Jakub Sabacinski
Test por , creado hace más de 1 año

Test sobre VCP New Questions 36-71, creado por Jakub Sabacinski el 30/07/2017.

256
8
0
Sin etiquetas
Jakub Sabacinski
Creado por Jakub Sabacinski hace casi 7 años
Cerrar

VCP New Questions 36-71

Pregunta 1 de 36

1

An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?

Selecciona una o más de las siguientes respuestas posibles:

  • vSphere standard switch port

  • ERSPAN

  • NSX Virtual Wire

  • VLAN

Explicación

Pregunta 2 de 36

1

An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:

vSphere Distributed Switch MTU supported status

The administrator has all of the VMkernel ports MTU sizes set to 1600.

Which action will remedy this problem?

Selecciona una o más de las siguientes respuestas posibles:

  • Configure the Distributed Switch to MTU 9100.

  • Disconnect and reconnect the physical network cable.

  • Configure the physical switch to MTU 1600.

  • Disable the Distributed Switch MTU.

Explicación

Pregunta 3 de 36

1

Which two partitions are used for the VMware vCenter Server Appliance embedded vPostgres database? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • /storage/seat/

  • /storage/netdump/

  • /storage/db/

  • /storage/core/

Explicación

Pregunta 4 de 36

1

Which two encryption keys does the host use when encrypting virtual machine files? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • Public Key Infrastructure Encryption Key (PKI)

  • Master Encryption Key (MEK)

  • Data Encryption Key (DEK)

  • Key Encryption Key (KEK)

Explicación

Pregunta 5 de 36

1

An ESXi host’s VMCA-Signed certificate has expired. How can the certificate be renewed?

Selecciona una o más de las siguientes respuestas posibles:

  • In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.

  • In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.

  • Run the command /sbin/generate-certificates on the affected host.

  • Disconnect the host from vCenter Server and reconnect it.

Explicación

Pregunta 6 de 36

1

When using “Cluster resource percentage” for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • Total vCPUs assigned to each VM.

  • Average CPU usage on each VM over time.

  • Memory reservations on each VM.

  • Total memory assigned to each VM.

  • Average active memory on each VM over time.

  • CPU reservations on each VM.

Explicación

Pregunta 7 de 36

1

Which iSCSI initiator type can be used with any network interface card?

Selecciona una o más de las siguientes respuestas posibles:

  • Software iSCSI initiator

  • Software FCoE adapter

  • Hardware Independent iSCSI initiator

  • Hardware Dependent iSCSI initiator

Explicación

Pregunta 8 de 36

1

Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • if a host failover is unsuccessful

  • if a virtual machine was removed from vCenter Server’s inventory

  • if a virtual machine was deployed from template, and the template has been deleted

  • if a virtual machine is unregistered directly on the host

Explicación

Pregunta 9 de 36

1

Which happens if the swap file of a virtual machine is inaccessible to the destination host during a vMotion?

Selecciona una o más de las siguientes respuestas posibles:

  • The swap file is stored with the virtual machine configuration file.

  • The swap file is copied to the destination host.

  • The vMotion will fail.

  • The swap file is replicated to a datastore accessible by both hosts.

Explicación

Pregunta 10 de 36

1

An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?

Selecciona una o más de las siguientes respuestas posibles:

  • Perform a storage rescan on VMFS volumes.

  • Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.

  • Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.

  • Perform a scan of new storage devices.

Explicación

Pregunta 11 de 36

1

An administrator notices that a virtual machine running SQL Server is not performing as expected.

vmware.log> vmx| W110: NUMA and VCPU hot add are incompatible. Forcing UMA

How can the administrator resolve this issue?

Selecciona una o más de las siguientes respuestas posibles:

  • Power off the virtual machine and disable vCPU hot plug.

  • Reinstall VMware Tools.

  • Modify the .vmx file to force NUMA and vCPU hot add to function.

  • Installation third party plug-in to enable NUMA and vCPU hot add to function.

Explicación

Pregunta 12 de 36

1

Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • Network > Move Network

  • VirtualMachine > Inventory > Move

  • Resource > Migrate powered on virtual machine

  • Datastore > Allocate Space

Explicación

Pregunta 13 de 36

1

In vSphere Data Protection 6.1, which is the function of a Backup Verification job?

