Quiz
CCNAv7
Crie uma conta grátis para terminar este quiz
Salve seu progresso e veja sua nota final.
Já tem uma conta? Inicie sessão
Perguntas do quiz (115)
1What OSI physical layer term describes the process by which one wave modifies another wave?
- Amodulation
- BIEEE
- CEIA/TIA
- Dair
2What OSI physical layer term describes the capacity at which a medium can carry data?
- Abandwidth
- BIEEE
- CEIA/TIA
- Dair
3What OSI physical layer term describes the measure of the transfer of bits across a medium over a given period of time?
- Athroughput
- Bbandwidth
- Clatency
- Dgoodput
4What OSI physical layer term describes the amount of time, including delays, for data to travel from one point to another?
- Alatency
- Bbandwidth
- Cthroughput
- Dgoodput
5What OSI physical layer term describes the measure of usable data transferred over a given period of time?
- Agoodput
- Bfiber-optic cable
- Cair
- Dcopper cable
6What OSI physical layer term describes the physical medium which uses electrical pulses?
- Acopper cable
- Bfiber-optic cable
- Cair
- Dgoodput
7What OSI physical layer term describes the physical medium for microwave transmissions?
- Aair
- Bgoodput
- Clatency
- Dthroughput
8Which two functions are performed at the MAC sublayer of the OSI data link layer? (Choose two.)
- AImplements a trailer to detect transmission errors.
- BControls the NIC responsible for sending and receiving data on the physical medium.
- CPlaces information in the frame that identifies which network layer protocol is being used for the frame.
- DAdds Layer 2 control information to network protocol data.
- EEnables IPv4 and IPv6 to utilize the same network interface and media.
9Which two functions are performed at the LLC sublayer of the OSI data link layer? (Choose two.)
- AEnables IPv4 and IPv6 to utilize the same network interface and media.
- BPlaces information in the frame that identifies which network layer protocol is being used for the frame.
- CIntegrates various physical technologies.
- DImplements a process to delimit fields within a Layer 2 frame.
- EControls the NIC responsible for sending and receiving data on the physical medium.
10Which two functions are performed at the MAC sublayer of the OSI data link layer? (Choose two.)
- AProvides a mechanism to allow multiple devices to communicate over a shared medium.
- BControls the NIC responsible for sending and receiving data on the physical medium.
- CPlaces information in the frame that identifies which network layer protocol is being used for the frame.
- DAdds Layer 2 control information to network protocol data.
- ECommunicates between the networking software at the upper layers and the device hardware at the lower layers.
11Which two functions are performed at the MAC sublayer of the OSI data link layer? (Choose two.)
- AControls the NIC responsible for sending and receiving data on the physical medium.
- BIntegrates various physical technologies.
- CCommunicates between the networking software at the upper layers and the device hardware at the lower layers.
- DAdds Layer 2 control information to network protocol data.
- EPlaces information in the frame that identifies which network layer protocol is being used for the frame.
12Which two functions are performed at the LLC sublayer of the OSI data link layer? (Choose two.)
- AAdds Layer 2 control information to network protocol data.
- BPlaces information in the frame that identifies which network layer protocol is being used for the frame.
- CPerforms data encapsulation.
- DControls the NIC responsible for sending and receiving data on the physical medium.
- EIntegrates various physical technologies.
13Which two functions are performed at the MAC sublayer of the OSI data link layer? (Choose two.)
- AProvides synchronization between source and target nodes.
- BIntegrates various physical technologies.
- CCommunicates between the networking software at the upper layers and the device hardware at the lower layers.
- DAdds Layer 2 control information to network protocol data.
- EEnables IPv4 and IPv6 to utilize the same network interface and media.
14Which two functions are performed at the LLC sublayer of the OSI data link layer? (Choose two.)
- AAdds Layer 2 control information to network protocol data.
- BEnables IPv4 and IPv6 to utilize the same network interface and media.
- CProvides data link layer addressing.
- DImplements a trailer to detect transmission errors.
- EProvides synchronization between source and target nodes.
15Which two functions are performed at the MAC sublayer of the OSI data link layer? (Choose two.)
- AImplements a trailer to detect transmission errors.
- BProvides synchronization between source and target nodes.
