Test
Identity Manager Administrator
Este test tiene tiempo límite, así que se abre en el reproductor de siempre.
Preguntas del test (117)
1When data changes in the Identity Vault or a connected application, which processes the
changes?- ADrivers
- BRemote Loader
- CIdentity Vault
- DMetadirectory Engine
- EConnected application
2Which statement is true?
- AWhen an event occurs in the Identity Vault, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Publisher channel to a driver shim. - BWhen an event occurs in the Identity Vault, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to a driver shim. - CWhen an event occurs in a connected system, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to a driver shim. - DWhen an event occurs in the Identity Vault, a driver shim creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to Identity
Manager. - EWhen an event occurs in a connected system, a Driver Shim creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to Identity
Manager.
- AWhen an event occurs in the Identity Vault, Identity Manager creates an XML document that
3Which statements are true? (Choose 2.)
- AWhen an event is being sent to a driver, it is a notification.
- BWhen an event is being sent to a driver, it is a command.
- CWhen an event is being sent to Identity Manager, it is a command.
- DWhen an event is being sent to Identity Manager, it is a notification.
- EEvents and commands are handled the same way within an IDM 4 environment.
4What does a Driver object contain? (Choose 2.)
- APackages
- BDriver Set
- CPolicy Objects
- DApplication driver shim
- ESubscriber and Publisher objects
5Identity Manager uses a MetaDirectory Engine to process Identity Vault data and events. What
component assures changes in the Identity Vault are not lost if a connected system goes offline?- APartition
- BObit flag
- CChange Log
- DEvent Cache
6An Identity Manager Job can only interact with which driver channel?
- AInput
- BSender
- COutput
- DReceiver
- EPublisher
- FPlacement
- GSubscriber
7Which installation mode is supported by the integrated installer?
- ASilent mode
- BNon-root mode
- CConsole mode
- DAutoYaST mode
- EStandalone mode
8Which statements about the Integrated Installer are true? (Choose 2.)
- AIt automatically handles dependencies
- BIt automatically installs all of the drivers
- CThe iManager plug-in needs to be manually installed
- DIt exists only for the Windows operating system family
9Which task within Novell iManager allows administrators to view all objects that are associated
with a particular Novell IDM driver?- AObject Inspector
- BDriver Inspector
- CDriverSet Inspector
- DDriver Cache Inspector
10What is the minimum RAM system requirement for Designer?
- A128 MB
- B256 MB
- C512 MB
- D1024 MB
- E2048 MB
11When using Designer, which modeling mode is used to do all low-level operations with driver sets,
drivers, policies and applications?- ATable Mode
- BSystem Mode
- CDataFlow Mode
- DArchitect Mode
- EDeveloper Mode
12Which view enables you to view the filters that allow the data to flow between all of the systems
and the Identity Vaults as well as view how passwords flow through the different systems?- AProject view
- BOutline view
- CDataflow view
- DNavigator view
- EPolicy Set view
13When using Designer, a perspective is a collection of related views and editors. Which perspective
should be open the first time you run the application?- ADebug perspective
- BDesigner perspective
- CJava/Java Browsing perspective
- DJava Type Hierarchy perspective
- EPlug-in Development perspective
14Which view do you use to access Policy Simulator? (Choose 2.)
- AThe Tasks view
- BThe Outline view
- CThe Project view
- DThe Navigator view
- EThe Policy Flow view
15When you start Designer for the first time or start Designer without a project listed, which should you first do?
- AMake sure that the Debug perspective is selected.
- BMake sure that the Plug-in perspective is selected.
- CMake sure that the Designer perspective is selected.
- DMake sure that the Java/Java Browsing perspective is selected.
- EMake sure that the Java Type Hierarchy perspective is selected.
16When using Designer, which view do you use to import driver sets, drivers, and channels from the
file system?- AThe Tasks view
- BThe Project view
- CThe Outline view
- DThe Navigator view
- EThe Policy Flow view
17When checking in a project to a Version Control Server, you will need to specify a file path to your
Subversion server or a URL to the Subversion server. If you specify a URL, which protocols are
supported? (Choose 4.)- AFTP
- BNFS
- CSVN
- DHTTP
- ESFTP
- FHTTPS
- GSVN + SSH
18When is the package catalog created?
