Quiz
Dynamics AX product and BOM configuration questions
Crie uma conta grátis para terminar este quiz
Salve seu progresso e veja sua nota final.
Já tem uma conta? Inicie sessão
Perguntas do quiz (91)
1You create a new product and a new bill of materials (BOM) for the product. The product is available in three different configurations.
Which statement about these configurations is true?- AA. The product configurator will create three separate configuration models
- BB. The product has different item numbers for each configuration.
- CC. All three configurations must have the same item number, but each configuration must
have a unique configuration number. - DD. Each configuration must have a unique item number and the item type must be set to
BOM for each new product.
2You send a sales quotation to a customer named Contoso, Ltd. You have another customer named Litware, Inc. Litware has a trade agreement in place, which includes two of the items in the sales quotation that was sent to Contoso. You plan to copy the sales quotation to create a sales quotation for Litware. You need to ensure that the sales quotation for Litware adheres to the trade agreement you have with Litware. Which option should you select in the copy quotation function?
- AA. Copy precisely
- BB. Recalculate price
- CC. Copy charges
- DD. Delete quotation lines
3A customer reports a defective product. You need to find the vendors and the other customers who are affected by the defective product. Which three details are required before you can perform a trace?
- AA. The storage dimensions
- BB. The tracking dimensions
- CC. The item number
- DD. The trace direction
- EE. The transaction dates
4You plan to set up a commission structure in Dynamics AX.
You need to configure the groups for commission calculations.
Which three types of groups should you configure? Each correct answer presents part of
the solution.- AA. Item groups
- BB. Commission customer groups
- CC. Sales groups
- DD. Item discount groups
- EE. Campaign groups
5You need to establish picking routes.
Which two types of information do you need? Each correct answer presents part of the
solution.- AA. The height of the locations
- BB. The proximity of the outbound dock
- CC. The direction in which to travel through the warehouse
- DD. The number of aisles
6Which two statements describe a requirements explosion from a sales order line?
- AA. The explosion creates a sales order line for each component of a bill of materials
(BOM). - BB. The explosion shows how requirements can be satisfied for the sales order line
- CC. The explosion is a partial update of the dynamic master plan
- DD. The explosion is used for the availability check.
- AA. The explosion creates a sales order line for each component of a bill of materials
7You create a new product that has a new bill of materials (BOM). The lines for each
component are added to the BOM lines.
You need to configure the BOM to prevent the line for item 700 and the line for item 500
from both being selected in the BOM.
What should you create?- AA. Aconfiguration route for item 700 by using the Select method for 500
- BB. Aconfiguration rule for item 700 by using The Select method for 500
- CC. Aconfiguration route for item 700 by using the Deselect method for 500
- DD. Aconfiguration rule for item 700 by using the Deselect method for 500
8You plan to start using product change cases.
You need to identify what must be configured before you can create a new product change
case.
What should you identify?- AA. Case processes
- BB. Knowledge articles
- CC. Case workflows
- DD. Case categories
9You have several bills of materials (BOMs) that include an item manufactured by a third
party.
The third party plans to discontinue the production of the item.
You need to locate all of the BOMs that include the item.
Which report should you use?- AA. Order lines
- BB. Where-used
- CC. Calculation
- DD. On-hand inventory
10You create a new sales order for an item that has a bill of materials (BOM) and a
configuration.
You select a new configuration for the item.
You need the sales price on the sales order to reflect the options selected in the
configuration of the BOM.
What should you do?- AA. Perform a components explosion on the line.
- BB. Select the correct sub-BOM on the line
- CC. Perform a requirement explosion on the line.
- DD. Perform a BOM calculation on the line.
11You need to create a purchase agreement between your company and a supplier. The
agreement will give you a 10 percent discount automatically on an item, after you purchase
$10,000 US dollars' worth of that Item during a 12 month period.
Which Default commitment type should you use?- AA. Product quantity commitment
- BB. Value commitment
- CC. Product value commitment
- DD. Product category value commitment
12You need to identify what information is available in the Composed of - tree form from a
sales order line. What should you identify?- AA. The sales price of each order line for the bill of materials (BOM) Items on the sales order
lineB.The sales price of each bill of materials (BOM) component for the item on the sales
order line - BB. The details of the bill of materials (BOM) components for the item on the sales order line
O0- E. The details of the configuration route and operations for the item on the sales order
line
- AA. The sales price of each order line for the bill of materials (BOM) Items on the sales order
13You plan to create a purchase order for items that are not currently in stock.
You need to ensure that when a customer places an order for the items, the quantity of the
items in the purchase order can be reserved for the customer.