- CPlaces information in the frame that identifies which network layer protocol is being used for the frame.
- DEnables IPv4 and IPv6 to utilize the same network interface and media.
- EAdds Layer 2 control information to network protocol data.
16Which two functions are performed at the LLC sublayer of the OSI data link layer? (Choose two.)
- AEnables IPv4 and IPv6 to utilize the same network interface and media.
- BAdds Layer 2 control information to network protocol data.
- CIntegrates various physical technologies.
- DImplements a trailer to detect transmission errors.
- EProvides synchronization between source and target nodes.
17Which two functions are performed at the MAC sublayer of the OSI data link layer? (Choose two.)
- AProvides a mechanism to allow multiple devices to communicate over a shared medium.
- BControls the NIC responsible for sending and receiving data on the physical medium.
- CPlaces information in the frame that identifies which network layer protocol is being used for the frame.
- DAdds Layer 2 control information to network protocol data.
- EEnables IPv4 and IPv6 to utilize the same network interface and media.
18What are three characteristics of an SVI? (Choose three.)
- AIt is designed as a security protocol to protect switch ports.
- BIt is not associated with any physical interface on a switch.
- CIt is a special interface that allows connectivity by different types of media.
- DIt is required to allow connectivity by any device at any location.
- EIt provides a means to remotely manage a switch.
- FIt is associated with VLAN1 by default.
19Which statement accurately describes a TCP/IP encapsulation process when a PC is sending data to the network?
- AData is sent from the internet layer to the network access layer.
- BPackets are sent from the network access layer to the transport layer.
- CSegments are sent from the transport layer to the internet layer.
- DFrames are sent from the network access layer to the internet layer.
20Which two OSI model layers have the same functionality as a single layer of the TCP/IP model? (Choose two.)
- Adata link
- Bnetwork
- Cphysical
- Dsession
- Etransport
21At which OSI layer is a source IP address added to a PDU during the encapsulation process?
- Anetwork layer
- Bdata link layer
- Ctransport layer
- Dapplication layer
22At which OSI layer is a destination port number added to a PDU during the encapsulation process?
- Atransport layer
- Bdata link layer
- Cnetwork layer
- Dapplication layer
23At which OSI layer is data added to a PDU during the encapsulation process?
- Aapplication layer
- Bdata link layer
- Cnetwork layer
- Dtransport layer
24At which OSI layer is a source IP address added to a PDU during the encapsulation process?
- Anetwork layer
- Bapplication layer
- Cpresentation layer
- Ddata link layer
25At which OSI layer is data added to a PDU during the encapsulation process?
- Aapplication layer
- Btransport layer
- Cnetwork layer
- Dpresentation layer
26At which OSI layer is a destination IP address added to a PDU during the encapsulation process?
- Anetwork layer
- Bapplication layer
- Ctransport layer
- Dpresentation layer
27At which OSI layer is a source MAC address added to a PDU during the encapsulation process?
- Adata link layer
- Bapplication layer
- Ctransport layer
- Dpresentation layer
28At which OSI layer is a source port number added to a PDU during the encapsulation process?
- Atransport layer
- Bapplication layer
- Cnetwork layer
- Dpresentation layer
29At which OSI layer is a destination MAC address added to a PDU during the encapsulation process?
- Adata link layer
- Btransport layer
- Capplication layer
- Dnetwork layer
30What is the purpose of the OSI physical layer?
- Acontrolling access to media
- Btransmitting bits across the local media
- Cperforming error detection on received frames
- Dexchanging frames between nodes over physical network media
31What is the function of the CRC value that is found in the FCS field of a frame?
- Ato verify the integrity of the received frame
- Bto verify the physical address in the frame
- Cto verify the logical address in the frame
- Dto compute the checksum header for the data field in the frame
32Which statement describes a characteristic of the frame header fields of the data link layer?
- AThey all include the flow control and logical connection fields.
- BEthernet frame header fields contain Layer 3 source and destination addresses.
- CThey vary depending on protocols.
- DThey include information on user applications.
33Which three basic parts are common to all frame types supported by the data link layer? (Choose three.)
- Aheader
- Btype field
- CMTU size
- Ddata
- Etrailer
- FCRC value
34Which two statements describe features or functions of the logical link control sublayer in Ethernet standards? (Choose two.)