- AWhen a package is installed
- BWhen a driver object is created
- CWhen a Driver Set object is created
- DWhen a project is created or imported
19Which statement is true regarding packages?
- AYou can downgrade any package that has been upgraded.
- BYou can delete packages from the package catalog at anytime.
- CYou can only upgrade packages that have been added to drivers.
- DBefore you can import packages into the package catalog, you must install them.
20When you install Active Directory drivers, you must choose an authentication method.
Authentication identifies the driver shim to Active Directory and, potentially, to the local machine.
Which statements are true regarding the Negotiate authentication method? (Choose 2.)- AThis is the preferred authentication method.
- BThis can be installed on a server that is not a member of the domain.
- CThis uses Kerberos, NTLM, or a pluggable authentication scheme if one is installed.
- DThis is used when the server hosting the driver shim is not a member of the domain.
- EWhen using this, some provisioning services, such as Exchange mailbox provisioning and
password synchronization, are unavailable
21If you map the eDirectory attribute of Login Expiration Time to the Active Directory attribute of
accountExpires, when does the account in Active Directory expire?- AA day later than the time set in eDirectory
- BA day earlier than the time set in eDirectory
- CAn hour later than the time set in eDirectory
- DAt the same time as the time set in eDirectory
- EAn hour earlier than the time set in eDirectory
22Which method can be used to start the process of installing Active Directory driver packages?
- AIn the Modeler, right-click the driver set where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard. - BIn the Modeler, right-click the Identity Vault where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard. - CIn the Modeler, right-click the server where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard. - DIn the Modeler, right-click the application where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard. - EIn the Modeler, right-click the package catalog where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard.
- AIn the Modeler, right-click the driver set where you want to create the driver; then
23When installing Active Directory driver packages, you can also install optional features for the Active Directory driver. Which feature should you select if you are using the Identity Reporting Module?
- AData Collection
- BAccount Tracking
- CDefault Configuration
- DPassword Synchronization
- EEntitlements and Exchange Mailbox Support
24In which order should you create and start an Active Directory driver?
- AImport the current driver packages 2) Install the driver packages 3) Deploy the driver 4)
Configure the driver 5) Start the driver - B1) Install the driver packages 2) Import the current driver packages 3) Deploy the driver 4)
Configure the driver 5) Start the driver - C1) Install the driver packages 2) Import the current driver packages 3) Deploy the driver 4) Start
the driver 5) Configure the driver - D1) Import the current driver packages 2) Install the driver packages 3) Configure the driver 4)
Deploy the driver 5) Start the driver - E1) Import the current driver packages 2) Install the driver packages 3) Deploy the driver 4) Start
the driver 5) Configure the driver
- AImport the current driver packages 2) Install the driver packages 3) Deploy the driver 4)
25When installing the Active Directory Driver, which options are available when you are selecting the
desired form for the placement of new objects? (Choose 2.)- AFlat
- BLevel
- CParallel
- DMirrored
- EStructured
- FBi-directional
- GSingle Organizational Unit
26In an Active Directory environment, which tools enable you to view and manage the associations
between drivers and objects? (Choose 2.)- ADesigner
- BDriver Inspector
- CObject Inspector
- DPolicy Simulator
- EActive Directory Discovery tool
27Which allows you to securely store multiple passwords for a driver?
- ANamed Passwords
- BUniversal Password
- CPassword Policy object
- DEvent Auditing Service
- EPassword Synchronization
28To which can you add Named Passwords? (Choose 2.)
- AServer
- BDrivers
- CDriver Sets
- DApplications
- EIdentity Vaults
29You have noticed that a server is not listed in the Servers tab on the driver or driver set. Which
may resolve this issue?- ARevert back to an older driver.
- BRevert back to an older driver set.
- CDelete the problem driver and reinstall it.
- DDelete the related driver set and then reinstall it.
- EDisassociate the driver set object and the server and then re-associate them.
30Which statements are true regarding Global Configuration Values (GCVs)? (Choose 2.)
- AGCVs are variables.
- BGCVs are constant values.
