O GoConqr está de visual novo! Conte para nós o que você achou.

Quiz

Quix7 - D4 - 50Q

Requiemdust Sheena 50 perguntas 5,0 (1 avaliação)

Fazer o quiz

Perguntas do quiz (50)

  1. 1What important factor differentiates Frame Relay from X.25?
    1. AA. Frame Relay supports multiple PVCs over a single WAN carrier
      connection.
    2. BB. Frame Relay is a cell-switching technology instead of a packetswitching
      technology like X.25.
    3. CC. Frame Relay does not provide a committed information rate (CIR).
    4. DD. Frame Relay only requires a DTE on the provider side.
  2. 2During a security assessment of a wireless network, Jim discovers that
    LEAP is in use on a network using WPA. What recommendation
    should Jim make?
    1. AA. Continue to use LEAP. It provides better security than TKIP for
      WPA networks.
    2. BB. Use an alternate protocol like PEAP or EAP-TLS and implement
      WPA2 if supported.
    3. CC. Continue to use LEAP to avoid authentication issues, but move to
      WPA2.
    4. DD. Use an alternate protocol like PEAP or EAP-TLS, and implement
      Wired Equivalent Privacy to avoid wireless security issues.
  3. 3Ben has connected his laptop to his tablet PC using an 802.11g
    connection. What wireless network mode has he used to connect these
    devices?
    1. AA. Infrastructure mode
    2. BB. Wired extension mode
    3. CC. Ad hoc mode
    4. DD. Stand-alone mode
  4. 4Lauren’s and Nick’s PCs simultaneously send traffic by transmitting at
    the same time. What network term describes the range of systems on a
    network that could be affected by this same issue?
    1. AA. The subnet
    2. BB. The supernet
    3. CC. A collision domain
    4. DD. A broadcast domain
  5. 5Sarah is manually reviewing a packet capture of TCP traffic and finds
    that a system is setting the RST flag in the TCP packets it sends
    repeatedly during a short period of time. What does this flag mean in
    the TCP packet header?
    1. AA. RST flags mean “Rest.” The server needs traffic to briefly pause.
    2. BB. RST flags mean “Relay-set.” The packets will be forwarded to the
      address set in the packet.
    3. CC. RST flags mean “Resume Standard.” Communications will resume
      in their normal format.
    4. DD. RST means “Reset.” The TCP session will be disconnected.
  6. 6Gary is deploying a wireless network and wants to deploy the fastest
    possible wireless technology. Due to technical constraints, he is
    limited to using a 2.4 GHz option. Which one of the following wireless
    networking standards should he use?
    1. AA. 802.11a
    2. BB. 802.11g
    3. CC. 802.11n
    4. DD. 802.11ac
  7. 7Chris is configuring an IDS to monitor for unencrypted FTP traffic.
    What ports should Chris use in his configuration?
    1. AA. TCP 20 and 21
    2. BB. TCP 21 only
    3. CC. UDP port 69
    4. DD. TCP port 21 and UDP port 21
  8. 8Which OSI layer includes electrical specifications, protocols, and
    interface standards?
    1. AA. The Transport layer
    2. BB. The Device layer
    3. CC. The Physical layer
    4. DD. The Data Link layer
  9. 9FHSS, DSSS, and OFDM all use what wireless communication method
    that occurs over multiple frequencies simultaneously?
    1. AA. WiFi
    2. BB. Spread Spectrum
    3. CC. Multiplexing
    4. DD. Orthogonal modulation
  10. 10Brian is selecting an authentication protocol for a PPP connection. He
    would like to select an option that encrypts both usernames and
    passwords and protects against replay using a challenge/response
    dialog. He would also like to reauthenticate remote systems
    periodically. Which protocol should he use?
    1. AA. PAP
    2. BB. CHAP
    3. CC. EAP
    4. DD. LEAP

Informações

Descrição
Good Luck!
Idioma
English
Visualizações
90
Avaliação
5,0 de 5 · 1 avaliação
Avalie este quiz
Avalie este quiz

Fale Conosco

Sobre o que é sua mensagem?

O que você acha do novo visual?

Você gostou?