2982351
Descripción
Test por Paul Allen, actualizado hace más de 1 año
|
Creado por Paul Allen
hace casi 9 años
|
|
Pregunta 1
Pregunta
If new tyres had been fitted to a vehicle, what would indicate that they hadn’t been dynamically balanced?
Respuesta
-
Steering vibration at 40 – 50 mph
-
Steering wheel not straight
-
Poor engine performance
-
Brakes working hard
Pregunta 2
Pregunta
Tyre soap is used to?
Respuesta
-
Help the bead slip over the rim
-
Extend the working life of the tyre
-
Lock the tyre onto the wheel rim
-
Clean the tyre bead
Pregunta 3
Pregunta
The part of the machine arrowed is used to?
Respuesta
-
Remove the wheel weights
-
Break the tyre bead
-
Clamp the wheel rim
-
Inflate the tyre
Pregunta 4
Pregunta
The markings TWI found on a tyre side wall refers to?
Respuesta
-
Tyre wear indicator
-
Tread wear indicator
-
Tyre wheel information
-
Tyre weight information
Pregunta 5
Pregunta
What type of tyre construction is this?
Respuesta
-
Crossply
-
Tubed
-
Bias belted
-
Radial
Pregunta 6
Pregunta
The part of the rim arrowed is designed for what purpose?
Respuesta
-
To allow removal of the tyre
-
To keep the tyre on the rim
-
To provide a good seal
-
To help with inflation of the tyre
Pregunta 7
Pregunta
A tyre marked185/60 R14 84H. In relation to the diagram what number would represent 60?
Respuesta
-
1
-
2
-
3
-
4
Pregunta 8
Pregunta
The correct way to dispose of waste tyres should be to?
Respuesta
-
Return to manufacturer
-
Burn
-
Bury in the ground
-
Store correctly until a licensed waste carrier can remove them
Pregunta 9
Pregunta
From the diagram, what would the arrowed sections represent?
Respuesta
-
10,000 miles of wear left
-
3mm of tread
-
1.6mm of tread, legally requires replacing
-
1mm of tread illegal
Pregunta 10
Pregunta
The part of the machine arrowed is used to?
Respuesta
-
Remove the wheel weights
-
Break the tyre bead
-
Clamp the wheel rim
-
Inflate the tyre
Pregunta 11
Pregunta
When are you most likely to use this type of tyre?
Respuesta
-
Motorway driving
-
Off roading
-
Rain
-
General road use
Pregunta 12
Pregunta
What type of tyre construction is this?
Respuesta
-
Radial
-
Tubed
-
Bias belted
-
Crossply
Pregunta 13
Pregunta
A visual inspection would likely show?
Respuesta
-
Wear on a tyre tread
-
Thickness of a spacer
-
Brake disc runout
-
Clearance between camshaft lobe and follower
Pregunta 14
Pregunta
When road testing a vehicle after fitting new tyres, the technician should check the vehicle for?
Respuesta
-
Smooth driving conditions
-
Vehicle bouncing too much
-
Steering operation
-
Engine misfire
Pregunta 15
Pregunta
A torque wrench is used to tighten wheel nuts because?
Respuesta
-
They come loose
-
Double vibration will be heard
-
Brakes will not work
-
Steering will wander
Pregunta 16
Pregunta
Wheels that are fitted to only go in one direction should not be?
Respuesta
-
Switched front to back
-
Switched side to side
-
Should not be fitted
-
Can only be fitted by a specialist
Pregunta 17
Pregunta
When removing a wheel from a vehicle you must?
Respuesta
-
Remove air from the tyre
-
Torque the wheel nuts
-
Support the weight of the vehicle
-
Loosen the brakes
Pregunta 18
Pregunta
What does the R in 185/65 R 14 stand for?
Respuesta
-
Range
-
Road
-
Radius
-
Radial
Pregunta 19
Respuesta
-
Remove dirt from the tread
-
Remove the whole valve assembly
-
Check the tread depth
-
Remove the valve core
Pregunta 20
Pregunta
Oval bolt holes in a wheel indicate?
Respuesta
-
Special nuts are used
-
The wheel has been over tightened
-
The wheel has been run loose
-
It is a space saver wheel
¿Quieres crear tus propios Tests gratis con GoConqr? Más información.