- Aselect Catalog File Metadata in the backup options for a VM to enable file indexing and perform a backup
- Bperform a VM backup using default options
- Cenable the file restore in the IBM Spectrum Protect Plus Hypervisors option menu
- Dcreate a vSnap backup storage which is enabled for single file indexing
30What is true of the user defined in the configuration to catalog Windows files for restore?
- Ait must have the Act as part of the operating system privilege
- Bit must be a local user
- Cit must have Local Administrator privilege on the VM
- Dit must have the WinRM privilege
31What is required when installing IBM Spectrum Protect Plus on VMware?
- AVMware vCloud Director
- Ba 32-bit dual core machine
- CvSphere 5.5, 6.0 or 6.5
- Da static IP address
32Which kind of Bind Distinguished Name is supported by IBM Spectrum Protect Plus?
- ADefault bind
- BSimple bind
- CStandard bind
- DComplex bind
33Which two statuses are provided when running a Protection Report? (Choose two.)
- Athe protection status of databases
- Bthe protection status of network
- Cthe protection status of vSnap
- Dthe protection status of VADP proxy
- Ethe protection status of virtual machines
34What is the file format of the IBM Spectrum Protect Plus appliance update files?
- A.run
- B.iso
- C.bin
- D.dat
35A customer has two main data center and three remote sites. The main sites have three VMware ESX servers each and the remote sites always use on ESX server.
How many IBM Spectrum Protect Plus servers are required to back up the environment?- Aeach VMware ESX server requires its own IBM Spectrum Protect Plus server with replication enabled
- Beach site requires a IBM Spectrum Protect Plus server
- Ca single IBM Spectrum Protect Plus server is required for an enterprise
- Dthree IBM Spectrum Protect Plus server are required
36Which information is found in the Configuration report?
- Athe network settings of the IBM Spectrum Protect Plus virtual machine
- Bthe names of the VADP proxy servers
- Cthe number of hypervisors in the IBM Spectrum Protect Plus environment
- Dthe total amount of storage being used
37Where is up-to-date information about IBM Spectrum Protect Plus hardware and software prerequisites?
- Athe IBM Spectrum Protect Plus Installation and User’s Guide
- Bthe IBM Spectrum Protect Plus vSnap Sizer tool
- Cthe IBM Spectrum Protect Plus Blueprint
- Dthe IBM Spectrum Protect Plus – All Requirements Doc
38What is the default role of ADMIN user in IBM Spectrum Protect Plus?
- ASA
- BRESOURCE
- CSUPERUSER
- DSYSADMIN
39What is the first action after installing a separate vSnap server?
- Aconfigure replication for the vSnap server
- Bcomplete an advanced initialization
- Cregister the vSnap server as a backup storage target
- Dadd additional storage LUNs
40How many vSnap servers are automatically deployed with IBM Spectrum Protect Plus on IBM Cloud?
- A2 – The embedded vSnap Server and a separated vSnap server for replication
- B3 – Three physical vSnap Server for performance reasons
- C0 – The number of required vSnap servers must be configured manually
- D1 – The embedded vSnap Server within the IBM Spectrum Protect Plus VM
41How can a Recovery Point Objective of 8 hours be achieved with IBM Spectrum Protect Plus?
- Ano additional configuration is required, IBM Spectrum Protect Plus will continuously perform backups of the configured hypervisors
- Bconfigure an SLA policy with a retention of 8 hours
- Cconfigure an SLA policy for high important VMs which start at 10pm and ensure by checking the backup logs backup is completed until 6 am
- Dconfigure an SLA policy with a Frequency of 8 hours and assign the high important VMs to this policy
42Which types of report categories are listed in the Reports section?
- AStorage pools, Hypervisors, Protection, Daily Activity
- BBackup, Restore, Archive, Retrieve
- CBackup Storage Utilization, Protection, System, VM Environment
- DActivity, System Events, vSnap storage, Recovery
43A Microsoft Hyper-V VM in the Bronze policy is deleted using Hyper-V Manager and the backup job for the Bronze SLA is run before the Default Hypervisor Inventory is scheduled.
What is the result?- AThe hyperv_Bronze job completes with a state of FAILED
- BThe hyperv_Bronze job completes with a state of PARTIAL
- CThe hyperv_Bronze job skips the deleted VM
- DThe hyperv_Bronze job automatically runs the Default Hypervisor Inventory job
44What describes the purpose of an IBM Spectrum Protect Plus User Role?
