Notas
Power electronics
Conteúdo das notas (25)
Página 1
Página 2
Applications
Less than 100W: Small motor drives used in home appliances (washing machine, vacuum cleaners, hand dryers, induction cooking, hood fan) ,Switched-mode power supplies for portable equipment
Less than 10kW: • Power supplies for Laptop/PC, Variable-speed motor drives used in commercial buildings
10kW up to 1MW: • High power motor drive • Traction control • Renewable energy system
More than 1MW: • Utility transmission lines • Grid connected system • Reactive Power Control
Photo Voltaic Systems: Using solar panels, an unregulated dc voltage must be boosted and then converted to AC voltage with standard grid amplitude and frequency

Página 3
Wind turbine generator: Wind turbines generate voltage with variable frequency and amplitude due to variable power and speed of wind. A power converter is needed to convert the variable AC voltage to the adjustable one suitable for grid.

Página 4


Página 5

Página 6

Página 7

Loss generated by current
Heat increased
Efficiency decreased
Página 8
AC to DC conversion

Página 9
Power Electronics System Modules

Página 10
Input: (AC or DC) voltage or current source and a load, e.g. resistive load.
Cascade Conversion: multiple converters connected in cascade.
Power semiconductor devices: power switches to chop input voltage or current waveform to control the flow of energy.
Control system: open-loop or close-loop system implemented mainly in digital electronics (in some cases we use analog circuits)
Gate drivers: Gating circuit to provide the gate drive signals to support switching devices if the control signals would not be strong enough for switching
Circuit breakers: One or more static switches acting as a circuit breaker to run off the whole system if there is any short circuit.
Sensors: Current, voltage and thermals sensors for overvoltage, overcurrent and over temperature scenarios.
Filters: Input and output filters for immunity and emission control.
High Power and Low Power:
Power diode
Power Metal-oxide Field-Effect Transistor (Power MOSFET)
Insulated-Gate Bipolar Transistor (IGBT)
High Power:
• Silicon-Controlled Rectifier (SCR) or Thyristor
• Power Bipolar Junction Transistor (BJT)
Página 11
Thyristor:
Application in high voltage converters due to its characteristic of withstanding high voltage and delivering high current
Used in simple and cheap AC-AC converters
Gate Turn-off Thyristor (GTO) for high power applications.
MOS-Controlled Thyristor (MCT) for high power applications.

Página 12
Application of Power Converters

Página 13
Power Factor Correction

Página 14


Página 15
P is not time dependent.
When θv = θi , it is a purely resistive load case.
When θv– θi = ±90o, it is a purely reactive load case.
P = 0 means that the circuit absorbs no average power.


Página 16





Página 17
Power diodes








Página 18
Thyristor





Página 19
Single-phase half-wave rectifiers





Página 20
Single-phase full-wave rectifier







Página 21





Página 22





Página 23








Página 24




Página 25







Informações
- Descrição
- Notas sobre Power electronics, criado por Rezi Tsulukidze em 07-05-2018.
- Criado por
- Rezi Tsulukidze · mai 2018
- Atualizado
- 9 mai 2018
- Visualizações
- 26
- Avaliação