- ALogical link control is implemented in software.
- BLogical link control is specified in the IEEE 802.3 standard.
- CThe LLC sublayer adds a header and a trailer to the data.
- DThe data link layer uses LLC to communicate with the upper layers of the protocol suite.
- EThe LLC sublayer is responsible for the placement and retrieval of frames on and off the media.
35Which term describes a field in the IPv4 packet header that contains an 8-bit binary value used to determine the priority of each packet?
- Adifferentiated services
- Bdestination IPv4 address
- Csource IPv4 address
- Dprotocol
36Which term describes a field in the IPv4 packet header used to detect corruption in the IPv4 header?
- Aheader checksum
- Bsource IPv4 address
- Cprotocol
- DTTL
37Which term describes a field in the IPv4 packet header that contains a 32-bit binary value associated with an interface on the sending device?
- Asource IPv4 address
- Bdestination IPv4 address
- Cprotocol
- DTTL
38Which term describes a field in the IPv4 packet header that contains a unicast, multicast, or broadcast address?
- Adestination IPv4 address
- Bprotocol
- CTTL
- Dheader checksum
39Which term describes a field in the IPv4 packet header used to limit the lifetime of a packet?
- ATTL
- Bsource IPv4 address
- Cprotocol
- Dheader checksum
40Which term describes a field in the IPv4 packet header that contains a 4-bit binary value set to 0100?
- Aversion
- Bsource IPv4 address
- Cprotocol
- DTTL
41What property of ARP causes cached IP-to-MAC mappings to remain in memory longer?
- AEntries in an ARP table are time-stamped and are purged after the timeout expires.
- BA static IP-to-MAC address entry can be entered manually into an ARP table.
- CThe type field 0x806 appears in the header of the Ethernet frame.
- DThe port-to-MAC address table on a switch has the same entries as the ARP table on the switch.
42What property of ARP allows MAC addresses of frequently used servers to be fixed in the ARP table?
- AA static IP-to-MAC address entry can be entered manually into an ARP table.
- BEntries in an ARP table are time-stamped and are purged after the timeout expires
- CThe type field 0x806 appears in the header of the Ethernet frame.
- DThe port-to-MAC address table on a switch has the same entries as the ARP table on the switch.
43What property of ARP allows hosts on a LAN to send traffic to remote networks?
- ALocal hosts learn the MAC address of the default gateway.
- BThe destination MAC address FF-FF-FF-FF-FF-FF appears in the header of the Ethernet frame.
- CThe source MAC address appears in the header of the Ethernet frame.
- DThe port-to-MAC address table on a switch has the same entries as the ARP table on the switch.
44What property of ARP forces all Ethernet NICs to process an ARP request?
- AThe destination MAC address FF-FF-FF-FF-FF-FF appears in the header of the Ethernet frame.
- BThe source MAC address appears in the header of the Ethernet frame.
- CThe type field 0x806 appears in the header of the Ethernet frame.
- DARP replies are broadcast on the network when a host receives an ARP request.
45What property of ARP causes a reply only to the source sending an ARP request?
- AThe source MAC address appears in the header of the Ethernet frame.
- BThe destination MAC address FF-FF-FF-FF-FF-FF appears in the header of the Ethernet frame.
- CThe type field 0x806 appears in the header of the Ethernet frame.
- DARP replies are broadcast on the network when a host receives an ARP request.
46What property of ARP causes the request to be flooded out all ports of a switch except for the port receiving the ARP request?
- AThe destination MAC address FF-FF-FF-FF-FF-FF appears in the header of the Ethernet frame.
- BThe type field 0x806 appears in the header of the Ethernet frame.
- CEntries in an ARP table are time-stamped and are purged after the timeout expires.
- DARP replies are broadcast on the network when a host receives an ARP request.
47What property of ARP causes the NICs receiving an ARP request to pass the data portion of the Ethernet frame to the ARP process?
- AThe type field 0x806 appears in the header of the Ethernet frame.
- BThe destination MAC address FF-FF-FF-FF-FF-FF appears in the header of the Ethernet frame.
- CEntries in an ARP table are time-stamped and are purged after the timeout expires.
- DARP replies are broadcast on the network when a host receives an ARP request.