- Adefine the resources that will be made available to a user
- Bdefine the actions that can be performed for the resources defined in a resource group
- Cset password restrictions on a set of users
- Dprovide a means to group similar users together
45What is the initial user name when first logging on to IBM Spectrum Protect Plus?
- Aroot
- Bsystem
- Cadmin
- Dadministrator
46Before applying a patch to update the vSnap server, which action should be taken regarding the jobs that use the vSnap server?
- AFind all the jobs that use the vSnap server in the Job monitor and select Action > Reschedule.
- BOpen the Job monitor, and when each job is in a complete or idle state, Select Action > Hold Schedule.
- CFind all the jobs that use the vSnap server in the Job monitor and from the Action menu, select Pause.
- DOpen the Job monitor and from the Action menu, select cancel process for all jobs that are active.
47As per Microsoft Hyper-V requirements, what is the minimum amount of memory?
- A12 GB
- B16 GB
- C4 GB
- D8 GB
48For troubleshooting reasons, IBM Technical Support might ask for an IBM Spectrum Protect Plus log collection.
How is this collected?- Aby taking a screenshot of the Job Monitoring panel in the IBM Spectrum Protect Plus dashboard
- Bvia the Download System Logs panel in the IBM Spectrum Protect Plus dashboard
- Cby copying the /var/log/messages file via FTP from the IBM Spectrum Protect Plus virtual appliance
- Dthe error log viewer in the IBM Spectrum Protect Plus administrative console
49Which three procedures would help diagnose a Domain Name Service (DNS) configuration issue on the IBM Spectrum Protect Plus appliance? (Choose three.)
- ACheck the firewall configuration to be sure the DNS port is not being blocked.
- BUse the DNS configuration wizard from the IBM Spectrum Protect Plus Administrative Console.
- CUse the Test button on the Hypervisor Backup panel.
- DUse the netstat command to be sure the appliance is listening on the IP address used by DNS
- EClick the user icon in the upper right corner of the User Interface and select Download System Logs.
- FRun a ping command using a host name from a command prompt
50What is true regarding Sites in IBM Spectrum Protect Plus?
- AA Site can only be a backup target or a replication target
- BSites must use the same storage equipment in order to replicate to each other
- CA Site can be both a backup target and a replication target.
- DA Site must include a VADP Proxy Server
51Which value is required in the Global Options in the vSnap sizing tool?
- Ainclude/exclude options
- Bback and capacity (in TiB)
- Cnumber of nodes
- Ddeduplication estimate (ratio)
52Which software products must be installed to configure backup offloading from IBM Spectrum Protect Plus to IBM Spectrum Protect?
- AIBM Spectrum Protect Plus, IBM Spectrum Protect and IBM Spectrum Protect Backup/Archive Client
- BIBM Spectrum Protect Plus, IBM Spectrum Protect Backup/Archive Client and IBM Spectrum Protect for Data Retention
- CIBM Spectrum Protect Plus, IBM Spectrum Protect and IBM Spectrum Protect for Virtual Environments
- DIBM Spectrum Protect Plus, IBM Spectrum Protect and IBM Spectrum Protect for SAN
53How is retention managed when IBM Spectrum Protect Plus is used to store data in a Spectrum Protect Cloud Container?
- AThe SLA on IBM Spectrum Protect Plus is used.
- BThe retention setting on the AWS cloud bucket is used.
- CThe IBM Spectrum Protect server management class is used.
- DThe retention setting on the IBM Cloud Object Storage vault is used.
54If a firewall is active on the VADP proxy, which ports on the vSnap server must be reachable (both TCP and UDP)?
- A111, 2049, and 20048
- B120, 2049 and 22
- C11000-11005
- D111, 2049 and 248
55Which statement is true regarding Oracle backups in IBM Spectrum Protect Plus?
- ARMAN is not needed on the Oracle server
- BIBM Spectrum Protect Plus will always do a full backup of the database
- CAll archived logs associated with the database are backed up.
- DThe database is not placed in hot backup mode
56What is true about the retention of replicated backup data as specified in an IBM Spectrum Protect Plus SLA Policy?
- AThe replicated data retention will, by default, match that of the source
- BThe replicated data retention may only be specified in terms of the number of snapshots, if different from the source.
- CThe replicated data retention may only be specified in terms of the number days, if different from the source.
- DIf specified, the replicated data retention must use the same unit of measure – either number of days or number of snapshots – as the source
57What is the purpose of the service, OpenSSH 5.3 (protocol 2.0), which runs on port 22?
