28336036
Description
Flashcards by That Yeti Dog Person, updated more than 1 year ago
|
|
Created by That Yeti Dog Person
over 3 years ago
|
|
| Question | Answer |
| A _____ battery contains several wet storage cells in a plastic case. | storage |
| The individual cells of a storage battery are housed in _______ or a _______ to prevent the electrolyte from leaking through the case. | acid-proof plastic, hard rubber case |
| A cover made from _______ is sealed at the top of the storage battery. | acid-proof material |
| A _______ is the space below the cell plates in a storage battery. These spaces catch the material that's dropped/shed by plates, and prevent disruption of the chemical action of the battery. | sediment chambers |
| The connections between the positive and negative plate cells are called _______. (made of lead) | cell connectors |
| After the cell connectors are welded in, the _______ are sealed around the case with an acid-proof compound. this makes the joint leak-proof. | cell cover |
| The cell covers are then fitted with ____ or ____. These allow an electrician to add water to the electrolyte as needed. | caps, plugs |
| _____ or _______ batteries are commonly seen in the industrial setting. these batteries are completely sealed except for a small vent hole. | Sealed, maintenance-free |
| Electrical equipment is usually connected to the battery by _____ or _____. | straps, cables |
| A _____ is made of wires braided or woven together. | strap |
| A _____ is made of many strands of wire twisted together. | cable |
| To connect a standard battery to a piece of equipment, an insulated cable is from the positive battery terminal to the machine circuit. A _____ is connected from the negative terminal to the ground or frame of the machine. | ground strap |
| The two types of clamps used to attach cables to battery terminals are the ______ type and the ______ type. | nut-and-bolt, spring-ring |
| Some car models contain ______ batteries. This means that the terminals are located on the sides of the battery case. | side-terminal |
| ______ permanently secured to the ends of the cables of a side-terminal battery. | Cap screws |
| The _____ of a storage battery is the amount of current the battery can produce. | capacity |
| Capacity is usually stated in ______. | ampere-hours |
| An ______ is a current of 1 ampere maintained for 1 hour. | ampere-hour |
| ______ are useful for removing corroded or stuck clamps (both the nut-and-bolt and spring-ring types) on a battery. | Clamp pullers |
Want to create your own Flashcards for free with GoConqr? Learn more.