What should you do before you create the purchase order?- AA. Select Reserve ordered items in the Inventory and warehouse management parameters
form. - BB. Select an Allocation key in the Accounts payable parameters form.
- CC. Select Reserve items automatically in the Inventory and warehouse management
parameters form. - DD. Select Automatic in the Reservation field of the Accounts receivable parameters form
- AA. Select Reserve ordered items in the Inventory and warehouse management parameters
14You have a customer return order that has a status of Open. The return order has three
lines. The status of one of the lines is set to Received and the status of the other two lines
is set to Expected.
You change the status of all three lines to Received.
You need to identify the current status of the customer return order.
What should you identify?- AA. Canceled
- BB. Created
- CC. Invoiced
15You need to calculate the delivery date for a transfer order automatically based on the
distance between warehouses.
What should you configure?- AA. Lead times
- BB. Transport times
- CC. Delivery schedules
- DD. Warehouse calendars
16You need to ensure that when a certain item is received, the item is quarantined
automatically.
What should you configure?- AA. Astorage dimension group
- BB. An item model group
- CC. Atracking dimension group
- DD. An item group
17You plan to run an automatic update on the ABC classifications of all items.
You need to identify which ABC code to update based on the sales of each item in a given
period,
Which ABC code should you identify?- AA. Value
- BB. Revenue
- CC. Margin
- DD. Carrying cost
18You need to set up a trade agreement for a group of customers. The trade agreement will
apply to one item.
How should you configure the price discount journal for Account code and Item code?- AA. Set Account code to Table and set Item code to Group.
- BB. Set Account code to Group and set Item code to Table
- CC. Set Account code to Group and set Item code to All
- DD. Set Account code to Table and set Item code to Table
19You send a sales quotation to a customer.
The customer requests several changes to the original quotation, which results in a total of
five different quotations being sent to the customer. Each quotation includes modifications
to the original quantity and the original price.
The customer accepts the third quotation that was sent
You need to review the details of the third quotation.
What should you open?- AA. The Quotation journal
- BB. The Sales quotation list page
- CC. The Alternative quotations
- DD. The Quotation confirmation journal
20Which three configuration technologies are supported on the product master definition?
- AA. Dimension-based configuration
- BB. Product attributes
- CC. Constraint-based configuration
- DD. Predefined variant
- EE. Product variant
21A sale was made, and on one of the lines of the sales order, another sales group must be
given credit for the sale and any commission that is generated for that line.
You need to generate the commission on the relevant sales line to the other sales group.
What should you use?- AA. The sales journal
- BB. The tine details section of the sales order
- CC. The Commission calculation form
- DD. The Commission posting form
22You need to set up locations for a warehouse that will store finished goods for one of your
company's divisions.
What are three possible details that you can specify for the locations? Each correct answer
presents a complete solution.- AA. The maximum number of pallets
- BB. The physical dimensions
- CC. The inventory dimensions
- DD. The maximum dimensions of the items
- EE. The maximum weight that can be stored
23You need to identify the minimum number of warehouses that must exist before you can
create a transfer order?
How many should you identify?- AA. 1
- BB. 2
- CC. 3
24You need to derive the sales price of an item while calculating a bill of materials (BOM).
Which settings should you configure?- AA. Profit setting
- BB. Calculation group
- CC. Item purchase price
- DD. Cost group
25You are setting up a new product.
Which of the following three fields are required to finalize the released product? Each
correct answer presents pan of the solution.- AA. Product category
- BB. Item group
- CC. Item sales tax group
- DD. StorageDimension group
- EE. Item modelgroup
26You need to identify what can be done from the Arrival overview form.
What should you identify?- AA. Estimating and managing item arrival alerts
- BB. Viewing expected receipts and starting the receipt process
- CC. Registering items that are delivered to a transfer warehouse
27You need to ensure that a customer receives a discount when the customer orders more
than 10 items from the same item discount group.
In the Journal lines, price/discount agreement form, what should you select in the Relation
column?- AA. Price (Sales)
- BB. Totaldisc. (Sales)
- CC. Line disc. (Sales)
- DD. Multiline disc, (sales)
28You need to identify which type of information you can obtain by performing bill of materials
(BOM) calculations?
Which three types of information should you identify?- AA. The projected sales prices andcosts of BOM Items manufactured in different quantities
- BB. The quantity of raw materials required to manufacture the BOM item
- CC. The projected sales quantity of the BOM item
- DD. The profit margins and contribution ratios
- EE. The maximum production run size for the BOM
29You are explaining to a customer the differences in functionality between the BOM
designer form and the BOM form.
Which of the fallowingactions can be performedonly by usingthe ROMdesigner form?- AA. Print the details of a bill of materials (BOM).
