Fichas
Cnc Class
Fichas del conjunto (40)
- 1What G-code is CCW Interpolation motion?G03
- 2Which of these G-codes are non modal?G53,G09,G04
- 3What M code is used to STOP the machine if OPT ON is ONM01
- 4What M code is used to STOP the spindleM05
- 5What G code selects Metric ProgrammingG21
- 6What M code is used to move the spindle in the Clockwise directionM03
- 7What G code selects Inch ProgrammingG20
- 8What G code selects the XY planeG17
- 9What G codes selects the ZX planeG18
- 10What G code is used for feeding in IPMG94
- 11What G code establishes a part programs origin (WCS)G55, G56, G54
- 12What G code returns to Macine Zero through a reference pointG28
- 13What M code is used to stop all functions of the machine while running in mem modeM00
- 14What M code floods the machine with CoolantM08
- 15What M code commands a Tool Change. This code is followed by a T addressM06
- 16What G code Compensates the tool to the Right of the partG42
- 17What G code is used to drill holes in your work pieceG81
- 18What G code is commanding DwellsG04
- 19What M code would you use to make a left hand thread with the spindleM04
- 20What G code is used to create internal threads (Tapping)G84
- 21What G code is used for Absolute Position programmingG90
- 22What G code is used to program in Inches Per Revolution (IPR)G95
- 23What G code cancels a modal linear interpolation command. This is a multiple answer question.G03 G04 G02
- 24What M code orients the spindle before tool changesM19
- 25What G code Compensates the Tool Length in your part programG43
- 26What G code selects the YZ planeG19
- 27What G code is CW Interpolation MotionG02
- 28What G code cancels a Canned CycleG80
- 29What G code is Linear InterpolationG01
- 30What G code is used for Incremental ProgrammingG91
- 31What G code cancels Cutter CompensationG40
- 32What G code Compensates the tool to the Left of the partG41
- 33What G code is rapid interpolationG00
- 34Max Rpm?G50
- 35Constant Surface SpeedG96
- 36Direct RPM commandG97
- 37Inches per MinG98
- 38Inches per RevG99
- 39Chuck OpenM10
- 40Chuck CloseM11
Información
- Descripción
- Fichas sobre Cnc Class, creado por Chris Calderon el 10/04/2018.
- Creado por
- Chris Calderon
- Visitas
- 1
- Etiquetas
- Valoración