¡GoConqr estrena diseño! Cuéntanos qué te parece.

Regístrate gratis

Test

CCNP CH4

Ali Sahar 9 preguntas

Hacer el test

Preguntas del test (9)

  1. 1What is the final step when configuring policy-based routing?
    1. ADefine access lists.
    2. BConfigure policy with the use of the route-map command.
    3. CApply policy to an interface using ip policy route-map command.
    4. DApply match commands.
  2. 2Which prefix-list entry will be used when multiple entries in a prefix list match a given prefix?
    1. Aall matching entries
    2. Bentry with the lowest sequence number
    3. Centry with the largest sequence number
    4. Dentry with the longest prefix mask length
  3. 3Which method of redistribution is least likely to introduce a routing loop into a network?
    1. Aone-way
    2. Btwo-way
    3. Cone-point
    4. Dmultipoint
  4. 4Which command would allow advertising only an aggregate address of 192.168.0.0/16 when applied by using a neighbor statement that contains prefix-list [prefix-list name] out?
    1. Apermit 192.168.0.0/0 le 16
    2. Bpermit 192.168.0.0/16
    3. Cpermit 192.168.0.0/16 ge 16
    4. Dpermit 192.168.0.0/16 eq 16
  5. 5Which is the default seed metric for an OSPF route that is redistributed into an EIGRP autonomous system?
    1. Ainfinity
    2. B1
    3. C20
    4. D90
    5. E110
    6. F170
  6. 6Which command would deploy a prefix list in a BGP environment?
    1. Aip prefix-list distribute
    2. Bip bgp prefix-list distribute
    3. Cneighbor [ip address] prefix-list prefix-list-name [in/out]
    4. Dneighbor [ip address] prefix-list-name [in/out]
  7. 7A router has learned the route 192.168.254.0 /24 from multiple sources.
    These sources are as follows:

    - RIPv1 route with a metric of 12
    - EIGRP with a metric of 125689
    - OSPF E2 route with a metric of 125
    - EIGRP external route with a metric of 3489
    - OSPF type 1 route with a metric of 632
    - OSPF route with a metric of 4

    What route will be injected into the routing table?
    1. AD with metric of 125689
    2. BE1 with a metric of 632
    3. CE2 with a metric of 125
    4. DEX with a metric of 3489
    5. EO with a metric of 4
    6. FR with metric of 12
  8. 8Which criterion must be met before a route can be redistributed into another routing protocol?
    1. Abe directly connected
    2. Bbe learned through a dynamic routing protocol
    3. Cexist in the routing table
    4. Dbe learned from a different routing protocol than the protocol into which it is redistributed
    5. Ehave an administrative distance that is greater than that of the routing protocol into which it is being
      redistributed
  9. 9Which statement best describes the route tag in a RIPv2 packet?
    1. AThe route tag contains a 32-bit mask that identifies the network and subnet portion of the IP address.
    2. BIt contains the IP address of the next hop that is listed in the IP Address field.
    3. CIt differentiates between a request for a full routing table or a partial routing update due to a topology
    4. DIt indicates how many internetwork hops or routers have been traversed in the trip to the destination.
    5. EIt differentiates between routes that are learned within the autonomous system and those that were redistributed into the routing process.

Información

Descripción
CH4
Idioma
English
Visitas
254
Valoración
Aún sin valoraciones
Valora este test
Valora este test

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?