- BB. Create, edit, and delete bill of materials (BOM) lines for a BOM.
- CC. Drag and drop items into a bill of materials (BOM).
30Your company receives several customer calls concerning quality issues about a specific
item.
You need to run tests on the on-hand inventory of the item.
How should you initiate the tests?- AA. From the Quality orderform, create a new quality order.
- BB. From the functions on the affected sales order, create a new quarantine order.
- CC. From the Quarantine order form, create a new quarantine order.
31You need to track the serial number of the items your company produces. The serial
numbers must only be entered during the issue process.
What should you create?- AA. Atracking dimension group that has only the Active setting enabled
- BB. Atracking dimension group that has only the Active in sales process setting enabled
- CC. Atracking dimension group that has the Active setting enabled and the Blank receipt
allowed setting enabled
32You need to add freight and handling charges when you enter a new purchase order.
What are two possible ways to achieve this goal? Each correct answer presents a
complete solution.- AA. Create a journal for the freight and handling charges.
- BB. Add two additional lines to the purchase order, one for the freight service item and one
for the handling service items. - CC. Add two additional supplementary items to the purchase order, one for freight and one
for handling. - DD. Add two charges transactions that each has a charges code.
33You need to ensure that a shipment from a vendor can be accepted into inventory, even if
the quantity of the product received is greater than the amount ordered.
What should you configure?- AA. Me inventory and warehouse management parameters
- BB. The procurement and sourcing parameters
- CC. The product Information management parameters
- DD. The accounts payable parameters
34You need to identify during which status update the inventory of quarantined orders is
returned to its original location.
Which status update should you identify?- AA. Reported as finished
- BB. Ended
- CC. Released
- DD. Received
35A customer is placing an order for an item that is in stock. The customer requires that the
order be delivered within two weeks.
You need to identify the minimum amount of time required for the order to be delivered to
the customer.
What should you do from the Sales order form?- AA. View the Confirmed receipt date.
- BB. View the Confirmed delivery date.
- CC. Click Simulate delivery dates
- DD. From the purchase order, view the Requested receipt date
36You need to add freight and handling charges when you enter a new purchase order.
What are two possible ways to achieve this goal? Each correct answer presents a
complete solution.- AA. Add two additional lines to the purchase order, one for the freight service item and one
for the handling service items. - BB. Create a journal for the freight and handling charges.
- CC. Add two charges transactions that each has a charges code.
- DD. Add two additional supplementary items to the purchase order, one for freight and one
for handling.
- AA. Add two additional lines to the purchase order, one for the freight service item and one
37You plan to create a product template.
Which three settings will be copied when you create a new productthat is based on the
product template? Each correct answer presents part of the solution.- AA. Item price
- BB. Item group
- CC. Tracking dimension group
- DD. Item model group
- EE. Units of measure
38You add a new prospect.
You send the prospect a sales quotation that contains 100 items.
The prospect agrees to all of the terms in the sales quotation.
You need to create a sales order and complete the sale.
What should you do?- AA. Convert the prospect to a customer, and then confirm the sales quotation.
- BB. Cancel the sales quotation, and then enter a new sales order.
- CC. Confirm the sales quotation, and then enter a new sales order.
- DD. Confirm the sales quotation, convert the prospect to a customer, and then enter a new
sales order.
39You need to disable the Stocked setting for a product.
Which form should you use?- AA. Item group
- BB. Item model group
- CC. Storage dimension group
40You need to identify what happens to the on-hand inventor/ of a bill of materials (BOM) and
the components of the BOM when you report a BOM as finished.
What should you identify?- AA. The on-hand quantity of the BOM and the on-hand quantity of the BOM components ate
unchanged. - BB. The on-hand quantity of the BOM is increased, and the on-hand quantity of the BOM
components is decreased. - CC. The on-hand quantity of the BOM is unchanged and the on-hand quantity of the BOM
components is decreased. - DD. The on-hand quantity of the BOM item is increased, and the on-hand quantity of the
BOM components is unchanged.
- AA. The on-hand quantity of the BOM and the on-hand quantity of the BOM components ate
41You create a new item that has a tracking dimension group. The tracking dimension group
includes serial numbers as an active dimension.
You need to configure the item to use automatic allocation of the serial numbers.
What should you create?- AA. An item model group
- BB. Anumber group
- CC. Acost group
42You plan to report a bill of materials (BOM) as finished.
You need to ensure that when you report the BOM as finished, the following occurs:
Component items from the BOM are reported as finished.
Component items from the sub-BOMs that are currently on-hand are reported as
finished.