48A user issues a ping 2001:db8:FACE:39::10 command and receives a response that includes a code of 2 . What does this code represent?
- Abeyond scope of the source address
- Bcommunication with the destination administratively prohibited
- Caddress unreachable
- Dno route to destination
49A user issues a ping 192.135.250.103 command and receives a response that includes a code of 1. What does this code represent?
- Ahost unreachable
- Bbeyond scope of the source address
- Caddress unreachable
- Dcommunication with the destination administratively prohibited
50A user issues a ping fe80:65ab:dcc1::100 command and receives a response that includes a code of 3. What does this code represent?
- Aaddress unreachable
- Bcommunication with the destination administratively prohibited
- Cbeyond scope of the source address
- Dno route to destination
51A user issues a ping 10.10.14.67 command and receives a response that includes a code of 0. What does this code represent?
- Anetwork unreachable
- Bprotocol unreachable
- Cport unreachable
- Dhost unreachable
52A user issues a ping fe80:65ab:dcc1::100 command and receives a response that includes a code of 4. What does this code represent?
- Aport unreachable
- Bhost unreachable
- Cprotocol unreachable
- Dnetwork unreachable
53What are two types of IPv6 unicast addresses? (Choose two.)
- Amulticast
- Bloopback
- Clink-local
- Danycast
- Ebroadcast
54Which IPv6 prefix is reserved for communication between devices on the same link?
- AFC00::/7
- B2001::/32
- CFE80::/10
- DFDFF::/7
55Which interface allows remote management of a Layer 2 switch
- Athe AUX interface
- Bthe console port interface
- Cthe switch virtual interface
- Dthe first Ethernet port interface
56While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The changes did not solve the problem and were not saved. What action can the technician take to discard the changes and work with the file in NVRAM?
- AIssue the reload command without saving the running configuration.
- BDelete the vlan.dat file and reboot the device.
- CClose and reopen the terminal emulation software.
- DIssue the copy startup-config running-config command.
57Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.)
- AVTY interface
- Bconsole interface
- Cethernet interface
- Dboot IOS mode
- Eprivileged EXEC mode
- Frouter configuration mode
58What two criteria are used to help select a network medium from various network media? (Choose two.)
- Athe types of data that need to be prioritized
- Bthe cost of the end devices utilized in the network
- Cthe distance the selected medium can successfully carry a signal
- Dthe number of intermediate devices installed in the network
- Ethe environment where the selected medium is to be installed
59Which two statements describe the services provided by the data link layer?
- AIt defines the end-to-end delivery addressing scheme.
- BIt maintains the path between the source and destination devices during the data transmission.
- CIt manages the access of frames to the network media.
- DIt provides reliable delivery through link establishment and flow control.
- EIt ensures that application data will be transmitted according to the prioritization.
- FIt packages various Layer 3 PDUs into a frame format that is compatible with the network interface.
60What is a characteristic of the LLC sublayer?
- AIt provides the logical addressing required that identifies the device.
- BIt provides delimitation of data according to the physical signaling requirements of the medium.
- CIt places information in the frame allowing multiple Layer 3 protocols to use the same network interface and media.
- DIt defines software processes that provide services to the physical layer.
61What type of communication rule would best describe CSMA/CD?
- Aaccess method
- Bflow control
- Cmessage encapsulation
- Dmessage encoding
62What is the purpose of the FCS field in a frame?
- Ato obtain the MAC address of the sending node
- Bto verify the logical address of the sending node
- Cto compute the CRC header for the data field
- Dto determine if errors occurred in the transmission and reception
63What are two actions performed by a Cisco switch? (Choose two.)
- Abuilding a routing table that is based on the first IP address in the frame header
- Busing the source MAC addresses of frames to build and maintain a MAC address table
- Cforwarding frames with unknown destination IP addresses to the default gateway
- Dutilizing the MAC address table to forward frames via the destination MAC address
- Eexamining the destination MAC address to add new entries to the MAC address table
64What is one advantage of using the cut-through switching method instead of the store-and-forward switching method?
- Ahas a positive impact on bandwidth by dropping most of the invalid frames
- Bmakes a fast forwarding decision based on the source MAC address of the frame
- Chas a lower latency appropriate for high-performance computing applications
- Dprovides the flexibility to support any mix of Ethernet speeds
65Which is a multicast MAC address?