- CGCVs can be changed at runtime.
- DGCVs are accessible to the tree and network.
- EGCVs are globally accessible to the driver and driver set.
31Which correctly shows the precedence of Global Configuration Values (GCVs)?
- A1) GCVs from the driver set Global Configuration list 2) GCVs from the driver Global
Configuration list 3) GCVs from the driver 4) GCVs from the driver set - B1) GCVs from the driver set Global Configuration list 2) GCVs from the driver Global
Configuration list 3) GCVs from the driver set 4) GCVs from the driver - C1) GCVs from the driver 2) GCVs from the driver set 3) GCVs from the driver Global
Configuration list 4)GCVs from the driver set Global Configuration list - D1) GCVs from the driver 2)GCVs from the driver Global Configuration list 3) GCVs from the
driver set 4)GCVs from the driver set Global Configuration list
- A1) GCVs from the driver set Global Configuration list 2) GCVs from the driver Global
32Which drivers have Remote Loader capability? (Choose 3.)
- AJDBC
- BLDAP
- CeDirectory
- DActive Directory
- EEntitlement Services
33Which pre-defined jobs operate at the driver set level? (Choose 2.)
- ADriver Health
- BSchedule Driver
- CSubscriber Channel Trigger
- DRandom Password Generator
- EPassword Expiration Notification
34What type of Identity Manager Event does a Subscriber Trigger Event Job create?
- Async
- Bquery
- Cmodify
- Dstatus
- Etrigger
- Ftriggerless
35Using iManager, what do you need to select to allow you to see the Filter icons so that you can
edit filters?- AThe Driver
- BThe Driver Set
- CThe Application
- DThe Identity Vault
36Which statements about filters are true? (Choose 2.)
- AYou cannot export a filter from a driver.
- BYou can configure a filter policy for a driver set.
- CYou can add a class or attribute to a filter policy.
- DThere are separate filter policies for the Publisher and the Subscriber channels.
- EThe same filter policy is used for both the Publisher and the Subscriber channels.
37Which policy primarily handles the conversion of data formats from data that the Metadirectory
engine provides to data that the application shim expects?- ACreation policy
- BMatching policy
- CPlacement policy
- DInput Transformation policy
- EEvent Transformation policy
- FOutput Transformation policy
38When an XML document has an input tag type, which are supported inputs? (Choose 4.)
- A<add>
- B<copy>
- C<find>
- D<delete>
- E<format>
- F<modify>
- G<rename>
39What is wrong with this add event?
<nds>
<input>
<add class-name="" event-id="idv-jdbc-staff#Publisher#696" qualified-src-dn="O=vault\OU=employees\CN=overtestra" src-dn="\IDVVAULT\vault\employees\overtestra" src-entry-id="136443">
<association state="pending"></association>
<add-attr attr-name="CN">
<value naming="true" timestamp="1206986293#34" type="string">overtestra</value>
</add-attr>
</add>
</input>
</nds>- AThe Class name is missing.
- BThe timestamp is incorrect
- CThe association state is pending.
- DThe src-dn is improperly formatted.
40Which Policy Sets are applied only during an add event?
- AMatching, Create, and Placement
- BInput Transformation, Matching, and Create
- CMatching, Create, and Schema Transformation
- DInput Transformation, Schema Transformation, and Command Transformation
41When creating an argument within a rule, which is an example of a noun token?
- AMap
- BJoin
- CClass Name
- DLowercase
- EEscape Source DN
42Which types of tokens are in the Argument Builder? (Choose 2.)
- AVerb
- BNoun
- CAction
- DChange
- EAttribute
- FPlacement
- GReplacement
43What are benefits of using Policy Builder? (Choose 2.)
- AIt is built on open standards.
- BIt enforces password complexity.
- CIt is a GUI with command line capabilities.
- DIt minimizes the need for XLST stylesheets.
- EIt provides a graphical interface to help data cleansing.
- FIt provides a graphical interface for rapid development of policies.
44What is a purpose of the DAL (Directory Abstraction Layer)?
- ATo process work flows
- BTo grant/revoke entitlements
- CTo store entities attribute data for use in work flows
- DTo provide a customized view of objects and their attributes that are stored in the Identity Vault
45Which options might you find in a Role Membership? (Choose 2.)