Selecciona una o más de las siguientes respuestas posibles:

  • None. Backup Verification job is not a feature of vSphere Data Protection

  • It is a manual task- Power it on-Verify the guest OS- Check started applications

  • It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OS is booted by communicating with the Backup Verification agent

  • It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Explicación

Pregunta 14 de 36

1

An administrator has decided to use Auto Deploy in the environment. Which two considerations must be taken into account before configuring Auto Deploy? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • Hosts in a cluster must be connected to a Distributed Switch.

  • Host profiles are not supported when using Auto Deploy.

  • DHCP must be configured to support PXE boot.

  • Storage DRS must be enabled.

  • A TFTP server must be setup and running.

Explicación

Pregunta 15 de 36

1

When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • Local Windows OS users and groups

  • Configuration

  • Custom ports

  • FQDN

  • Historical and Performance data

Explicación

Pregunta 16 de 36

1

Which are two Storage DRS requirements? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • Datastore clusters must have datastores of the same size and I/O capacities.

  • NFS and VMFS datastores cannot be combined in the same datastore cluster.

  • Datastores shared across multiple datacenters cannot be included in a datastore cluster.

  • NFS and vSAN datastores can be combined in the same datastore clusters.

  • A dedicated TCP/IP stack is required for datastore clusters.

Explicación

Pregunta 17 de 36

1

Which is the correct order for upgrading vSphere components?

Selecciona una o más de las siguientes respuestas posibles:

  • vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware

  • VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server

  • vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts

  • ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools

Explicación

Pregunta 18 de 36

1

Which are four attributes of the Active vCenter HA node? (Choose four.)

Selecciona una o más de las siguientes respuestas posibles:

  • It uses the vCenter HA network to communicate with the Witness node.

  • It constantly replicates vPostgres data with the Witness node.

  • It uses a public IP address for the management interface.

  • It runs the active vCenter Server Appliance instance.

  • It uses the vCenter HA network for replication of data.

  • It provides a quorum to protect against split-brain situations.

Explicación

Pregunta 19 de 36

1

Which two datastore types are supported by Storage I/O Control v2? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • vSAN

  • RDM

  • NFS

  • Virtual Volumes

  • VMFS

Explicación

Pregunta 20 de 36

1

An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?

Selecciona una o más de las siguientes respuestas posibles:

  • vSphere 6.5 does not support manual UN MAP

  • The manual UN MAP operation has been moved to the vSphere web client.

  • The VASA version is use is incompatible.

  • UN MAP is automated for VMFS6.

Explicación

Pregunta 21 de 36

1

An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?

Selecciona una o más de las siguientes respuestas posibles:

  • from the ESXi Host Client

  • from the VMware vSphere Appliance Management Interface

  • from within the VMware vSphere Web

  • from the vCenter Server Appliance Installer

Explicación

Pregunta 22 de 36

1

Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

  • Remote Content Library

  • Published Content Library

  • Local Content Library

  • Shared Content Library

  • Subscribed Content Library

Explicación

Pregunta 23 de 36

1

Which is the block size on the VMFS6 datastore?

Selecciona una o más de las siguientes respuestas posibles:

  • All small and large file blocks are 8MB.

  • All small and large file blocks are 1MB.

  • Small file blocks are 512KB. large file blocks are 64MB

  • Small file blocks are 1MB, large file blocks are 512MB.

Explicación

Pregunta 24 de 36

1

When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?

Selecciona una o más de las siguientes respuestas posibles:

  • to manage conversion tasks remotely

  • to convert virtual machines as well as physical machines

  • to allow installation of the Converter agent on remote source machines

  • to hot clone physical or virtual machines

Explicación

Pregunta 25 de 36

1

An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?

Selecciona una o más de las siguientes respuestas posibles:

  • /var/log/fdm.log

  • /var /log/vpxa.log

  • /var /log/hostd.log

  • /var /log/auth.log

Explicación

Pregunta 26 de 36

1

An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?

Selecciona una o más de las siguientes respuestas posibles:

  • The upgrade has changed the vmhba name.

  • vSphere 6.5 automates iSCSI configurations.

  • vSphere 6.5 no longer supports software iSCSI.

  • The upgrade has deleted the vmhba.

Explicación

Pregunta 27 de 36

1

Which is required for configuring iSCSI Software Adapter network port binding?

Selecciona una o más de las siguientes respuestas posibles:

  • VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.

  • VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.

  • VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.

  • VMkernel of the iSCSI traffic must be bound to only one active network adapter.

Explicación

Pregunta 28 de 36

1

In vSphere Data Protection 6.1, which is the function of a Backup Verification job?

Selecciona una o más de las siguientes respuestas posibles:

  • None. Backup Verification job is not a feature of vSphere Data Protection

  • It is a manual task
    – Power it on
    – Verify the guest OS
    – Check started applications

  • It is an automatic process
    – Restore a virtual machine
    – Power it on
    – Verify that the guest OS is booted by communicating with the Backup Verification agent

  • It is an automatic process
    – Restore a virtual machine
    – Power it on
    – Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Explicación

Pregunta 29 de 36

1

When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?

Selecciona una o más de las siguientes respuestas posibles:

  • Microsoft SQL Server Express 2012R2

  • Microsoft SQL Server Standard 2012R2

  • PostgreSQL

  • Oracle DB 11g

Explicación

Pregunta 30 de 36

1

A VM-Host affinity rule states that VM group 'X' must run on hosts in group 'Y'. If all ESXi hosts in group 'Y' fail, which is the resulting behavior with vSphere HA enabled?

Selecciona una o más de las siguientes respuestas posibles:

  • The virtual machines in group 'X' will failover to hosts that do not belong to group 'Y', but will vMotion back to hosts in group 'Y' when they become available.

  • The virtual machines in group 'X' will not failover to hosts that do not belong to group 'Y'.

  • This scenario is not possible because vSphere HA and DRS cannot work together.

  • The virtual machines in group 'X' will only fail over to hosts that do not belong to group 'Y' if they are marked as "High" VM Restart Priority within vSphere HA.

Explicación

Pregunta 31 de 36

1

An administrator wants to ensure that any virtual machine added to a certain port group always has sufficient network resources. Network I/O Control version 3 has been enabled on the Distributed switch.
Which three steps will achieve this objectives? (Choose three)

Selecciona una o más de las siguientes respuestas posibles:

  • Reserve bandwidth for virtual machine system traffic on the Distributed Switch Port Group.

  • Edit the virtual machine's Resource settings and set a reservation for virtual machine system traffic.

  • Create a Network Resource Pool on the Distributed Switch and se a reservation quota.

  • Reserve bandwidth for virtual machine system traffic on the Distributed Switch.

  • Add the Network Resource Pool on the Distributed Switch Port Group.

Explicación

Pregunta 32 de 36

1

An administrator would like to configure vSphere HA to use two isolation addresses. How would this affect the behavior of HA?

Selecciona una o más de las siguientes respuestas posibles:

  • If both isolation addresses are not reachable, the host will be restarted by the HA agent.

  • If both isolation addresses are not reachable, the host will use the vCenter Server IP address as a final isolation address before being marked isolated.

  • If only one of the isolation addresses is reachable, the host will not be marked isolated by HA.

  • If only one of the isolation addresses is reachable, the host will be considered in an isolated by HA.

Explicación

Pregunta 33 de 36

1

ESXi hosts with 10Gbps network cards are attached to a distributed switch. The administrator has upgraded to NIOC3 and wants to allow vMotion traffic to use as much bandwidth as possible but must ensure that other services always have sufficient bandwidth. How can this be done?

Selecciona una o más de las siguientes respuestas posibles:

  • Configure shares on the distributed switch for the vMotion traffic type.

  • Configure limits on the distributed switch on the on vMotion traffic type.

  • Associate vMotion traffic with a network resource pool and use CoS tagging.

  • Set shares on user-defined network resource pool and associate it with vMotion traffic.

Explicación

Pregunta 34 de 36

1

Which is the purpose of VM Component Protection (VMCP)?

Selecciona una o más de las siguientes respuestas posibles:

  • Reconnect virtual NICs that become disconnected

  • Respond when a datastore encounters a PDL or APD failure.

  • Restart applications when they are no longer running.

  • Respond when viruses are detected inside a virtual machine.

Explicación

Pregunta 35 de 36

1

Which is the predefined user name when publishing a Content Library?

Selecciona una o más de las siguientes respuestas posibles:

  • admin

  • root

  • administrator

  • vcsp

Explicación

Pregunta 36 de 36

1

A domain user is able to successfully log into the vSphere Web Client, but notices that the vCenter Server system does not appear in the inventory. Which is the cause of this situation?

Selecciona una o más de las siguientes respuestas posibles:

  • The Service Control Agent service is not running.

  • The vCenter Server does not have any hosts added to inventory yet.

  • The domain user has read-only permissions on vCenter Server.

  • The domain user does not have vCenter Server permissions.

Explicación