Quiz
Edesign
Este quiz tem tipos de pergunta que abrem no player de sempre.
Perguntas do quiz (29)
1Consumer needs are technical specifications of what the customer expects of the product.
- AVerdadeiro
- BFalso
2Before you delve into the details of producing a solution, you need to make sure you have enough information to generate ambiguous problem definition that addresses the real need.
- AVerdadeiro
- BFalso
3You should include objectives in the problem statement to provide direction toward the solution.
- AVerdadeiro
- BFalso
4A customer need describes a current situation that is unsatisfactory, and is customary written in a positive tone.
- AVerdadeiro
- BFalso
5In design, objectives are quantifiable set of performance expectations.
- AVerdadeiro
- BFalso
6Design problems are close-ended problems with multiple solutions.
- AVerdadeiro
- BFalso
7Variant design is a design that takes existing product and seeks an incremental advance in performance through a refinement in working principle
- AVerdadeiro
- BFalso
8Constraints are attributes of design that are basis for concepts selection.
- AVerdadeiro
- BFalso
9Objectives are value-free compact descriptors of performance associated with objectives.
- AVerdadeiro
- BFalso
10A goal statement should specifically address the real need yet be broad enough not to preclude certain solutions.
- AVerdadeiro
- BFalso
11A problem statement should be clear and specific enough to allow for creative solutions
- AVerdadeiro
- BFalso
12Goals are the specifications a design solution must meet or the attributes is must posses to be considered successful.
- AVerdadeiro
- BFalso
13An objective is a concrete statement describing what the project is trying to achieve and why
- AVerdadeiro
- BFalso
14Steps of the design process
[blank_start]Recognize the need[blank_end]
[blank_start]problem statement-[blank_end] [blank_start]goal, objective, constraints[blank_end]
[blank_start]plan the project[blank_end]
[blank_start]gather information[blank_end]
[blank_start]conceptualize alternatives[blank_end]
[blank_start]evaluate alternatives[blank_end]
[blank_start]select best alternative[blank_end]
[blank_start]communication[blank_end]
[blank_start]implement preferred desgin[blank_end]- ARecognize the need
- Bproblem statement-
- Cgoal, objective, constraints
- Dplan the project
- Egather information
- Fconceptualize alternatives
- Gevaluate alternatives
- Hselect best alternative
- Icommunication
- Jimplement preferred desgin
15SMART characteristics
S- [blank_start]specific[blank_end]
M- [blank_start]measurable[blank_end]
A- [blank_start]achievable[blank_end]
R- [blank_start]realistic[blank_end]
T- [blank_start]time framed[blank_end]- Aspecific
- Bmeasurable
- Cachievable
- Drealistic
- Etime framed
16Customer need is an expression of [blank_start]a want[blank_end] and is expressed in [blank_start]ambiguous[blank_end] language.
- Aa want
- Bambiguous
17List 5 steps of identifying customer needs
1. [blank_start]Gather raw data[blank_end]
2. [blank_start]Interpret raw data[blank_end] in terms of what product has to do
3. [blank_start]Organize into hierarchy[blank_end]
4. [blank_start]Establish relative importance[blank_end]
5. [blank_start]Reflect[blank_end]- AGather raw data
- BInterpret raw data
- COrganize into hierarchy
- DEstablish relative importance
- EReflect
18What are the steps for developing product specifications
1. [blank_start]Establish target specifications[blank_end]
2. [blank_start]Refinement[blank_end]- AEstablish target specifications
- BRefinement
19Steps for refining product specifications
1. [blank_start]Develop a technical model[blank_end]
2. [blank_start]Develop an economic model[blank_end]
3. [blank_start]Finalize specifications, perform trade[blank_end] offs
4. [blank_start]Reflect[blank_end]- ADevelop a technical model
- BDevelop an economic model
- CFinalize specifications, perform trade
- DReflect
201.
2.
3.
4.
5.
- AEngineering requirements
- BCustomer requirments
- CMatrix of requirements
- DEngineering targets
- ECompetitive benchmarks
21QFD is one tool for transforming [blank_start]customer needs[blank_end] to [blank_start]engineering specifications[blank_end]. In the most basic form, the QFD shows coupling between [blank_start]customer requirements[blank_end] and the [blank_start]engineering requirements[blank_end].
- Acustomer needs
- Bengineering specifications
- Ccustomer requirements
- Dengineering requirements
22Objectives are:
a. [blank_start]Quantifiable[blank_end]
b. [blank_start]Indicators of progress[blank_end]
c. [blank_start]Establish operating environment[blank_end]
d. [blank_start]Define the performance characteristics[blank_end] of the design- AQuantifiable
- BIndicators of progress
- CEstablish operating environment
- DDefine the performance characteristics
23What are the advantages of early concept generation:
a. [blank_start]Reduces cost problems[blank_end]
b. [blank_start]Very affordable[blank_end]
c. [blank_start]Gives team confidence[blank_end]- AReduces cost problems
- BVery affordable
- CGives team confidence
24List 5 steps in concept generation:
1. [blank_start]Clarify the problem[blank_end]
2. [blank_start]Search externally[blank_end]
3. [blank_start]Search internally[blank_end]
4. [blank_start]Explore systematically[blank_end]
5. [blank_start]Reflect[blank_end]- AClarify the problem
- BSearch externally
- CSearch internally
- DExplore systematically
- EReflect
25List 4 methods of the selection process:
1. [blank_start]External decision[blank_end]
2. [blank_start]Product champion[blank_end]
3. [blank_start]Voting[blank_end]
4. [blank_start]Pros and cons list[blank_end]- AExternal decision
- BProduct champion
- CVoting
- DPros and cons list
26Concept screening is [blank_start]unweighted[blank_end] and concept scoring is [blank_start]weighted[blank_end].
- Aunweighted
- Bweighted
27List 6 steps of concept selection:
1. [blank_start]Prepare selection matrix[blank_end]
2. [blank_start]Rate concepts[blank_end]
3. [blank_start]Rank concepts[blank_end]
4. [blank_start]Combine and improve concepts[blank_end]
5. [blank_start]Choose one or more concepts[blank_end]
6. [blank_start]Reflect[blank_end]- APrepare selection matrix
- BRate concepts
- CRank concepts
- DCombine and improve concepts
- EChoose one or more concepts
- FReflect
28Usually time and [blank_start]cost[blank_end] play the largest role in the selection process of concept generation. [blank_start]Ideal[blank_end] value is the best result we could hope for when setting target specifications. When setting target values for product specifications, one way to express the value of a metric is at least X, which established the [blank_start]minimum[blank_end] bound of the acceptable values.
- Acost
- BIdeal
- Cminimum
29Functional analysis diagram:
[blank_start]I[blank_end][blank_start]n[blank_end][blank_start]p[blank_end][blank_start]u[blank_end][blank_start]t[blank_end][blank_start]s[blank_end] > [blank_start]S[blank_end][blank_start]y[blank_end][blank_start]s[blank_end][blank_start]te[blank_end][blank_start]m[blank_end] > [blank_start]O[blank_end][blank_start]ut[blank_end][blank_start]puts[blank_end]- AI
- Bn
- Cp
- Du
- Et
- Fs
- GS
- Hy
- Is
- Jte
- Km
- LO
- Mut
- Nputs
Informações
- Descrição
- Quiz sobre Edesign, criado por Jacob Allen em 07-10-2019.
- Autor
- Jacob Allen
- Idioma
- English
- Visualizações
- 35
- Avaliação
- Ainda sem avaliações Avalie este quiz