- AEnd Date
- BStart Date
- CProxy User
- DWorkflow Status
- ESeparation of Duties
46Which User Application configuration object contains Provisioning Request Definitions?
- AAppDefs
- BServiceDefs
- CRequestDefs
- DResourceDefs
- EWorkFlowDefs
47Which aspects of the User Application can be controlled by customizing the themes in the User
Application?- AModifying the HTML layouts for individual portlets.
- BAssigning different themes to different users upon login to the User Application.
- CChanging the colors and logos used by the User Application pages, headers, footers and tabs.
- DRestricting the pages and tabs that are available to a particular user upon login to the User
Application.
48Which allows you to delete, activate, inactivate and retire existing provisioning request definitions?
- AUser Application Driver
- BUser Application Portlets
- CWorkflow Administration plug-in
- DProvisioning Request Configuration plug-in
49The User Application Security Model uses domains to create sets of configurations and
permissions that can be assigned to different user types. Under the Provisioning domain, which
permission allows the user to retract selected provisioning requests when they are in progress?- ARetract PRD
- BInitiate PRD
- CConfigure Delegate
- DView Running PRD
- EConfigure Availability
50The Requests & Approvals tab in the Identity Manager user application includes a group of actions
called My Settings. The My Settings actions give you the ability to view your proxy and delegate
assignments. What is the difference between a proxy and a delegate?- AA delegate assignment is independent of process requests.
- BA delegate assignment applies to a particular type of request.
- CA delegate assignment can only be given to a Team Manager.
- DA Provisioning Manager can only define delegate assignments
- EA delegate assignment can only be given to a Provisioning Manager.
51The Roles hierarchy supports three levels. Which represents the highest role level?
- AKaiser Role
- BBusiness Role
- CResource Role
- DTechnical Role
- EWorkflow Role
52Which System Role allows members to create, remove, or modify SoD constraints?
- ARole Auditor
- BRole Manager
- CSecurity Officer
- DProvisioning Administrator
- EUser Application Administrator
53Which statement is true regarding role relationships?
- ARoles cannot contain other roles.
- BMid-level roles can contain lower-level and higher-level roles.
- CBottom-level roles can be contained by higher-level roles and other bottom-level roles.
- DTop-level roles can contain lower-level roles, but they cannot be contained by other roles.
54What role does NMAS play in synchronizing passwords in an Identity Manager solution?
- ANMAS controls the flow of synchronizing passwords within Identity Vault.
- BNMAS controls the flow of password synchronization in a connected system, based on NMAS
driver settings. - CNMAS prevents legacy utilities that are not Universal Password-enabled from updating an NDS
password directly. - DNMAS controls the flow of password synchronization, and prevents legacy utilities that are not
Universal Password-enabled from updating a password directly. - ENMAS controls the flow of password synchronization in a connected system, and prevents
legacy utilities that are not Universal Password-enabled from updating an NDS password directly.
55Only one policy is effective for a user at a time. Novell Modular Authentication Services (NMAS)
determines which policy is effective for a user by looking for policies in the following order and
applying the first one it finds. In which order does NMAS look for password policies?- A1) Partition root container
2) Container
3) Specific user assignment
4) Login Policy Object - B1) Specific user assignment
2) Login Policy Object
3) Partition root container
4) Container - C1) Login Policy Object
2) Specific user assignment
3) Container
4) Partition root container - D1) Specific user assignment
2) Container
3) Partition root container
4) Login Policy Object - E1) Login Policy Object
2) Partition root container
3) Container
4) Specific user assignment
- A1) Partition root container
56Which are advantages of using NDS password to synchronize passwords between two Identity
Vaults? (Choose 2.)- ASimple configuration.
- BUniversal and Distribution password updates
- CE-mail notifications for password synchronization failures
- DEnforcement of the basic password restrictions you can set for NDS Password
- EPassword reset on the connected Identity Vault if the passwords don't comply with NMAS
password policy
57Which allows you to change Universal Password in eDirectory? (Choose 2.)