- AFF-FF-FF-FF-FF-FF
- B01-00-5E-00-00-03
- C5C-26-0A-4B-19-3E
- D00-26-0F-4B-00-3E
66What does the term “attenuation” mean in data communication?
- Aloss of signal strength as distance increases
- Btime for a signal to reach its destination
- Cleakage of signals from one cable pair to another
- Dstrengthening of a signal by a networking device
67What are two services provided by the OSI network layer? (Choose two.)
- Aperforming error detection
- Brouting packets toward the destination
- Cencapsulating PDUs from the transport layer
- Dplacement of frames on the media
- Ecollision detection
68How do hosts ensure that their packets are directed to the correct network destination?
- AThey have to keep their own local routing table that contains a route to the loopback interface, a local network route, and a remote default route.
- BThey always direct their packets to the default gateway, which will be responsible for the packet delivery.
- CThey search in their own local routing table for a route to the network destination address and pass this information to the default gateway.
- DThey send a query packet to the default gateway asking for the best route.
69When transporting data from real-time applications, such as streaming audio and video, which field in the IPv6 header can be used to inform the routers and switches to maintain the same path for the packets in the same conversation?
- ANext Header
- BFlow Label
- CTraffic Class
- DDifferentiated Services
70What statement describes the function of the Address Resolution Protocol?
- AARP is used to discover the IP address of any host on a different network.
- BARP is used to discover the IP address of any host on the local network.
- CARP is used to discover the MAC address of any host on a different network.
- DARP is used to discover the MAC address of any host on the local network.
71login
- AR1(config)#
- BR1>
- CR1(config-router)#
- DR1#
- ER1(config-line)#
- FR1(config-if)#
72service password-encryption
- AR1(config)#
- BR1>
- CR1(config-router)#
- DR1#
- ER1(config-line)#
- FR1(config-if)#
73ip address 192.168.4.4 255.255.255.0
- AR1(config)#
- BR1>
- CR1(config-router)#
- DR1#
- ER1(config-line)#
- FR1(config-if)#
74copy running-config startup-config
- AR1(config)#
- BR1>
- CR1(config-router)#
- DR1#
- ER1(config-line)#
- FR1(config-if)#
75Which three commands are used to set up secure access to a router through a connection to the console interface? (Choose three.)
- Ainterface fastethernet 0/0
- Bline vty 0 4
- Cline console 0
- Denable secret cisco
- Elogin
- Fpassword cisco
76What are two roles of the transport layer in data communication on a network? (Choose two.)
- Aidentifying the proper application for each communication stream
- Btracking the individual communication between applications on the source and destination hosts
- Cproviding frame delimiting to identify bits making up a frame
- Dperforming a cyclic redundancy check on the frame for errors
- Eproviding the interface between applications and the underlying network over which messages are transmitted
77What important information is added to the TCP/IP transport layer header to ensure communication and connectivity with a remote network device?
- Atiming and synchronization
- Bdestination and source port numbers
- Cdestination and source physical addresses
- Ddestination and source logical network addresses
78What are three responsibilities of the transport layer? (Choose three.)
- Ameeting the reliability requirements of applications, if any
- Bmultiplexing multiple communication streams from many users or applications on the same network
- Cidentifying the applications and services on the client and server that should handle transmitted data
- Ddirecting packets towards the destination network
- Eformatting data into a compatible form for receipt by the destination devices
- Fconducting error detection of the contents in frames
79Which three protocols operate at the application layer of the TCP/IP model? (Choose three.)
- AFTP
- BPOP3
- CDHCP
- DARP
- ETCP
- FUDP
80Which three layers of the OSI model provide similar network services to those provided by the application layer of the TCP/IP model? (Choose three.)
- Aphysical layer
- Bsession layer
- Ctransport layer
- Dapplication layer
- Epresentation layer
- Fdata link layer
81Which action is performed by a client when establishing communication with a server via the use of UDP at the transport layer?
- AThe client sets the window size for the session.
- BThe client sends an ISN to the server to start the 3-way handshake.
- CThe client randomly selects a source port number.
- DThe client sends a synchronization segment to begin the session.
82Which three application layer protocols use TCP?
