O GoConqr está de visual novo! Conte para nós o que você achou.

Quiz

Security 100 - 150

Anthony Rosales Sandoval 50 perguntas

Fazer o quiz

Este quiz tem tempo limite, por isso abre no player de sempre.

Perguntas do quiz (50)

  1. 1Which of the following commands should you issue to allow a packet to exit an ASA through the same interface through which it entered the ASA? (Select the best answer.)
    1. Asamesecuritytraffic permit interinterface
    2. Bsamesecuritytraffic permit intrainterface
    3. Csecuritylevel 0
    4. Dsecuritylevel 100
    5. EEstabished
  2. 2Which of the following devices requires that a physical interface be in promiscuous mode in order to monitor network traffic? (Select the best answer.)
    1. Aan IPS
    2. Ba firewall
    3. Ca router
    4. Dan IDS
    5. Ean ASA
  3. 3Which of the following is typically implemented in a cluster configuration? (Select the best answer.)
    1. AACS
    2. BCSA
    3. CCTA
    4. DSSC
  4. 4Which of the following traffic types are blocked by default in a zone-based policy firewall configuration? (Select 2 choices.)
    1. Atraffic to or from the self zone
    2. Btraffic between interfaces in the same zone
    3. Ctraffic between interfaces in a zone and interfaces not assigned to any zone
    4. Dtraffic between interfaces in different zones
    5. Etraffic directly to or received from the router
  5. 5An inside host has initiated a TCP connection through a Cisco ASA to an outside server. The outside server has responded with a SYN/ACK segment? however, the inside host has not yet responded with an ACK segment.
    Which of the following lines of output from the show conn command best represents the state of the connection in this scenario? (Select the best answer.)
    1. ATCP outside 192.0.2.51:22 inside 10.1.1.18:12113 idle 0:00:00, bytes 0, flags SaAB
    2. BTCP outside 192.0.2.51:22 inside 10.1.1.18:12113 idle 0:00:00, bytes 0, flags saA
    3. CTCP outside 192.0.2.51:22 inside 10.1.1.18:12113 idle 0:00:00, bytes 0, flags aB
    4. DTCP outside 192.0.2.51:22 inside 10.1.1.18:12113 idle 0:00:00, bytes 0, flags A
    5. ETCP outside 192.0.2.51:22 inside 10.1.1.18:12113 idle 0:00:00, bytes 0, flags U
    6. FTCP outside 192.0.2.51:22 inside 10.1.1.18:12113 idle 0:00:00, bytes 0, flags UIO
  6. 6Which of the following is an IOS privilege level that provides the highest level of access on a Cisco router? (Select the best answer.)
    1. A0
    2. B1
    3. C15
    4. D16
  7. 7Which of the following statements is true regarding LDAP attribute maps on an ASA? (Select the best answer.)
    1. AThere is a defined limit on the number of LDAP attribute maps you can configure.
    2. BThere is a defined limit on the number of attributes that can be mapped in each LDAP attribute map.
    3. CThere is a defined limit on the number of LDAP servers to which an LDAP attribute map can be applied.
    4. DThere is a defined limit on the number of AD multivalued attributes matched by an LDAP attribute map.
  8. 8Which of the following can be determined from the Route Details tab of the VPN Client Statistics dialog box shown above? (Select the best answer.)
    Imagem da pergunta 8
    1. AThe VPN client cannot access devices on the local LAN.
    2. BThe VPN client is configured to use split tunneling.
    3. CThe VPN client is configured to use transparent tunneling.
    4. DThe VPN client cannot access devices on the 172.16.20.0/24 network.
  9. 9Which of the following IPS detection methods is a string pattern-based detection method? (Select the best answer.)
    1. Aanomalybased detection
    2. Bprofilebased detection
    3. Csignaturebased detection
    4. Dpolicybased detection
  10. 10You have been asked to add a key to an existing keychain. You issue the following commands to enter key chain key configuration mode:
    RouterA(config)#key chain chain1
    RouterA(configkeychain)#key 2
    RouterA(configkeychainkey)#keystring key2
    The new key should be valid for three hours, and the router should begin sending the key at 9 a.m. on January 13, 2015.
    Which of the following commands should you issue next to achieve your goal? (Select the best answer.)
    1. Aaccep-tlifetime 09:00:00 Jan 13 2015 duration 3
    2. Baccep-tlifetime 09:00:00 Jan 13 2015 duration 180
    3. Csend-lifetime 09:00:00 Jan 13 2015 duration 1800
    4. Dsend-lifetime 09:00:00 Jan 13 2015 duration 10800

Informações

Descrição
CCNA Security Quiz sobre Security 100 - 150, criado por Anthony Rosales Sandoval em 03-11-2018.
Idioma
Español
Visualizações
11
Etiquetas
ccna security
Avaliação
Ainda sem avaliações
Avalie este quiz
Avalie este quiz

Mais sobre Firewalls and Access Control Lists

Fale Conosco

Sobre o que é sua mensagem?

O que você acha do novo visual?

Você gostou?