Test
PEGA CSSA 8.6 part 1
Este test tiene tipos de pregunta que se abren en el reproductor de siempre.
Preguntas del test (45)
1Pega UI Kit is the most advanced, feature-rich, low-code option for creating a new application in Pega Platform.
- AVerdadero
- BFalso
2What is the purpose of the Enterprise Class Structure (ECS)?
- AECS is used to alter the performance of the Pega Platform.
- BECS references single-value properties and complex properties.
- CECS provides a structure supporting rule reuse.
- DECS documents industry or enterprise standards that applications must contain.
3You have a requirement to create an email correspondence that can be reused by other applications. In which two layers of the Enterprise Class Structure could you apply the email correspondence rule? (Choose Two)
- ADivision
- BPega Platform
- COrganization
- DImplementation
4Which layer of the Enterprise Class Structure (ECS) contains generalized assets that are then extended by specific implementations?
- ADivision
- BImplementation
- CFramework
- DOrganization
5When preparing for application versioning, it is a best practice to leave all of the RuleSets unlocked.
- AVerdadero
- BFalso
6Based on the information given for each patch, when a user runs the application, which rules are used for each patch? Drag the rules to the correct patch. (Choose Three rules per patch)
- ARule B: 01-01-01 (First Patch)
- BRule B: 01-01-03 (Second Patch)
- CRule B: 01-01-04 (Third Patch)
- DRule C: 01-01-01 (First Patch)
- ERule C: 01-01-03 (Second Patch)
- FRule C: 01-01-03 (Third Patch)
- GRule A: 01-01-02 (First Patch)
- HRule A: 01-01-02 (Second Patch)
- IRule A: 01-01-02 (Third Patch)
- JRule A: 01-01-01 (First Patch)
- KRule C: 01-01-02 (First Patch)
- LRule B: 01-01-02 (First Patch)
- MRule A: 01-01-01 (Second Patch)
- NRule B: 01-01-02 (Second Patch)
- ORule C: 01-01-02 (Second Patch)
- PRule A: 01-01-03 (Third Patch)
- QRule B: 01-01-03 (Third Patch)
- RRule C: 01-01-04 (Third Patch)
7A ruleset contains rules in 01-01-01, 01-01-02, and 01-01-03. Ruleset versions 01-01-02 and 01-01-03 contain primarily updates to existing rules in 01-01-01. The original rules for version 01-01-01 and all rule versions through 01-01-03 are saved in a new 01-02-01 version. This is an example of Skimming.
- AVerdadero
- BFalso
8The lock and roll versioning method ______________ and ____________________. (Choose Two)
- Aensures older versions of application rulesets are preserved unchanged.
- Bis used for small changes or patches.
- Cminimizes the rule data that is carried to a higher version of your application.
- Dfilters out rules that are unavailable for rule resolution.
9Why is application versioning important?
- AApplication versioning provides a means to organize applications by priority.
- BApplication versioning provides the ability to version data classes without impacting existing data classes.
- CApplication versioning provides the ability to clone rules.
- DApplication versioning preserves prior application versions.
10Which description is most accurate for skimming and lock and roll versioning options?
- ASkimming is the most efficient for major and minor updates. Lock and roll is most useful for patches.
- BPega provides a skimming wizard but not a lock and roll wizard.
- CSkimming saves checked out rules. Lock and roll does not save checked out rules.
- DSkimming carries blocked rules forward. Lock and roll does not carry blocked rules forward.
11The initial application created by the New Application wizard contains a set of rulesets for the application and organizational assets.
- AVerdadero
- BFalso
12You create the initial application rulesets using the New Application wizard. Which application ruleset is used for rules related to integration?
- AGogoRoadApp
- BMyTownAppInt
- CHRApps
- DMyTownApp
13When configuring application rulesets, what should you consider about ruleset validation? (Choose Two)
- ARuleset validation does not affect rule resolution at run time but is applied only at design time.
- BThe rulesets that contain the application rules are set to Application Validation (AV) mode.
- CThe organizational rulesets created by the New Application wizard are set to Application Validation (AV).
- DValidation mode applies only to major versions of the ruleset.
14Drag each validation mode on the right to the correct mode requirement on the left.
- ARuleset validation mode
- BApplication validation mode
- CRuleset validation mode
- DApplication validation mode
- ERuleset validation mode
- FApplication validation mode
- GRuleset validation mode
- HApplication validation mode
- IRuleset validation mode
- JApplication validation mode
- KRuleset validation mode
- LApplication validation mode
15Which two of the following statements about ruleset lists are correct? (Choose Two)
- AThe ruleset list indicates the rulesets that are available to the application for an operator session.
- BAll rulesets have the same precedence, regardless of their order in the ruleset list.
- CThe ruleset list indicates the rulesets that are available to the application for all operators.
- DRulesets at the top of the ruleset list take higher precedence.
16Select two record types that are involved when configuring a production ruleset. (Choose Two)
- AAccess group
- BWork group
- CApplication
- DOperator
17A claims framework contains two rulesets, ClaimsFW and ClaimsFWInt.
