Surface-Mount Technology (Mod. 3 Sect. 2 Part 6)

Questão	Responda
In the ________ method, all components are soldered to one side of the board. (no leads are sticking through the other side)	surface-mount
The abbreviation for Printed Circuit Board is ____.	PCB
The abbreviation for Surface-Mount Technology is ____.	SMT
Don't touch an SMT component if it's a chip! A chip is a component that has no ________.	protective coating
The resistance of an SMT resistor is a _____ code printed on the surface.	3-number
On some SMT resistors, one side is black and one is white. They must always be soldered with the _____ side down.	black
Unlike SMT resistors, SMT capacitors use a _____ code.	letter
Since they are polarized, remember to never mount an SMT capacitor _____.	backwards
A _______ is a type of choke that suppresses high-frequency electronic noise in electronic circuits.	ferrite bead

Resumo de Recurso

	Criado por That Yeti Dog Person mais de 5 anos atrás