VCP New Questions 36-71

Description

Quiz on VCP New Questions 36-71, created by Jakub Sabacinski on 30/07/2017.
Jakub Sabacinski
Quiz by Jakub Sabacinski, updated more than 1 year ago
Jakub Sabacinski
Created by Jakub Sabacinski over 6 years ago
256
8

Resource summary

Question 1

Question
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?
Answer
  • vSphere standard switch port
  • ERSPAN
  • NSX Virtual Wire
  • VLAN

Question 2

Question
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert: vSphere Distributed Switch MTU supported status The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?
Answer
  • Configure the Distributed Switch to MTU 9100.
  • Disconnect and reconnect the physical network cable.
  • Configure the physical switch to MTU 1600.
  • Disable the Distributed Switch MTU.

Question 3

Question
Which two partitions are used for the VMware vCenter Server Appliance embedded vPostgres database? (Choose two.)
Answer
  • /storage/seat/
  • /storage/netdump/
  • /storage/db/
  • /storage/core/

Question 4

Question
Which two encryption keys does the host use when encrypting virtual machine files? (Choose two.)
Answer
  • Public Key Infrastructure Encryption Key (PKI)
  • Master Encryption Key (MEK)
  • Data Encryption Key (DEK)
  • Key Encryption Key (KEK)

Question 5

Question
An ESXi host’s VMCA-Signed certificate has expired. How can the certificate be renewed?
Answer
  • In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
  • In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
  • Run the command /sbin/generate-certificates on the affected host.
  • Disconnect the host from vCenter Server and reconnect it.

Question 6

Question
When using “Cluster resource percentage” for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)
Answer
  • Total vCPUs assigned to each VM.
  • Average CPU usage on each VM over time.
  • Memory reservations on each VM.
  • Total memory assigned to each VM.
  • Average active memory on each VM over time.
  • CPU reservations on each VM.

Question 7

Question
Which iSCSI initiator type can be used with any network interface card?
Answer
  • Software iSCSI initiator
  • Software FCoE adapter
  • Hardware Independent iSCSI initiator
  • Hardware Dependent iSCSI initiator

Question 8

Question
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)
Answer
  • if a host failover is unsuccessful
  • if a virtual machine was removed from vCenter Server’s inventory
  • if a virtual machine was deployed from template, and the template has been deleted
  • if a virtual machine is unregistered directly on the host

Question 9

Question
Which happens if the swap file of a virtual machine is inaccessible to the destination host during a vMotion?
Answer
  • The swap file is stored with the virtual machine configuration file.
  • The swap file is copied to the destination host.
  • The vMotion will fail.
  • The swap file is replicated to a datastore accessible by both hosts.

Question 10

Question
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?
Answer
  • Perform a storage rescan on VMFS volumes.
  • Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
  • Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
  • Perform a scan of new storage devices.

Question 11

Question
An administrator notices that a virtual machine running SQL Server is not performing as expected. vmware.log> vmx| W110: NUMA and VCPU hot add are incompatible. Forcing UMA How can the administrator resolve this issue?
Answer
  • Power off the virtual machine and disable vCPU hot plug.
  • Reinstall VMware Tools.
  • Modify the .vmx file to force NUMA and vCPU hot add to function.
  • Installation third party plug-in to enable NUMA and vCPU hot add to function.

Question 12

Question
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)
Answer
  • Network > Move Network
  • VirtualMachine > Inventory > Move
  • Resource > Migrate powered on virtual machine
  • Datastore > Allocate Space

Question 13

Question
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?
Answer
  • None. Backup Verification job is not a feature of vSphere Data Protection
  • It is a manual task- Power it on-Verify the guest OS- Check started applications
  • It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OS is booted by communicating with the Backup Verification agent
  • It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Question 14

Question
An administrator has decided to use Auto Deploy in the environment. Which two considerations must be taken into account before configuring Auto Deploy? (Choose two.)
Answer
  • Hosts in a cluster must be connected to a Distributed Switch.
  • Host profiles are not supported when using Auto Deploy.
  • DHCP must be configured to support PXE boot.
  • Storage DRS must be enabled.
  • A TFTP server must be setup and running.

Question 15

Question
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)
Answer
  • Local Windows OS users and groups
  • Configuration
  • Custom ports
  • FQDN
  • Historical and Performance data

Question 16

Question
Which are two Storage DRS requirements? (Choose two.)
Answer
  • Datastore clusters must have datastores of the same size and I/O capacities.
  • NFS and VMFS datastores cannot be combined in the same datastore cluster.
  • Datastores shared across multiple datacenters cannot be included in a datastore cluster.
  • NFS and vSAN datastores can be combined in the same datastore clusters.
  • A dedicated TCP/IP stack is required for datastore clusters.

Question 17

Question
Which is the correct order for upgrading vSphere components?
Answer
  • vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
  • VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
  • vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
  • ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools

Question 18

Question
Which are four attributes of the Active vCenter HA node? (Choose four.)
Answer
  • It uses the vCenter HA network to communicate with the Witness node.
  • It constantly replicates vPostgres data with the Witness node.
  • It uses a public IP address for the management interface.
  • It runs the active vCenter Server Appliance instance.
  • It uses the vCenter HA network for replication of data.
  • It provides a quorum to protect against split-brain situations.

Question 19

Question
Which two datastore types are supported by Storage I/O Control v2? (Choose two.)
Answer
  • vSAN
  • RDM
  • NFS
  • Virtual Volumes
  • VMFS

Question 20

Question
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?
Answer
  • vSphere 6.5 does not support manual UN MAP
  • The manual UN MAP operation has been moved to the vSphere web client.
  • The VASA version is use is incompatible.
  • UN MAP is automated for VMFS6.