- ASMTP
- BFTP
- CSNMP
- DHTTP
- ETFTP
- FDHCP
83What type of attack may involve the use of tools such as nslookup and fping?
- Aaccess attack
- Breconnaissance attack
- Cdenial of service attack
- Dworm attack
84A network technician is troubleshooting an issue and needs to verify the IP addresses of all interfaces on a router. What is the best command to use to accomplish the task?
- Ashow ip interface brief
- Bnslookup
- Cipconfig getifaddr en0
- Dshow ip route
85Students who are connected to the same switch are having slower than normal response times. The administrator suspects a duplex setting issue. What is the best command to use to accomplish the task?
- Ashow interfaces
- Bipconfig getifaddr en0
- Ccopy running-config startup-config
- Dshow ip nat translations
86A user wants to know the IP address of the PC. What is the best command to use to accomplish the task?
- Aipconfig
- Bcopy running-config startup-config
- Cshow interfaces
- Dshow ip nat translations
87A student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task?
- Acopy running-config startup-config
- Bshow interfaces
- Cshow ip nat translations
- Dshow ip route
88A support technician needs to know the IP address of the wireless interface on a MAC. What is the best command to use to accomplish the task?
- Aipconfig getifaddr en0
- Bcopy running-config startup-config
- Cshow interfaces
- Dshow ip nat translations
89A network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the task?
- Ashow ipv6 interface
- Bshow interfaces
- Cshow ip nat translations
- Dshow ip route
90A teacher is having difficulties connecting his PC to the classroom network. He needs to verify that a default gateway is configured correctly. What is the best command to use to accomplish the task?
- Aipconfig
- Bcopy running-config startup-config
- Cshow interfaces
- Dshow ip nat translations
91Only employees connected to IPv6 interfaces are having difficulty connecting to remote networks. The analyst wants to verify that IPv6 routing has been enabled. What is the best command to use to accomplish the task?
- Ashow running-config
- Bshow interfaces
- Ccopy running-config startup-config
- Dshow ip nat translations
92An administrator is troubleshooting connectivity issues and needs to determine the IP address of a website. What is the best command to use to accomplish the task?
- Anslookup
- Bshow ipv6 route
- Cshow ipv6 interface
- Dcopy startup-config running-config
93Only employees connected to IPv6 interfaces are having difficulty connecting to remote networks. The analyst wants to verify that IPv6 routing has been enabled. What is the best command to use to accomplish the task?
- Ashow running-config
- Bshow ipv6 route
- Cshow ipv6 interface
- Dcopy startup-config running-config
94What is the purpose of the network security accounting function?
- Ato require users to prove who they are
- Bto determine which resources a user can access
- Cto keep track of the actions of a user
- Dto provide challenge and response questions
95What type of attack may involve the use of tools such as nslookup and fping?
- Aaccess attack
- Breconnaissance attack
- Cdenial of service attack
- Dworm attack
96At which layer of the OSI model would a logical address be added during encapsulation?
- Aphysical layer
- Bdata link layer
- Cnetwork layer
- Dtransport layer
97A network administrator is measuring the transfer of bits across the company backbone for a mission critical financial application. The administrator notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.)
- Athe amount of traffic that is currently crossing the network
- Bthe sophistication of the encapsulation method applied to the data
- Cthe type of traffic that is crossing the network
- Dthe latency that is created by the number of network devices that the data is crossing
- Ethe bandwidth of the WAN connection to the Internet
98What are three ways that media access control is used in networking? (Choose three.)
- AEthernet utilizes CSMA/CD.
- BMedia access control provides placement of data frames onto the media.
- CContention-based access is also known as deterministic.
- D802.11 utilizes CSMA/CD.
- EData link layer protocols define the rules for access to different media.
- FNetworks with controlled access have reduced performance due to data collisions.
99What action will occur if a switch receives a frame and does have the source MAC address in the MAC table?
- AThe switch refreshes the timer on that entry.
- BThe switch shares the MAC address table entry with any connected switches.
- CThe switch does not forward the frame.
- DThe switch sends the frame to a connected router because the destination MAC address is not local.
100What action will occur if a switch receives a frame with the destination MAC address FF:FF:FF:FF:FF:FF?
- AThe switch forwards it out all ports except the ingress port.