An application built on the framework also contains two rulesets, Claims and ClaimsInt.
Which statement is false if all the rulesets are configured as Application Validation?- ARules in ClaimsInt can reference rules in Claims
- BRules in Claims can reference rules in ClaimsFW
- CRules in ClaimsFW can reference rules in Claims
- DRules in ClaimsFWInt can reference rules in ClaimsFW
18A claims application contains two organizational and two application rulesets.
The organizational rulesets MyCo and MyCoInt are configured as Ruleset Validation,
where the prerequisite for MyCo is MyCoInt
and the prerequisite for MyCoInt is Pega-Platform.
The two application rulesets Claims and ClaimsInt are configured as Application Validation.
Which of the following statements is false?- ARules in ClaimsInt can reference rules in Claims
- BRules in MyCo can reference rules in MyCoInt
- CRules in MyCo can reference rules in Claims
- DRules in Claims can reference rules in MyCo
19Which statement describes a benefit of parallel development with branches?
- AA team of developers can implement application functionality without impacting developers in other teams.
- BDevelopers cannot update rules in rulesets that have been released to production.
- CUpdated rules are reviewed for guardrail warnings before they can be checked in.
- DDevelopers cannot check in an updated rule until the rule is unit tested.
20Team A and Team B are developing features for an insurance application. Team A is assigned a user story to improve the user experience when users enter personal and bank account details. Team B is assigned to build a declare expression to calculate the total premium amount. Both teams used branches for development.
What step does each team need to take before merging their changes to the main application?- AOnly Team B should resolve conflicts, and Team A can directly merge changes to the main application.
- BNeither team is required to resolve any conflicts and can directly merge the changes to the main application.
- CBoth teams must resolve conflicts that the system detects between their branch and the application.
- DOnly team A should resolve conflicts and team B can directly merge changes to the main application.
21Which two of the following are prerequisites for creating a branch rule for parallel development? (Choose Two)
- ASave a copy of the original rule into the base ruleset.
- BCreate a team application.
- CCreate an access group that references the team application. Add developers to the access group.
- DCircumstance the original rule.
22A branch ruleset is a ruleset that ______________ and __________. (Choose Two)
- Aprevent developers from seeing work of all team members
- Bis designed for large projects
- Cis based on another ruleset
- Dcontains rules that are not in active development
23Which two steps do you perform after you develop branch rules and before you merge a ruleset? (Choose Two)
- ACheck in rules to merge
- BUse DB trace to identify conflicts
- CCheck out rules to merge
- DReview conflicts and warnings
24Circumstancing allows you to customize the behavior of your application to address condition exceptions using a single complex rule.
- AVerdadero
- BFalso
25Which one of the following statements are true about single variable rule circumstancing?
- AA circumstanced rule is always created in the next higher ruleset version.
- BThe base rule is created by removing the circumstancing condition from a rule.
- CThe base rule is a backup rule in case the circumstanced rule is deleted.
- DThe name of the circumstanced rule remains the same as the name of the base rule.
26Which two of the following requirements are satisfied by configuring single-variable circumstancing of a rule? (Choose Two)
- AContractors located in the United States are sent Form 1A, contractors located in Canada are sent Form 1B, and contractors located in the United Kingdom are sent Form 1C.
- BDuring an auto insurance claim, if a customer is located in Canada, it is required that a collect information form prompts an agent to enter a date of last service.
- CIf an expense request exceeds USD1000, it is routed to the Business Manager. If the request exceeds USD10000, it is routed to the Vice President of Finance.
- DSilver-level customers have a guaranteed response time of 24 hours, whereas Gold-level customers have a guaranteed response time of 12 hours.
27Circumstancing provides a way to configure a complex rule with numerous permutations as several targeted, less-complex rules.
- AVerdadero
- BFalso
28Select and drag the circumstancing tasks to the drop areas, placing them in the correct order.
- AConfigure a circumstance template
- BConfigure a circumstance definition
- CConfigure a circumstance record
29Which of the following statements is true about circumstancing?
- AMultivariate circumstancing on start date and end date properties cannot also include additional circumstancing on a time property.
- BWhen a circumstanced rule is withdrawn, rule resolution selects the next non-circumstanced rule in a higher ruleset version.
- C.OrderDate is not a valid property to circumstance.
- DYou need a template for circumstancing on more than one property.
30In which of the following two situations do you use circumstancing? (Choose Two)
- AAttach PDF file of expense list to approval request when total amount is more than USD1,000.
- BThe sales tax rate changes at the first of next year.
- CFormat requirements change for postal code address when a user selects United States or Canada.
- DA new manager is assigned to the team from the first of next month until the end of the quarter.
- EEmployee PTO accrual rate varies by number of years in service.
31Which of the following statements is true about the relationship between base rules and circumstanced rules?
- AA base rule is created by removing circumstancing condition from a rule.
- BA new circumstanced rule always gets created in next higher ruleset version.
- CA base rule is needed as a backup if a circumstanced rule gets deleted.
- DThe name of circumstanced rule remains same as the base rule.