- AiFilter
- BDesigner
- CiManager
- DNWAdmin
- EIDM User Application
58Which Identity Manager reporting component retrieves the data needed for report generation from
the Identity Information Warehouse?- AReporting Service
- BReport Packaging Tool
- CData Collection Service
- DIdentity Vault Data Sources
- EData Collection Service Driver
59Which report cannot be deleted and should not be run by itself?
- ATemplate
- BIdentity Vault User Report
- CIdentity Vault Driver Associations Report
- DCorrelated Resource Assignment Events by User
60What does the Calendar page of the Reporting Module show? (Choose 2.)
- AReport size
- BReport settings
- CDeleted reports
- DFinished reports
- EReports that failed
61Which statement is true regarding the token timeout strategy that is implemented by the Identity
Reporting Module?- AThe token associated with each user login times out automatically after a specific period of idle
time. - BThe token associated with each user login times out automatically after each event that affects
the user object. - CThe token associated with each user login times out automatically after a specific period of
time, after the user logs out. - DThe token associated with each user login times out automatically after a specific period of
time, regardless of what the user does.
- AThe token associated with each user login times out automatically after a specific period of idle
62Which Identity Manager component allows your organization to assure that user access to
resources does not break any corporate or government regulations?- AWorkflow
- BAttestation
- CSelf Service
- DData Synchronizing
- EAuditing and Reporting
63When using Designer, what option allows you to manage and view the file resources that are in
your workspace?- AOutline View
- BProject View
- CDataflow View
- DProperties View
- ENavigation View
64When using Designer, what option allows you to modify projects or other items that are listed in
the Navigator or Project view?- AViews
- BEditors
- CBuilders
- DWizards
65Which contains the components of Identity Manager drivers organized according to the
functionality you want to provide to a driver?- ADriver Set
- BPackages
- CEntitlements
- DUser Application
- ERoles Based Provisioning Module
66Which statement is true regarding creating packages?
- APackages can be created using Designer or iManager.
- BPackages must be created before a Driver can function.
- CPackages can only be created for Drivers and Driver Sets.
- DPackages can only be created in environments that have IDM 3.0 or later.
- EPackages can only be created when the Identity Vault is in development mode.
67You are trying to add content to a package. You have created content in an item. You right-click
that item and select Add to Package; however, no packages are showing in the list. What is the
cause of this problem?- AYou must build a package before you can add content to it.
- BYou must version a package before you can add content to it.
- CYou must create a package in Designer before you can add content to it.
- DYou must import a package into Designer before you can add content to it.
68Which packages can be published?
- APackages that have been built
- BPackages that have been created
- CPackages that have been imported
- DPackages that have been localized
69When installing the Active Directory Driver, which options can you choose when selecting the
desired form for the placement of new objects? (Choose 2.)- AFlat
- BLevel
- CParallel
- DMirrored
- EStructured
- FBi-directional
- GSingle Organizational Unit
70Which entitlement agent is ideal for simple automation?
- AWorkflow
- BDIRXML-EntitlementRef
- CRole-Based Entitlement
- DRoles-Based Provisioning Module
71Which statement about entitlements is true?
- AEntitlements are used as the association key for the user objects.
- BeDirectory schema is extended the first time Entitlements are invoked.
- CThe DirXML-EntitlementRef attribute keeps track of the entitlements that a user has been
granted or revoked. - DEntitlements that grant or revoke Group Membership will always take precedence over policies
that grant or revoke Group Memberships.
72Which statement is true when creating your own Entitlements?
- AYou create Entitlements using iMonitor.
- BYou can only create Entitlements on the Publisher channel.
- CYou must add the Entitlements to a driver set for them to work.
- DYou must add a policy to the driver for the Entitlements to work.
73Which domain defines rights to launch attestation requests and view the status of attestation
requests?- ARole Domain
- BResource Domain
- CCompliance Domain
- DProvisioning Domain
- EConfiguration Domain
74For which domains is it not possible to create Domain Managers? (Choose 3.)
- ARole
- BResource
- CSecurity
- DCompliance
- EConfiguration
75Which users have access to the team configuration page? (Choose 2.)
- ARole Manager
- BTeam Manager
- CSecurity Administrator
- DResource Manager
- EProvisioning Manager
76Which of the following can create teams? (Choose 3.)