- Aconnect to the remote shell of IBM Spectrum Protect Plus
- Bmanage certificates and licenses in IBM Spectrum Protect Plus
- Cperform backup and restore of the catalog in IBM Spectrum Protect Plus
- Ddiscover VADP proxies in IBM Spectrum Protect Plus
58What is the minimum amount of memory required for a vSnap server with 1 TB capacity?
- A32 GB
- B24 GB
- C64 GB
- D16 GB
59What is mandatory before installing the IBM Spectrum Protect Plus product as a Microsoft Hyper-V virtual appliance?
- AThe Microsoft iSCSI Initiator Service must be stopped
- BReview the IBM Spectrum Protect Plus system requirements
- CReview the additional VMware system requirements.
- DAssign a dynamic IP address with the NetworkManager Text User Interface (nmtui)
60How can a license key for IBM Spectrum Protect Plus be loaded?
- ASave the product key to a computer with Internet access and load it in the Administrative Console
- BWhen clicking Upload new license, it goes out to the Internet and obtains a license key, then click I accept license agreement
- CEnter the admin password in the License management page and IBM Spectrum Protect Plus automatically generates a key to load.
- DPull the license key from a secure website and it is automatically loaded into IBM Spectrum Protect Plus.
61Which action is used to put an SLA on hold indefinitely?
- AHold Schedule from the Job Monitor Screen
- BSuspend from the Job Monitor Screen
- CPause from the Job Monitor Screen
- DHold SLA from the SLA screen
62What are the necessary steps in order to stop the standalone VADP proxy?
- Astop the VADP proxy with the VADP proxy menu in IBM Spectrum Protect Plus
- Blog in to the Administrative Console, locate the VM hosting the VADP proxy and start it
- Clog in to the Administrative Console, locate the VM hosting the VADP proxy, right-click and then stop
- Dlog in to the Hypervisor and stop the virtual machine where the VM hosting the VADP proxy is located
63Which privileges are required for a user to perform an update when logging in using authentication type IBM Spectrum Protect Plus?
- AAPPLICATION ADMIN
- BVM ADMIN
- CSYSADMIN
- DSYSTEM
64What are two reasons no files are displayed in the search results when preparing to perform a file level restore? (Choose two.)
- AThe VADP proxy server from which the restore is to occur is not online
- BThe file or folder name mask specified does not match the case of the actual files/folders on the virtual machine.
- CThe folder name specified in the search criteria contains one or more backslash characters
- DThe user is not assigned the Restore only role
- ENo previous backup of the virtual machine has completed with the Catalog file metadata option specified.
65What needs to be done in order to enable IBM Spectrum Protect Plus to execute a script inside a VM as part of a backup job?
- AThe script file needs to be transferred to the IBM Spectrum Protect Plus server using the File Transfer Protocol (FTP).
- BThe script file needs to be transferred to the vSnap server that holds the backup data for the VM.
- CThe script needs to be uploaded to the IBM Spectrum Protect Plus server GUI using a Web Browser
- DThe script code needs to be pasted into the script creation wizard
66What are the steps to configure a catalog backup?
- Afrom IBM Spectrum Protect Plus WebUI click System --> Catalog ---> Backup
- Bfrom IBM Spectrum Protect Plus WebUI click System --> Job Monitor ---> Catalog
- Cfrom IBM Spectrum Protect Plus WebUI click SLA Policy --> Catalog ---> Backup
- Dfrom IBM Spectrum Protect Plus WebUI click System --> Catalog ---> Schedule
67Which three sections are included in the information when running the Test function on a Windows virtual machine from within IBM Spectrum Protect Plus Options menu? (Choose three.)
- AStorage – Basic test of vSnap configuration
- BVirtual – Basic Hypervisor test for Hypervisor Tools and DNS configuration
- COS – Basic test to confirm Windows license registration
- DLicensing – Test to confirm IBM Spectrum Protect Plus license is Valid
- ERemote – Remote Executor Test for create session and deploy Remote Agent
- FWindows – Basic Windows prerequisites for file and volume operations
68How can access roles be granted to an LDAP user account?
- Aassign the required roles to an LDAP Group which the LDAP user is a member of
- Bassign the required roles to the LDAP user
- Cafter the LDAP server is configured in IBM Spectrum Protect Plus, each LDAP user get all roles assigned automatically
- Dcreate a local user account which has the same name as the LDAP user and assign the required roles to the local user account
Información
- Descripción
- practica
- Autor
- Selene Hernández
- Idioma
- Español
- Visitas
- 2
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test