¡GoConqr estrena diseño! Cuéntanos qué te parece.

Test

3.8 Boiler Control systems

TRAVIS CANNING 9 preguntas

Hacer el test

Preguntas del test (9)

  1. 1A rapid increase in boiler load causes an immediate increase in steam flow from the boiler, which creates a sudden ____ in the boiler steam drum pressure
    1. Adrop
    2. Bincrease
    3. Cchange
    4. Dtemperature
  2. 2In a fuel flow - airflow combustion control system, the fuel flow signal makes the final adjustment to the ________
    1. Afeedwater
    2. Bfuel
    3. Cairflow
    4. Ddrum level
  3. 3In a fuel flow - airflow combustion control system, the fuel and airflows are measured directly and are converted to ________ signals by means of square root extractors
    1. Adigital
    2. Bparallel
    3. Cproportional
    4. Doutput
  4. 4By measuring and comparing the steam and the _____, it is possible to obtain efficient combustion in a boiler by maintaining a proper steam to airflow ratio
    1. Afeedwater
    2. Bfuel
    3. Cairflow
    4. Ddrum level
  5. 5With On - Off boiler feed water control, water is supplied ______ to the boiler, either by fully opening or fully closing a valve in the feedwater line.
    1. Apartially
    2. Bintermittenly
    3. Cfully
    4. Dsteadily
  6. 6A sudden increase in load, a decrease in drum pressure, and an immediate increase in heat release is called ________
    1. Arate
    2. Bswell
    3. Cshrinkage
    4. Dcondensing
  7. 7Gas bypass method involves the seperation of the convection section of the boiler into two, or more, ______ gas passes
    1. Areverse
    2. Bcrossing
    3. Cparallel
    4. Dcounter
  8. 8The furnace pressure controller will adjust the boiler ____ dampers to keep the pressure constant at all boiler loads
    1. Aoutlet
    2. Binlet
    3. Cair
    4. Dburner
  9. 9An oxygen analyzer can also be provided to indicate the excess oxygen in the flue gas, assisting the operator to control the excess air and increasing boiler _________
    1. Aload
    2. Bfiring
    3. Ctemperature
    4. Defficiency

Información

Descripción
Test sobre 3.8 Boiler Control systems, creado por TRAVIS CANNING el 27/01/2016.
Idioma
English
Visitas
29
Valoración
Aún sin valoraciones
Valora este test
Valora este test

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?