- ATeam Manager
- BRole Administrator
- CSecurity Administrator
- DProvisioning Manager
- EResource Administrator
- FCompliance Administrator
77In the Navigation Access Permissions page, who has access to the administration tab? (Choose
2.)- ASecurity Administrator
- BResource Administrator
- CCompliance Administrator
- DProvisioning Administrator
- EConfiguration Administrator
78At runtime, which performs all of the User Application’s LDAP queries against the Identity Vault?
- AThe publisher filter
- BThe Role Catalogue
- CThe Abstraction Layer Protocol
- DUser Application Administration
- EThe Directory Abstraction Layer
79Which defines the Provisioning request categories the user application can display?
- ADriver Filter
- BRole Catalog
- CPackage Catalog
- DGlobal Configuration Values
- EThe Directory Abstraction Layer
80In which of the following is the directory abstraction layer editor plug-in available?
- AiMonitor
- BDesigner
- CiManager
- DRole Mapping Administrator
- EUser Application Administrator
81Which is used to define Directory Abstraction Layer definitions?
- AFilter Editor
- BPolicy Editor
- CIntegration Activity Editor
- DDirectory Abstraction Layer Editor
- EProvisioning Request Definition Editor
82Which do you use to create and deploy provisioning requests to the User Application driver?
- AFilter Editor
- BPolicy Editor
- CUser Application Editor
- DDirectory Abstraction Layer Editor
- EProvisioning Request Definition Editor
83Which are directory objects that encapsulate the business rules for granting or revoking a
corporate resource or role, and binding the corporate resource or role to a workflow?- ARole Mapping Definitions
- BProvisioning Request Definitions
- CData Abstraction Layer Definitions
- DGlobal Configuration Values Definitions
84When adding a control to a form that is being created, Designer adds a control-named Field to the
bottom line of the form. Where is the name that is entered into this field used? (Choose 3.)- AThe ECMA expression builder dialog box
- BThe Create Resource Wizard’s General tab
- CThe Workflow tab’s Data Item Mapping dialog box
- DIn the Role Mapping Administration Authorization panel
- EAn internal XML reference in the provisioning request definition file
85Which statements are true regarding workflows? (Choose 3.)
- AAn activity represents a task.
- BA process consists of activities and flow paths.
- CA flow path ties activities in a workflow together.
- DAn activity represents the work to be processed.
- EAn activity can have only one incoming and one outgoing flow path.
86Which rules need to be followed when adding activities to a workflow? (Choose 3.)
- AA workflow cannot contain a condition activity.
- BEach Approval activity must have a Condition activity.
- CEach Branch activity must have a corresponding Merge activity.
- DEach workflow must have at least one Entitlement or Entity activity.
- EEach workflow must have only one Start activity and only one Finish activity.
87Which rules need to be followed when adding flow paths to a workflow? (Choose 3.)
- AThere can be multiple flow paths out of the Start activity.
- BThere can be only one flow path out of the Merge activity.
- CThere can be only one flow path out of the Branch activity.
- DThere can be only one flow path out of the Entitlement activity.
- EThere can be between one and five flow paths out of the Approval activity.
88The Integration activity automatically creates an action model for working with a Web service
based on which document format?- ACSV
- BTXT
- CXMI
- DXML
- EWSDL
89In the Standard SoD Constraint Exception Approval Workflow Activity, which Activity Name determines whether the approval is a quorum condition?
- ALocalize SoD Name
- BApprove SoD Conflict
- CCheck for Processing Type
- DApprove SoD Conflict (Serial)
- EApprove SoD Conflict (Quorum)
90Which statement is true regarding the Novell Identity Manager Role Mapping Administrator?
- AIf you have both Role Manager and Resource Manager roles, you can create, edit, and delete
mappings. - BIf you have both Role Manager and Resource Administrator roles, you can create, edit, and
delete mappings. - CIf you have both Role Administrator and Resource Manager roles, you can create, edit, and
delete mappings. - DIf you have both Role Administrator and Resource Administrator roles, you can create, edit, and
delete mappings.