- BThe switch shares the MAC address table entry with any connected switches.
- CThe switch does not forward the frame.
- DThe switch sends the frame to a connected router because the destination MAC address is not local.
101What action will occur if a host receives a frame with a destination MAC address it does not recognize?
- AThe host will discard the frame.
- BThe host sends the frame to the switch to update the MAC address table.
- CThe host forwards the frame to the router.
- DThe host forwards the frame to all other hosts.
102What action will occur if a switch receives a frame with the destination MAC address 01:00:5E:00:00:D9?
- AThe switch forwards it out all ports except the ingress port.
- BThe switch does not forward the frame.
- CThe switch sends the frame to a connected router because the destination MAC address is not local.
- DThe switch shares the MAC address table entry with any connected switches.
103What action will occur if a host receives a frame with a destination MAC address of FF:FF:FF:FF:FF:FF?
- AThe host will process the frame.
- BThe host forwards the frame to the router.
- CThe host sends the frame to the switch to update the MAC address table.
- DThe host forwards the frame to all other hosts.
104Within a production network, what is the purpose of configuring a switch with a default gateway address?
- AHosts that are connected to the switch can use the switch default gateway address to forward packets to a remote destination.
- BA switch must have a default gateway to be accessible by Telnet and SSH.
- CThe default gateway address is used to forward packets originating from the switch to remote networks.
- DIt provides a next-hop address for all traffic that flows through the switch.
105Which destination address is used in an ARP request frame?
- A0.0.0.0
- B255.255.255.255
- CFFFF.FFFF.FFFF
- DAAAA.AAAA.AAAA
- Ethe physical address of the destination host
106Where are IPv4 address to Layer 2 Ethernet address mappings maintained on a host computer?
- Aneighbor table
- BARP cache
- Crouting table
- DMAC address table
107Which three application layer protocols use TCP? (Choose three.)
- ASMTP
- BFTP
- CSNMP
- DHTTP
- ETFTP
- FDHCP
108What layer is responsible for routing messages through an internetwork in the TCP/IP model?
- Ainternet
- Btransport
- Cnetwork access
- Dsession
109Which statement is correct about network protocols?
- ANetwork protocols define the type of hardware that is used and how it is mounted in racks.
- BThey define how messages are exchanged between the source and the destination.
- CThey all function in the network access layer of TCP/IP.
- DThey are only required for exchange of messages between devices on remote networks.
110What three items are contained in an Ethernet header and trailer? (Choose three.)
- Asource IP address
- Bsource MAC address
- Cdestination IP address
- Ddestination MAC address
- Eerror-checking information
111The global configuration command ip default-gateway 172.16.100.1 is applied to a switch. What is the effect of this command?
- AThe switch will have a management interface with the address 172.16.100.1.
- BThe switch can be remotely managed from a host on another network.
- CThe switch can communicate with other hosts on the 172.16.100.0 network.
- DThe switch is limited to sending and receiving frames to and from the gateway 172.16.100.1.
112What are two potential network problems that can result from ARP operation? (Choose two.)
- AManually configuring static ARP associations could facilitate ARP poisoning or MAC address spoofing.
- BOn large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays.
- CNetwork attackers could manipulate MAC address and IP address mappings in ARP messages with the intent of intercepting network traffic.
- DLarge numbers of ARP request broadcasts could cause the host MAC address table to overflow and prevent the host from communicating on the network.
- EMultiple ARP replies result in the switch MAC address table containing entries that match the MAC addresses of hosts that are connected to the relevant switch port.
113Which two protocols may devices use in the application process that sends email? (Choose two.)
- AHTTP
- BSMTP
- CPOP
- DIMAP
- EDNS
- FPOP3
114Which protocol or service uses UDP for a client-to-server communication and TCP for server-to-server communication?
- AHTTP
- BFTP
- CDNS
- DSMTP
115What kind of port must be requested from IANA in order to be used with a specific application?
- Aregistered port
- Bprivate port
- Cdynamic port
- Dsource port
Informações
- Descrição
- Quiz sobre CCNAv7, criado por Sander Valkema em 12-02-2020.
- Autor
- Sander Valkema
- Idioma
- English
- Visualizações
- 1
- Avaliação
- Ainda sem avaliações Avalie este quiz