Question 21

Question
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?
Answer
  • from the ESXi Host Client
  • from the VMware vSphere Appliance Management Interface
  • from within the VMware vSphere Web
  • from the vCenter Server Appliance Installer

Question 22

Question
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)
Answer
  • Remote Content Library
  • Published Content Library
  • Local Content Library
  • Shared Content Library
  • Subscribed Content Library

Question 23

Question
Which is the block size on the VMFS6 datastore?
Answer
  • All small and large file blocks are 8MB.
  • All small and large file blocks are 1MB.
  • Small file blocks are 512KB. large file blocks are 64MB
  • Small file blocks are 1MB, large file blocks are 512MB.

Question 24

Question
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?
Answer
  • to manage conversion tasks remotely
  • to convert virtual machines as well as physical machines
  • to allow installation of the Converter agent on remote source machines
  • to hot clone physical or virtual machines

Question 25

Question
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?
Answer
  • /var/log/fdm.log
  • /var /log/vpxa.log
  • /var /log/hostd.log
  • /var /log/auth.log

Question 26

Question
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?
Answer
  • The upgrade has changed the vmhba name.
  • vSphere 6.5 automates iSCSI configurations.
  • vSphere 6.5 no longer supports software iSCSI.
  • The upgrade has deleted the vmhba.

Question 27

Question
Which is required for configuring iSCSI Software Adapter network port binding?
Answer
  • VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
  • VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
  • VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
  • VMkernel of the iSCSI traffic must be bound to only one active network adapter.

Question 28

Question
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?
Answer
  • None. Backup Verification job is not a feature of vSphere Data Protection
  • It is a manual task – Power it on – Verify the guest OS – Check started applications
  • It is an automatic process – Restore a virtual machine – Power it on – Verify that the guest OS is booted by communicating with the Backup Verification agent
  • It is an automatic process – Restore a virtual machine – Power it on – Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Question 29

Question
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?
Answer
  • Microsoft SQL Server Express 2012R2
  • Microsoft SQL Server Standard 2012R2
  • PostgreSQL
  • Oracle DB 11g

Question 30

Question
A VM-Host affinity rule states that VM group 'X' must run on hosts in group 'Y'. If all ESXi hosts in group 'Y' fail, which is the resulting behavior with vSphere HA enabled?
Answer
  • The virtual machines in group 'X' will failover to hosts that do not belong to group 'Y', but will vMotion back to hosts in group 'Y' when they become available.
  • The virtual machines in group 'X' will not failover to hosts that do not belong to group 'Y'.
  • This scenario is not possible because vSphere HA and DRS cannot work together.
  • The virtual machines in group 'X' will only fail over to hosts that do not belong to group 'Y' if they are marked as "High" VM Restart Priority within vSphere HA.

Question 31

Question
An administrator wants to ensure that any virtual machine added to a certain port group always has sufficient network resources. Network I/O Control version 3 has been enabled on the Distributed switch. Which three steps will achieve this objectives? (Choose three)
Answer
  • Reserve bandwidth for virtual machine system traffic on the Distributed Switch Port Group.
  • Edit the virtual machine's Resource settings and set a reservation for virtual machine system traffic.
  • Create a Network Resource Pool on the Distributed Switch and se a reservation quota.
  • Reserve bandwidth for virtual machine system traffic on the Distributed Switch.
  • Add the Network Resource Pool on the Distributed Switch Port Group.

Question 32

Question
An administrator would like to configure vSphere HA to use two isolation addresses. How would this affect the behavior of HA?
Answer
  • If both isolation addresses are not reachable, the host will be restarted by the HA agent.
  • If both isolation addresses are not reachable, the host will use the vCenter Server IP address as a final isolation address before being marked isolated.
  • If only one of the isolation addresses is reachable, the host will not be marked isolated by HA.
  • If only one of the isolation addresses is reachable, the host will be considered in an isolated by HA.

Question 33

Question
ESXi hosts with 10Gbps network cards are attached to a distributed switch. The administrator has upgraded to NIOC3 and wants to allow vMotion traffic to use as much bandwidth as possible but must ensure that other services always have sufficient bandwidth. How can this be done?
Answer
  • Configure shares on the distributed switch for the vMotion traffic type.
  • Configure limits on the distributed switch on the on vMotion traffic type.
  • Associate vMotion traffic with a network resource pool and use CoS tagging.
  • Set shares on user-defined network resource pool and associate it with vMotion traffic.

Question 34

Question
Which is the purpose of VM Component Protection (VMCP)?
Answer
  • Reconnect virtual NICs that become disconnected
  • Respond when a datastore encounters a PDL or APD failure.
  • Restart applications when they are no longer running.
  • Respond when viruses are detected inside a virtual machine.

Question 35

Question
Which is the predefined user name when publishing a Content Library?
Answer
  • admin
  • root
  • administrator
  • vcsp

Question 36

Question
A domain user is able to successfully log into the vSphere Web Client, but notices that the vCenter Server system does not appear in the inventory. Which is the cause of this situation?
Answer
  • The Service Control Agent service is not running.
  • The vCenter Server does not have any hosts added to inventory yet.
  • The domain user has read-only permissions on vCenter Server.
  • The domain user does not have vCenter Server permissions.
Show full summary Hide full summary

Similar

Old vs New Hollywood
Jemma Ward
1 Samuel (1-15 Saul) Quiz
Jeffery Sparks
Latex formulas
Chris Smith
Biological Molecules Topic List (Chapter 3)
Reuben_
Glacial Processes
vina_56
New GCSE course to take 2017, notes and understanding
Carmen Trinh
Describing a person
Danijela Jambrušić
Ten tricky true or false questions for horse owners.
horsesmadeeasyte
Enzymes Topic List (Chapter 4)
Reuben_
Mapa mental 1
Estela Quintero