- AIf you have both Role Manager and Resource Manager roles, you can create, edit, and delete
91Within the Role Mapping Administrator, which displays the roles that you are authorized to
manage?- ASystems list
- BMappings list
- CAuthorization list
- DIdentity Vault Roles list
92Which application is used to map authorizations to Identity Vault Roles?
- AiFilter
- BiManager
- CDesigner
- DUser Applications
- ERole Mapping Administrator
93Using regular expressions, which will the following expression match? (Choose 2.)
of*- Aof
- Boff
- Coften
- Doffset
- Eoffers
94Using regular expressions, which matches ‘a’ or ‘b’?
- A“a\b”
- B“a.b”
- C“a*b”
- D“a|b”
- E“a:b”
95Using regular expressions, which phone number should the following match?
.*[89]00.*[0-9]{3}.*[0-9]{4}- A800-123-4567
- B901-123-4567
- C701-123-4567
- D808-123-4567
- E809-123-4567
96What version of the W3C XPATH Recommendation does Identity Manager use?
- A1.0
- B1.1
- C1.5
- D2.0
- E2.1
- F3.5
97Which XPATH operator is used to select all descendent nodes at any depth below the current
stated node?- A*
- B|
- C@
- D&
- E//
98If there is a name conflict between different variable sources in an XPATH statement, what is the
order of precedence?- ALocal (policy scope), Global, Local (driver scope)
- BGlobal, Local (driver scope), Local (policy scope)
- CLocal (driver scope), Local (policy scope), Global
- DGlobal, Local (policy scope), Local (driver scope)
- ELocal (policy scope), Local (driver scope), and global
99Which are some best practices for using version control with Designer? (Choose 2.)
- AUse the Tortoise Subversion client.
- BUse the Subversion command line when possible.
- CEnable Subclipse before using version control with Designer.
- DAssign one person to deploy a project to a production environment.
- EAssign one team member to a policy rather than having multiple team members work on one
policy.
100The following options are found within the forms tab of the Provisioning Request Definition Editor:
Form Selection
Fields tab
Actions tab
Events tab
Scripts tab
Which option allows you to add, delete, and change the data type, control type, and layout order of
the controls on the form?- AFields tab
- BEvents tab
- CScripts tab
- DActions tab
- EForm Selection
101Which default URL is used to access the iManager web application at 192.168.1.1?
- Ahttp://192.168.1.1/
- Bhttp://192.168.1.1/nps/iManager.html
- Chttps://192.168.1.1/nps/iManager.html
- Dhttps://192.168.1.1:8443/iManager.html
- Ehttps://192.168.1.1:8443/nps/iManager.html
102Which statements are true regarding Designer? (Choose 2.)
- ADesigner allows you to test policies off-line.
- BDesigner allows you to perform any task on the live system.
- CDesigner allows you to test and deploy solutions to production or test environments.
- DDesigner does not allow existing solutions to be imported from the network into Designer.
103When using Designer, what you can import at the Driver level?
- APolicies only
- BChannels and policies only
- CDriver sets and drivers only
- DA project from an Identity Vault
- EDriver sets, drivers, channels, and policies only
104What is the naming convention for a Global Configuration Value (GCV)?
- A<name>.<group>.[<subgroup>.][<purpose/scope>]
- B<group>.[<subgroup>.][<purpose/scope>.]<name>
- C<group>.[<subgroup>.]<name>.[<purpose/scope>]
- D[<purpose/scope>.]<group>.[<subgroup>.]<name>
- E<name>.[<purpose/scope>.][<subgroup>.]<group>
105You want to see password synchronization information when running a trace. What is the
minimum trace level that will provide this information?- ALevel 0
- BLevel 1
- CLevel 2
- DLevel 3
- ELevel 4
- FLevel 5
106Which statements are true when using Global Configuration Values (GCVs)? (Choose 2.)
- AGCVs can only be set on the Driver Set.
- BIf you set GCVs on the Driver Set object, those values cannot be inherited by a driver.
- CIf you set GCVs on the Driver Set object, those values are inherited by a driver and replace any
existing values. - DIf a driver has no settings of its own and inherits the GCVs from the driver set, iManager does
not display them. - EIf you set GCVs on the Driver Set object, those values are inherited by a driver in that driver set
if the driver does not have values of its own.