32The [blank_start]circumstance template[blank_end] is the rule that defines the properties used to determine if the circumstance is applicable, whereas the [blank_start]circumstance record[blank_end] defines values.
- Acircumstance template
- Bcircumstance record
33Based on the information below, if you execute the rule when .Dept=Accounting, which version does Pega Platform™ use?
Rule Version Circumstance
01-01-01 None
01-01-01 .Dept=Accounting
01-01-15 None
01-01-25 None, base rule selected
01-01-30 .Dept=Accounting
01-01-35 None- A01-01-30, .Dept=Accounting
- B01-01-25, None, base rule selected
- C01-01-01, None
- D01-01-01, .Dept=Accounting
34Based on the information below, if you execute the rule when .Dept=Engineering, which version does Pega Platform™ use?
Rule Version Circumstance
01-01-01 None
01-01-01 .Dept=Engineering
01-01-15 None
01-01-20 .Dept=Engineering
01-01-25 None, base rule selected
01-01-35 None- A01-01-01, None
- B01-01-35, None
- C01-01-20, .Dept=Engineering
- D01-01-01, .Dept=Engineering
35The rule resolution algorithm inputs rule instances and outputs a rule identifier, such as a the rule type and class, to process a case.
- AVerdadero
- BFalso
36Choose the correct statements (three)
- AThe rule resolution algorithm removes rule instances from the rule cache when a rule instance is updated.
- BThe rule resolution algorithm populates the rules cache with appropriate rule instances.
- CThe rule resolution algorithm inherits input from the rule cache to identify a rule instance.
- DWhen you create new rule instances, the rule instances are added to the rules cache.
- EWhen you create new rule instances, the key parts of the rule instance are used during rule resolution.
- FWhen you create new rule instances, the rule resolution process ranks the rule instance against existing rules.
- GRule resolution applies to the following rule instances: the Product Review section, the Employee Review case type, and a new employee operator.
- HRule resolution applies to the following rule instances: a Customer Information data page, the Product Review section, and the Mortgage Preapproval case type.
- IRule resolution applies to the following rule instances: the Account Status declare expression, a Medical Records Request case, and a Customer zip code property.
37Select the correct statement.
- ADuring rule resolution, the rule resolution algorithm discards rules that are unavailable and undefined in the class hierarchy.
- BDuring rule resolution, the rule resolution algorithm considers rules from all major and minor versions of rulesets in the user's ruleset list.
- CDuring rule resolution, the rule resolution algorithm creates a list of all rules that match the rule name.
- DDuring rule resolution, the rule resolution algorithm discards rules with the same rule name and rule type.
38The default rule candidate has no qualifiers and is the first rule to be executed.
- AVerdadero
- BFalso
39Based on the information in the table above, if you execute the rule when .Product = Available, which version does Pega Platform use?
- A02-01-10, .Product = Restricted
- B02-01-15, .Product = Available
- C02-01-20, None
- D02-01-10, .Product = Available
- E02-01-05, .Product = Available
- F02-01-05, .Product = Not Available
40Drag every applicable permission types on the right to each Rule availability on the left.
- AExecute, Edit, View, Copy
- BView, Edit, Copy 1
- CExecute, Edit, Copy 1
- DView, Edit, Copy 2
- EExecute, Edit, Copy 2
- FExecute, View
- GEdit, View
- HCopy, View
- IView, Edit, Copy 3
- JExecute, Edit, Copy 3
- KExecute, View, Copy 3
- LExecute, View, Copy 2
- MExecute, View, Copy 1
41Which two of the following statements about rule resolution are true? (Choose Two)
- AWhen a rule is marked as Withdrawn, any rule with the same purpose and a lower version number is not considered.
- BThe Availability setting is used to determine if a rule is available for use during rule resolution.
- CTo copy a rule, it must be marked as Available.
- DIf a rule marked as Blocked is selected during rule resolution, an error message is logged and execution continues.
42Which two of the following statements are true about the rule resolution process? (Choose Two)
- AIf a user does not have access to the selected rule, the system sends a message that the rule is not authorized for execution.
- BIf the system finds more than one rule instance during rule resolution, users are provided with a choice of which rule to use depending on context.
- CRule resolution applies to rules that are instances of classes derived from the Rule- and Work- base classes.
- DThe rule purpose takes precedence over the rule availability.
43Which rule availability setting can you use to force the system to look for an instance of the rule in the next highest class or ruleset?
- AFinal
- BWithdrawn
- CBlocked
- DAvailable
44Based on the image, given that Primary Page Class = MyCo-PL-Loan and Clipboard Value of Risk Property = High Risk, which rule executes?
- ANone. An error is logged.
- B2
- C4
- D5
45Based on the image, given that Primary Page Class = MyCo-PL-Loan and Clipboard Value of Risk Property = "", which rule executes?
- ANone. An error is logged.
- B2
- C4
- D5
Información
- Descripción
- Test sobre PEGA CSSA 8.6 part 1, creado por Pedro Henrique Lima el 08/11/2021.
- Autor
- Pedro Henrique Lima
- Idioma
- English
- Visitas
- 833
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test