¡GoConqr estrena diseño! Cuéntanos qué te parece.

Regístrate gratis

Fichas

Common G-Codes

Edward Guthrie CNC Machining Red Seal Inglés 55 fichas

Common G-Codes

Fichas del conjunto (55)

  1. 1G00Positioning at rapid speedG00
  2. 2G01Linear interpolationG01
  3. 3G02Circular interpolation CWG02
  4. 4G03Circular interpolation CCWG03
  5. 5G04DwellG04
  6. 6G09Exact StopG09
  7. 7G10Setting offsets in the programG10
  8. 8G12Circular Pocket Milling CW (Mill)G12
  9. 9G13Circular Pocket Milling CCW (Mill)G13
  10. 10G17X-Y plane for arc machiningG17
  11. 11G18Z-X plane for arc machiningG18
  12. 12G19Z-Y plane for arc machiningG19
  13. 13G20Inch UnitsG20
  14. 14G21Metric UnitsG21
  15. 15G27Reference return check
  16. 16G28Automatic return through reference point
  17. 17G29Move to location through reference point
  18. 18G31Skip functioning
  19. 19G32Thread cutting (Lathe)
  20. 20G33Thread Cutting (Mill)
  21. 21G40Cancel diameter offset (Mill)
    Cancel tool nose offset (Lathe)    G40
  22. 22G41Cutter compensation left (Mill)
    Tool nose radius compensation left (Lathe)    G41
  23. 23G42Cutter compensation right (Mill)
    Tool nose radius compensation right (Lathe)    G42
  24. 24G43Tool length compensation (Mill)G43
  25. 25G44Tool length compensation (Mill)
    -Sometimes G49-    G44
  26. 26G50Set coordinate system and max RPM (Lathe)
  27. 27G52Local coordinate system setting
  28. 28G53Machine coordinate system setting
  29. 29G54-59Workpiece coordinate system setting
    #1 - #6
  30. 30G61Exact stop check
  31. 31G65Custom macro call
  32. 32G70Finish cycle (Lathe)
  33. 33G71Rough turning cycle (Lathe)
  34. 34G72Rough facing cycle (Lathe)
  35. 35G73Irregular rough turning cycle (Lathe)
    Chip break drilling cycle (Peck)(Mill)
  36. 36G74Face grooving or chip break drilling (Lathe)
    Left hand tapping (Mill)
  37. 37G75OD groove pecking (Lathe)
  38. 38G76Fine boring cycle (Mill)
    Threading cycle (Lathe)
  39. 39G80Cancel cyclesG80
  40. 40G81Drill cycle
  41. 41G82Drill cycle with dwell (Mill)
  42. 42G83Peck drilling cycle (Mill)
  43. 43G84Tapping cycle
  44. 44G85Bore in, Bore out
  45. 45G86Bore in, rapid out
  46. 46G87Back boring cycle
  47. 47G90Absolute programming
  48. 48G91Incremental programming
  49. 49G92Reposition origin point (Mill)
    Thread cycle cutting (Lathe)
  50. 50G94Per minute feed (Mill)
  51. 51G95Per revolution feed (Mill)
  52. 52G96Constant surface speed control (Lathe)
  53. 53G97Constant surface speed cancel (Lathe)
  54. 54G98Per minute feed (Lathe)
  55. 55G99Per revolution feed (Lathe)

Información

Descripción
Here are the common use Preparatory Codes("g-codes") for both Machining Centers (Mills) and Turning Centers (Lathes.)
Creado por
Edward Guthrie
Visitas
77
Etiquetas
g-codecnc
Valoración

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?