Quiz
Statistical Sampling
Crie uma conta grátis para terminar este quiz
Salve seu progresso e veja sua nota final.
Já tem uma conta? Inicie sessão
Perguntas do quiz (16)
1Which of the following must be known to evaluate the results of an attribute sample?
- AActual size of the sample selected.
- BEstimated dollar value of the population.
- CFinite population correction factor.
- DStandard deviation of the sample values.
2The size of a given sample is jointly a result of characteristics of the population of interest and decisions made by the internal auditor. Everything else being equal, sample size will
- ADecrease if the internal auditor increases the tolerable rate of deviation.
- BIncrease if the internal auditor decides to accept more risk of incorrectly concluding that controls are effective when they are in fact ineffective.
- CDouble if the internal auditor finds that the variance of the population is twice as large as was indicated in the pilot sample.
- DIncrease as sampling risk increases.
3In an attribute sampling application, holding other factors constant, sample size will increase as which of the following becomes smaller?
- AExpected rate of occurrence.
- BPopulation.
- CPlanned precision.
- DConfidence coefficient.
4For which of the following audit tests would an internal auditor most likely use attribute sampling?
- AExamining invoices in support of the measurement of fixed asset additions.
- BSelecting accounts receivable for confirmation of account balances.
- CMaking an independent estimate of the amount of a LIFO inventory.
- DInspecting employee time cards for proper approval by supervisors.
5An auditor has to make a number of decisions when using attribute sampling. The term efficiency is used to describe anything that affects sample size. The term effectiveness is used to describe the likelihood that the statistical sample result will be a more accurate estimate of the true population error rate. Assume an auditor expects a control procedure failure rate of 0.5%. The auditor is making a decision on whether to use a 90% or a 95% confidence level and whether to set the tolerable control failure rate at 3% or 4%. Which of the following statements regarding efficiency and effectiveness of an attribute sample is true?
- AIncreasing the confidence level to 95% will increase audit efficiency.
- BIncreasing the confidence level to 95% and decreasing the tolerable control failure rate to 3% will increase audit effectiveness.
- CDecreasing the confidence level to 90% and decreasing the tolerable control failure rate to 3% will result in both increased efficiency and effectiveness.
- DDecreasing the tolerable failure rate from 4% to 3% will increase audit efficiency.
6In selecting a sample of items for attributes testing, an auditor must consider the confidence level factor, the desired precision, and the
- ASampling interval.
- BRecorded monetary amount of the population.
- CExpected occurrence rate.
- DStandard deviation in the population.
7If all other sample size planning factors were exactly the same in attribute sampling, changing the confidence level from 95% to 90% and changing the desired precision from 2% to 5% would result in a revised sample size that would be
- AIndeterminate.
- BSmaller.
- CLarger.
- DUnchanged.
8An auditor planning an attribute sample from a large number of invoices intends to estimate the actual rate of deviations. Which factor below is the most important for the auditor to consider?
- APopulation variance.
- BDesired confidence level.
- CPopulation size.
- DAudit objective.
9An auditor applying a discovery-sampling plan with a 5% risk of overreliance may conclude that there is
- AA 95% probability that the actual rate of occurrence in the population is less than the critical rate if the occurrence rate in the sample is less than the critical rate.
- BA 95% probability that the actual rate of occurrence in the population is less than the critical rate if only one exception is found.
- CA 95% probability that the actual rate of occurrence in the population is less than the critical rate if no exceptions are found.
- DGreater than a 95% probability that the actual rate of occurrence in the population is less than the critical rate if no exceptions are found.
10When planning an attribute sampling application, the difference between the expected error rate and the maximum tolerable error rate is the planned
- ASkewness.
- BPrecision.
- CReliability.
- DDispersion.
11Statistical sampling may be used to test the effectiveness of controls. An internal auditor’s procedures should result in a statistical conclusion about
- AThe population value not being misstated by more than a fixed amount.
- BMonetary precision exceeding a certain predetermined amount.
- CThe relation of the population deviation rate to the tolerable rate.
- DPopulation characteristics occurring at least once in the population.
12A random attribute sample taken from a large population should be representative. However, a random sample may not detect fraud. For this reason, the size of a random sample is most dependent on which of the following factors?
- AThe size of the population.
- BThe comprehensive basis of accounting used to prepare the organization’s financial statements.
- CThe level of risk that the organization has accepted.
- DThe size of the internal audit function.
13An internal auditor is planning to use attribute sampling to test the effectiveness of a specific internal control related to approvals for cash disbursements. In attribute sampling, decreasing the estimated occurrence rate from 5% to 4% while keeping all other sample size planning factors exactly the same would result in a revised sample size that would be
- AIndeterminate.
- BUnchanged.
- CSmaller.
- DLarger.
14Fact Pattern:
An individual is an internal auditor for a car rental agency that operates a fleet of 75,000 vehicles in 1,000 cities throughout North America. As a part of an operational audit, the auditor tested the impact of vehicle age on the incidence of major repairs. A computer program showed that 20% of the fleet has been in service for more than 12 months. A sample of 375 is drawn based on
----Confidence level = 95%
----Expected rate of occurrence = 10%
----Precision = ±3%
The records related to repairs completed after 12 months of service for the selected vehicles were reviewed to determine if major repairs were needed.
Assuming that all other factors remain constant, how would sample size and achieved precision be affected by a change in confidence level from 95% to 90%?- ASample size would be smaller; achieved precision would be larger.
- BSample size would be larger; achieved precision would be smaller.
- CBoth sample size and achieved precision would be larger.
- DBoth sample size and achieved precision would be smaller.
15If all other factors specified in an attribute sampling plan remain constant, decreasing the confidence level from 95% to 90% would cause the required sample size to
- AChange by 5%.
- BRemain the same.
- CIncrease.
- DDecrease.
16In testing payroll transactions, an internal auditor discovers that 4 out of a statistical sample of 100 selected time cards were not signed by the appropriate supervisor. To evaluate the materiality or significance of this control deficiency, the auditor should
- AReport the deviations and let management assess the significance because they are in the best position to know.
- BCompute an upper precision limit and compare with the tolerable deviation rate.
- CEvaluate the dollar amount of the four time cards in relation to the financial statements.
- DCompare the tolerable deviation rate with the expected deviation rate.
Informações
- Descrição
- Quiz sobre Statistical Sampling, criado por Orfa Cartagena em 17-05-2023.
- Autor
- Orfa Cartagena
- Idioma
- English
- Visualizações
- 3
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz