Notas
Mechanics 2 - M2
Conteúdo das notas (5)
Página 1
Chapter 1 - Kinematics of a Particle Moving in a Straight Line or Plane
Projectiles in the Vertical Plane
We can use the acceleration formulae, SUVAT.
A particle projected at speed 'u', at an angle 'a' to the horizontal will move along a symmetric curve.
The initial speed 'u' is called the speed of projection.
The angle 'a' is called the angle of projection.
The initial velocity of the projectile can be resolved into two components:
u cosa - the horizontal component,
u sina - the vertical component.
Vertical Motion:
Has constant acceleration g.
Use the SUVAT equations.
Horizontal Motion:
Motion with constant speed.
Use the formula:
Distance = speed x time:
Distance is called the range, from where the particle was projected.
Time is referred to as the 'time of flight'.
Greatest Height:
A particle is at its greatest height when its velocity is 0, the highest point on the symmetric curve.
Using Calculus for a Particle Moving in a Straight Line
Used when the acceleration of a particle varies.
You can use integration and differentiation to switch between acceleration, velocity and displacement.
REMEMBER THE CONSTANT OF INTEGRATION.
Using Calculus, with Vectors, for a Particle Moving in a Straight Line
As above, you can use differentiation and integration to switch between the position vector, velocity and acceleration in terms of vectors.
Página 2
Chapter 2 - Centres of Mass
Finding the Centre of Mass of Particles in a Straight Line
In the X plane:
The sum of the masses, each multiplied by the distance of the particle from the origin in the X plane, is equal to the sum of all the masses multiplied by the distance of the COM from the origin.
In the Y plane:
The sum of the masses, each multiplied by the distance of the particle from the origin in the Y plane, is equal to the sum of all the masses multiplied by the distance of the COM from the origin.
Finding the Centre of Mass of Particles in a Plane
Combine the two methods above:
Find the distance from the Y axis horizontally to find the X coordinate of the COM.
Find the distance from the X axis vertically to find the Y coordinate of the COM.
Finding the Centre of Mass of a Uniform Lamina
Most questions will not define an origin, so you will have to choose your own.
A lamina is an object which has one dimension much smaller than the other, such as a sheet of paper.:
This means that it is regarded as being two-dimensional, but with area instead of volume.
A uniform lamina means its mass is evenly spread throughout its area.
If a uniform lamina has a line of symmetry, the COM will lie on that axis.
If a uniform lamina has multiple lines of symmetry, the COM is the point of intersection of those lines.
Shapes:
Uniform Circular Disc:
Its COM is located at its centre.
Uniform Rectangular Lamina:
Find the midpoint of the short and long sides, thus finding X and Y values.
The lines of symmetry intersect at this point, so the COM is found there.
Uniform Triangular Lamina:
Find all of the coordinates of each point on the triangle.
To find the X coordinate of the COM:
Sum all the X values of the triangle points and divide by 3.
To find the Y coordinate of the COM:
Sum all the Y values of the triangle points and divide by 3.
Uniform Sector of a Circle:
The equation is given in the formular booklet.
NOTE: The angle is from the axis of symmetry to the base of the circle, so half the angle at the centre.
Finding the Centre of Mass of a Composite Lamina
When two or more shapes are put together, this forms a composite lamina.
To find this:
Find the area of each shape, by separating out into the shapes defined above.
Find the COM of each separate shape.
Use the previous methods the X and Y planes to find the COM of the composite lamina.
Finding the Centre of Mass of a Framework
A framework consists of a number of rods joined together, or a number of pieces of wire joined together.
Uniform Circular Arc:
The equation is given in the formula booklet.
Uniform Rectangular Framework:
The COM of each rod is found at the midpoint of the rod.
Use the same technique as before to find the COM of the whole system.
Problems Involving a Lamina in Equilibrium
When a lamina is suspended freely from a fixed point or about a horizontal axis, it will rest in equilibrium with its centre of mass vertically below the pivot.
The resultant of the moments about the pivot is always 0.
Lamina on an Inclined Plane:
The weight of the lamina must pass through the side of the lamina AB which is in contact with the plane.
This produces a clockwise moment about A:
If the angle of the plane is increased so that the line of action of the weight passed outside the side AB, then the weight produces an anticlockwise moment and topples over.
Página 3
Chapter 3 - Work, Energy and Power
Calculating Work Done
The work done against friction is defined as:
Work done = force x distance.
Where the force is the friction applied.
The work done against gravity is defined as:
Work done = mgh.
m is the mass of the particle.
g is the acceleration due to gravity.
h is the vertical distance raised:
This will often be the vertical component of the height.
Calculating Kinetic Energy and Gravitational Potential
As a particle moves upwards, it gains potential energy and loses kinetic energy.
As a particle moves downwards, it gains kinetic energy and loses potential energy.
The kinetic energy of a particle is defined as:
Kinetic energy = 0.5mv².
m is the mass of the particle.
v is the velocity the particle is travelling with.
The gravitational potential energy of a particle is defined as:
Potential energy = mgh.
m is the mass of the particle.
g is the acceleration due to gravity.
h is the height of the particle above a fixed level.
Calculating Work Done:
Work done against friction can also be calculated by:
Work done = final kinetic energy - inital kinetic energy.
Work done = increase in kinetic energy.
Using the Principle of Conservation of Mechanical Energy and the Work-Energy Principle
When no external forces other than gravity do work on a particle during its motion, the sum of the particle's kinetic and potential energies remain constant.
Calculating Work Done:
Work done against friction = change in the total energy of the particle.
Fs = loss in energy - gain in energy.
Calculating Power
Power is the rate at which work is done.
Measured in watts (W), 1 watt is 1 joule of energy per second.
Power is defined as:
Power = Fv.
F is the driving force being produced.
v is the speed of the vehicle.
Página 4
Chapter 4 - Collisions
Impulse-Momentum Principle
The impulse of a force is equal to the change in momentum produced.
This also works when values are provided in vector form.
Principle of Conservation of Linear Momentum
The momentum before is always equal to momentum after a collision.
This also works when values are provided in vector form.
Collisions and Newton's Law of Restitution
The law defines how the speeds of the particles after the collision depend on the nature of the particles as well as the speeds before the collision.
The law only holds when collision takes place in free space or on a smooth surface.
The coefficient of restitution, e, is defined as:
e = speed of separation of the particles/speed of approach of particles.
If e = 1, the particle is perfectly elastic.
If e = 0, the particle is called inelastic.
0 <= e <= 1:
e can't be bigger than 1, or smaller than 0.
You will be expected to be able to apply inequalities to find ranges of the value of e.
The law of restitution and the principles covering momentum can be combined to solve problems, often involving two unknown velocities.
Collisions are structured the same as seen in M1.
Collisions With a Plane Perpendicular to the Direction of Motion
This simplifies the coefficient of restitution to:
e = v/u.
v is the speed of the rebound.
u is the speed of approach.
Successive Collisions
When solving problems involving successive impacts, you can solve each collision separately.
In a collision involving particles A, B and C, when A collides with B, the final velocity of B will then be the initial velocity when working with the collision between B and C.
Change in Energy Due to an Impact or Impulse
Use the conservation of momentum and the coefficient of restitution to find two unknown velocities.
The loss of kinetic energy due to impact is defined as:
Loss of kinetic energy = sum of kinetic energies of both particles before impact - sum of kinetic energies of both particles after
Página 5
Chapter 5 - Statics of Rigid Bodies
Moments of a Force Acting on a Body
The moment of a force is defined as:
Moment = magnitude of the force x perpendicular distance of the line of action of the force from P.
P is a point you're taking moments from.
The moments in M2 are a lot more complex, you will often have to split a force into components, or find the perpendicular distance directly, to find the moment of it acting on a particular point.
Rigid Bodies in Equilibrium
There is 0 resultant force in any direction.
The sum of the moment about any point is 0:
The moment does not need to be on the body.
It is also important to remember that there will always be a vertical reaction, as well as some form of friction, when a point touches a surface, as shown below.
Limiting Equilibrium
If a body is on the point of moving, then it is in limiting equilibrium.
Then, the frictional force takes its maximum value μR.
Informações
- Descrição
- A Level Edexcel Maths Notas sobre Mechanics 2 - M2, criado por Michael Mee em 12-06-2018.
- Criado por
- Michael Mee
- Visualizações
- 12
- Avaliação