Test
Sketchup
Este test tiene tipos de pregunta que se abren en el reproductor de siempre.
Preguntas del test (47)
1match the label with the button
- Ablock tool
- Beraser
- Carrow tool
- Dpush/pulltool
2Match the label with the button
- Aline tool
- Btext tool
- Coffset tool
- Dcurve tool
3Match the label with the button
- Ahalf tool
- Barc tool
- Cdiamond tool
- Dmove tool
4Match the label with the button
- ARectangle tool
- Bshape tool
- Cscale tool
- Doffset tool
5Match the label with the button
- Aselection tool
- Bmeasurement tool
- Corb tool
- Dturn tool
6match the label with the button
- Apaint tool
- Beraser tool
- Ceye glass tool
- Dzoom tool
7Which mark represents feet in sketchup?
- A"
- B'
- C#
- Dft
8Which mark represents inches in sketchup?
- A"
- B'
- Cin
- D#
9The measurement tool creates a .....
- Asolid line
- Bcurved line
- Cdotted line
10glass is for applying material that is
- Ainvisible
- Bsee through
- Cvery dark
11The blue line in sketchup means..
- Ahorizontal, left to right
- BVertical, up and down
- Cnothing
12Red lines in sketchup mean
- Ahorizontal lines
- Bvertical lines
- Cinvisible lines
13The green blocks indicate the _____________ tool has been selected.
- Amove
- Bscale
- Ccopy
- Dblock
14If we were to push in one of the green blocks the object should
- Aexplode
- Bdisappear
- Cget smaller
- Dget larger
15If we were to pull away one of the green blocks the object should
- Aget smaller
- Bget bigger
- Cdisappear
- Dexplode
16Which shape in the object shown can be pulled up under the current conditions
- Athe cube
- Bthe rectangle
- Cthe circle
17An object that is dotted can be pushed or pulled.
- AVerdadero
- BFalso
18match the label with the button
- Aonly for brick
- Bonly for color
- Cfor all materials
19On a MAC To copy in sketchup you can use the move tool with
- Aalt
- Boption
- Ccommand
- Desc
20match the label with the button
- Afreehand
- Bsnake
21Match the label with the button
- Acircle tool
- Bbutton tool
- C3d text
- Dlarge A tool
22Match the label with the buton
- ADimensions
- B3 tool
23The blue box around the object means......
- Ait has been formatted
- Bthe bucket tool was used
- Cit was grouped
- Dit was exploded
24A 3d object is
- Asomething coming at you in a movie
- Bsomething that has width, height and depth (length).
- Csomething that is not real
25To create a circle with a 4 foot diameter simple click and drag with the circle tool and type...
- A4'
- B2'
- C4
- D2
26To raise an object 2 feet of the ground pull it with the push pull tool, release and type
- A2
- B24
- C2 feet
- D2"
27When the circle tool is selected, if sides is 24 what shape will be drawn?
- Aa circle
- Ba star
- Ca rectangle
28When the circle tool is selected, if sides is 6 what shape will be drawn?
- Acircle
- Bhexagon
- Ctriangle
- Dstar
29When the circle tool is selected, if sides is 3 what shape will be drawn?
- Acircle
- Bsquare
- Ctriangle
- Doctagon
30When the circle tool is selected, if sides is 8 what shape will be drawn?
- Ahexagon
- Boctagon
- Cnothing
- Dcircle
31"All supported images type" is chosen when we want to import a
- Afont
- Ba 3d model
- C2d image
- Danimation
32According to the image what shape will be drawn
- Acircle
- Btriangle
- Crectangle
- Dhexagon
33Which of the following is not a material choice in sketchup?
- Aconcrete
- Bvegetation
- Cfur
- Dglass
34The shape was created by most likely using the
- Amove tool
- Bscale tool
- C2 point arc tool
- Dthe line tool
35drag answer to button
- AWarehouse
- Bpop up shapes
36These choices allow you to format the object with
- Ametal
- Bmany warm colors
- Ctransparent material
37The object on the left was created from the object on the right by
- Aadding a triangle
- Bby lifting the line with the move tool
- Ccutting away
38The shape produced will be a
- A5 foot triangle
- Ba square 5 inches by 5 inches
- Ca circle with a diameter of 10 feet
- Da square 5 feet by 5 feet
39The shape produced will be
- Asquare that is 6 by 6
- Ba circle with a 12 foot diameter
- Ca circle with a 6 foot diameter
40The blue lines were produced by
- Apainting
- Bformating with the bucket tool
- Ctriple clicking
41How many objects have been selected
- A1
- B2
- C3
- D15
42the follow me tool can change the top circle into a
- Atriangle
- Bpattern
- Cmany circles
- Dsphere
43The sphere was created using the
- Asphere tool
- Bline tool
- Cfollow me tool
44the unique shaoe was produced using the
- Acircle tool
- Bscale tool
- Cfollow me tool
45The peak in the object on the right was created from the object on the left by
- Aadding a pyramid
- Busing the pyramid tool
- Cusing the move tool
46Drag the answer to the button
- Ameasurements based on the U.S. system
- Bmeasurements based on ancient china
47Drag the answer to the button
- AInternational system of measurement
- BOnly used in American
Información
- Descripción
- quiz on sketchup
- Autor
- Samuel Melendez
- Idioma
- English
- Visitas
- 3.239
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test