Review Questions - Chapter 5 VLSMs, Summarization, and Troubleshooting TCP/IP

Descripción

Network Fundamentals 1.7 Apply troubleshooting methodologies to resolve problems 1.7.a Perform fault isolation and document 1.7.b Resolve or escalate 1.7.c Verify and monitor resolution 1.8 Configure, verify, and troubleshoot IPv4 addressing and subnetting
Kessi Silva
Test por Kessi Silva, actualizado hace más de 1 año
Kessi Silva
Creado por Kessi Silva hace más de 6 años
353
0

Resumen del Recurso

Pregunta 1

Pregunta
On a VLSM network, which mask should you use on point-to-point WAN links in order to reduce the waste of IP addresses?
Respuesta
  • /27
  • /28
  • /29
  • /30
  • /31

Pregunta 2

Pregunta
In the network shown in the diagram, how many computers could be in Network B?
Respuesta
  • 6
  • 12
  • 14
  • 30

Pregunta 3

Pregunta
In the following diagram, in order to have IP addressing that’s as efficient as possible, which network should use a /29 mask?
Respuesta
  • A
  • B
  • C
  • D

Pregunta 4

Pregunta
To use VLSM, what capability must the routing protocols in use possess?
Respuesta
  • Support for multicast
  • Multiprotocol support
  • Transmission of subnet mask information
  • Support for unequal load balancing

Pregunta 5

Pregunta
What summary address would cover all the networks shown and advertise a single, efficient route to Router B that won’t advertise more networks than needed?
Respuesta
  • 172.16.0.0/24
  • 172.16.1.0/24
  • 172.16.0.0/25
  • 172.16.0.0/20
  • 172.16.16.0/28
  • 172.16.0.0/27

Pregunta 6

Pregunta
In the following diagram, what is the most likely reason the station cannot ping outside of its network?
Respuesta
  • The IP address is incorrect on interface E0 of the router.
  • The default gateway address is incorrect on the station.
  • The IP address on the station is incorrect.
  • The router is malfunctioning.

Pregunta 7

Pregunta
If a host is configured with an incorrect default gateway and all the other computers and router are known to be configured correctly, which of the following statements is TRUE?
Respuesta
  • Host A cannot communicate with the router.
  • Host A can communicate with other hosts in the same subnet.
  • Host A can communicate with hosts in other subnets.
  • Host A can communicate with no other systems.

Pregunta 8

Pregunta
Which of the following troubleshooting steps, if completed successfully, also confirms that the other steps will succeed as well?
Respuesta
  • Ping a remote computer.
  • Ping the loopback address.
  • Ping the NIC.
  • Ping the default gateway.

Pregunta 9

Pregunta
When a ping to the local host IP address fails, what can you assume?
Respuesta
  • The IP address of the local host is incorrect.
  • The IP address of the remote host is incorrect.
  • The NIC is not functional
  • The IP stack has failed to initialize.

Pregunta 10

Pregunta
When a ping to the local host IP address succeeds but a ping to the default gateway IP address fails, what can you rule out? (Choose all that apply.)
Respuesta
  • The IP address of the local host is incorrect.
  • The IP address of the gateway is incorrect.
  • The NIC is not functional
  • The IP stack has failed to initialize

Pregunta 11

Pregunta
Which of the networks in the diagram could use a /29 mask?
Respuesta
  • Corporate
  • LA
  • SF
  • NY
  • None

Pregunta 12

Pregunta
What network service is the most likely problem if you can ping a computer by IP address but not by name?
Respuesta
  • DNS
  • DHCP
  • ARP
  • ICMP

Pregunta 13

Pregunta
When you issue the ping command, what protocol are you using?
Respuesta
  • DNS
  • DHCP
  • ARP
  • ICMP

Pregunta 14

Pregunta
Which of the following commands displays the networks traversed on a path to a network destination?
Respuesta
  • ping
  • traceroute
  • pingroute
  • pathroute

Pregunta 15

Pregunta
What command generated the output shown below?
Respuesta
  • traceroute
  • show ip route
  • ping
  • pathping

Pregunta 16

Pregunta
In the work area, match the command to its function on the right.
Respuesta
  • __________________________________________________________________________________ | traceroute | Shows you the PC network configuration | __________________________________________________________________________________ | arp -a | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________ | show ip arp | Displays the ARP table on a Cisco router | __________________________________________________________________________________ | ipconfig /all | Displays the list of routers on a path to a network destination | _________________________________________________________________________________
  • __________________________________________________________________________________ | traceroute | Displays the list of routers on a path to a network destination | __________________________________________________________________________________ | arp -a | Shows you the PC network configuration | __________________________________________________________________________________ | show ip arp | Displays the ARP table on a Cisco router | __________________________________________________________________________________ | ipconfig /all | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________
  • __________________________________________________________________________________ | traceroute | Displays the list of routers on a path to a network destination | __________________________________________________________________________________ | arp -a | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________ | show ip arp | Displays the ARP table on a Cisco router | __________________________________________________________________________________ | ipconfig /all | Shows you the PC network configuration | __________________________________________________________________________________
  • __________________________________________________________________________________ | traceroute | Displays the list of routers on a path to a network destination | __________________________________________________________________________________ | arp -a | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________ | show ip arp | Shows you the PC network configuration | __________________________________________________________________________________ | ipconfig /all | Displays the ARP table on a Cisco router | __________________________________________________________________________________

Pregunta 17

Pregunta
17. Which of the following network addresses correctly summarizes the three networks shown below efficiently? 10.0.0.0/16 10.1.0.0/16 10.2.0.0/16
Respuesta
  • 10.0.0.0/15
  • 10.1.0.0/8
  • 10.0.0.0/14
  • 10.0.0.8/16

Pregunta 18

Pregunta
What command displays the ARP table on a Cisco router?
Respuesta
  • show ip arp
  • traceroute
  • arp -a
  • tracert

Pregunta 19

Pregunta
What switch must be added to the ipconfig command on a PC to verify DNS configuration?
Respuesta
  • /dns
  • -dns
  • /all
  • showall

Pregunta 20

Pregunta
Which of the following is the best summarization of the following networks: 192.168.128.0through 192.168.159.0?
Respuesta
  • 192.168.0.0/24
  • 192.168.128.0/16
  • 192.168.128.0/19
  • 192.168.128.0/20
Mostrar resumen completo Ocultar resumen completo

Similar

La Segunda Guerra Mundial - EDUpunto.com
EDUpunto Por: Ernesto De Frías
Un Mundo de Posibilidades con las Fichas
Diego Santos
Adjectives and Adverbs (regular and irregular examples)
angel.cardenas.r
Test Ortografía
Omar Vazquez Flores
Vocabulario Pescados y Mariscos
ExamTime Reviewer
Cómo crear un Mapa Mental
gladis_lomeli
INGENIERÍA CIVÍL QUÍMICA
camila.bertiola
Ecosystems
ricardico55555
Introducción a los Derechos Humanos
Fernanda Tellechea
prueba 1
ANGELA HIDALGO
Arkikuntzen garaia
Amparo de Bran