107What eDirectory entities can Password Policies be assigned to? (Choose 3.)
- ARoles
- BUsers
- CGroups
- DPartition Root Object
- ELogin Policy Object
108Which statements are true about Provisioning Request Definitions? (Choose 2.)
- AThey are used to launch attestation workflows.
- BThey are used to grant or revoke corporate roles.
- CThey are used to provide policy rules.
- DThey are used to filter requests at the driver level.
- EThey are used to define Global Configuration Values.
109Which is most commonly used to access ECMAScript?
- AiMonitor
- BiManager
- CExpression Builder
- DUser Application Manager
- EDirectory Abstraction Layer (DAL)
110The Roles Based Provisioning Module includes a read-only Role Approval workflow. Which option
does this Role Approval workflow support? (Choose 2.)- AThe ability to display the role using localized display names
- BThe ability to process SoD conflicts in either serial or quorum mode
- CThe ability to process role approvals in either serial or quorum mode
- DThe retrieval of SoD approver DNs from the request object (nrfRequest)
- EE-mail notification to all approvers per SoD conflict found for SoD workflow approvals
111When using the Role Mapping Administrator to create a new role, you will need to select a level for
the role. Which level defines lower-level privileges?- AIT Role
- BMapping Role
- CSystems Role
- DBusiness Role
- EPermission Role
112Given the XML Document below:
<nds dtdversion="3.5" ndsversion="8.x">
<source>
<product version="3.5.10.20070918 ">DirXML</product>
<contact>Novell, Inc.</contact>
</source>
<input>
<add class-name="User" qualified-src-dn="O=DA\OU=USERS\CN=E123456" src-dn="\DA-
TREE\DA\USERS\E123456" src-entry-id="34042" from-merge="true">
<add-attr attr-name="Facsimile Telephone Number">
<value type="structured">
<component name="faxNumber">801-555-1212</component>
<component name="faxBitCount">0</component>
<component name="faxParameters"/>
</value>
</add-attr>
<add-attr attr-name="Full Name">
<value type="string">Frank Jones</value>
</add-attr>
<add-attr attr-name="Given Name">
<value type="string">Frank</value>
</add-attr>
<add-attr attr-name="Internet EMail Address">
<value type="string">Frank.Jones@da.org</value>
</add-attr>
<add-attr attr-name="Surname">
<value type="string">Jones</value>
</add-attr>
</add>
</input>
</nds>
Within the Policy Builder Rule Conditions, what value will the XPATH Statement "@from-
merge='true'" return?- Anull
- Btrue
- Cfalse
- Derror
- Esuccess
113In which order does the metadirectory engine apply policies?
- A1) Matching policy 2) Placement policy 3) Creation policy
- B1) Matching policy 2) Creation policy 3) Placement policy
- C1) Creation policy 2) Placement policy 3) Matching policy
- D1) Creation policy 2) Matching policy 3) Placement policy
- E1) Placement policy 2) Creation policy 3) Matching policy
- F1) Placement policy 2) Matching policy 3) Creation policy
114Which statement is true regarding the output that DSTrace generates?
- AEach policy can have only one rule.
- BEach rule is processed multiple times per event.
- CRules will only be executed if their condition logic evaluates to be true.
- DIDM engine trace levels 0 through 3 show policies as they are being applied.
115Which connected systems support bidirectional password synchronization? (Choose 3.)
- APeopleSoft
- BLotus Notes
- CJDBC databases
- DSAP
- ENovell eDirectory
- FMicrosoft Active Directory
- GNetwork Information Services (NIS)
116Which user type works with the User Application’s Identity Self-Service, Work Dashboard, and
Roles and Resource tabs and has no administrative permissions?- ADesigners
- BTeam Manager
- CBusiness Users
- DDomain Manager
117Which statement is true regarding regular expressions?
- AMust be case sensitive
- BCan match entire string
- CCannot use wildcard characters
- DCannot be changed by escape characters
Información
- Descripción
- IDM Test sobre Identity Manager Administrator, creado por Giovanni Gonzalez Moreno el 16/03/2017.
- Idioma
- Español
- Visitas
- 49
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test