Mapa mental
3D printing. Materials used.
Conteúdo do mapa
3D printing. Materials used.
ABS(acrylonitrile butadiene styrene)
- It is a very tough, hard ,rigid, resistant and flexible plastic.
- It has a very high melting point and must be heated to 230-260ºC for use in additive manufacturing.
- When we print wit ABS, the resulting parts must obtain the required stability on a heat bed.
- This plastic is easy to machine and has good finishes but it should only be used in ventilated environments because it releases harmful gases at printing.
- It is not biodegradable but it is recyclable.
PLA (polylactic acid)
- PLA is created from natural materials such as corn starch or sugar cane.
- It is biodegradable and does not release toxic gases when it is used in printing.
- It is odourless, resistant to humidity and stable under ultraviolet radiation.
- It can be used for quick printing and does not need a heated bed. It is used at temperatures of 190-200 ºC.
- If arts printed with PLA are set at 50-60ºC they start to break down.
Laybrick
- It is a a filament for 3D printing made from a mixture of plaster and plastic materials.
- We can use this filament to create parts with sandstone-like appareance.
- It is easy to sand and paint.
Laywoo-D3
- A filament for 3D printing made from a polymer and 40% wood particles.
- It can be used to obtain parts with a wood-like finish.
- It can be sawn, sanded and painted.
Thermoplastic materials (additive manufacturing) are used in 3D printing because they are easy to mould and form. The most widely used plastics are ABS (for industrial use) And PLA (for domestic use)
Informações
- Descrição
- Mapa Mental sobre 3D printing. Materials used., criado por Frida Carlman em 02-04-2020.
- Criado por
- Frida Carlman
- Visualizações
- 2
- Avaliação
Mais sobre 3D Printing and Additive Manufacturing