What should you set?- AA. The Reservation field to Automatic
- BB. The Explosion option to Always
- CC. The Explosion option to Shortage
- DD. The Reservation field to Explosion
43You plan to transfer inventory between multiple sites. Which two objects must be created before you can transfer the inventory?
- AA. An inbound location
- BB. An outbound location
- CC. Atransit warehouse
- DD. Adefault warehouse
44You create a new product change case for an item.
You need to add associations to the product change case.
Which types of associations can you add to the product change case?- AA. Only bills of materials (BOMs) and routes
- BB. All association types
- CC. Only bills of materials (BOMs) and formulas
- DD. Only formulas and items
45You need to register a pallet controlled item.
What are two possible ways to achieve this goal? Each correct answer presents a
complete solution.- AA. Complete a pallet transport.
- BB. Post an arrival journal.
- CC. Use the Direct registration function on the Arrival overview form.
- DD. Use the registration function on the order line.|
46A customer is placing an order for an item that is in stock. The customer requires that the
order be delivered within two weeks.
You need to identify the minimum amount of time required for the order to be delivered to
the customer.
What should you do from the Sales order form?- AA. View the Confirmed receipt date.
- BB. View the Confirmed delivery date.
- CC. From the purchase order, view the Requested receipt date.
- DD. Click Simulate delivery dates
47You have a bill of materials (BOM) item. All lines of the BOM item use a constant scrap
amount and a variable consumption. You identify that when you have a production run of
100 items, the scrap cost is 10 US dollars and the unit cost is one US dollar.
You need to identify what will be the cost in the BOM calculation when you increase the
size of production to 200 units.
Which cost should you identify?- AA. 2,100 US dollars
- BB. 210 US dollars
- CC. 220 US dollars
48You are configuring a new bill of materials (BOM) for a new product. The product is a set of speakers. You add all of the component items for the product to the BOM lines.
You need to set up the configuration route for the new product to meet the following
requirements:
• The power of the speakers must depend on the speaker enclosure.
• The speaker enclosure must depend on the wiring harness.
What should you do?- AA. Create a default configuration route, and then select the speaker enclosure item for the
speaker. - BB. Include the speaker enclosure and the wiring harness in a configuration rule.
- CC. Create a new BOM for the speaker enclosure, and then create a new BOM for the wiring
harness. - DD. Select an item from the wiring harness configuration group, and then from the speaker
enclosure.
- AA. Create a default configuration route, and then select the speaker enclosure item for the
49You plan to create a sales order for an item.
Currently, you do not have the item on hand, but you have a purchase order for the item.
You need to ensure that the item can be reserved against the purchase order.
What should you do?- AA. From the Accounts payable parameters form, set Reservation to Automatic.
- BB. From the Inventory and warehouse management parameters form, select Reserve items
automatically. - CC. From the Accounts receivable parameters form, set Reservation to Automatic.
- DD. From the Inventory and warehouse management parameters form, select Reserve
ordered items.
50You are creating a new item model group.
Which three of the following can you configure by using the Item model group form? Each
correct answer presents a complete solution.- AA. Whether quality testing is mandatory before accepting Items into Inventory
- BB. The ability to sell an item at a discount
- CC. The ability to accrue liability on a product receipt
- DD. Inventory that can have negative quantities on hand
- EE. How transactions will post to the ledger during a financial update
51You need to ensure that a sales order picking list is generated before a sales order packing
slip is generated.
Which form should you use to perform the configuration?- AA. Item model group
- BB. Item group
- CC. Sites
- DD. Inventory locations
52You need to configure which ledger account will be used when you post various types of
inventory transactions.
Which form should you use?- AA. Inventory and warehouse management parameters
- BB. Item model groups
- CC. General ledger parameters
- DD. Item groups
53You need to ensure that a quality order is generated automatically after you post a product
receipt for a purchase order.
What should you do?- AA. From the Inventory and warehouse management parameters form, select Use quality
management - BB. From the Item model groups form for the product, select Post physical inventory and
Receiving requirements - CC. From the Quality associations form, create a rule.
- AA. From the Inventory and warehouse management parameters form, select Use quality
54You create a new product change case for a bill of materials (BOM).
You need to identify which actions are available for the entity associated to the new case.
Which three actions should you identify? Each correct answer presents a complete
solution.- AA. Print
- BB. Activate
- CC. Expire
- DD. Approve
- EE. Calculate
55You need to identify during which processes you can register a serial number manually for
an item.
Which three processes should you identify? Each correct answer presents a complete
solution.- AA. While registering a product
- BB. While creating a sales order line
- CC. While creating a purchase order line
- DD. While releasing to the warehouse
- EE. While completing related quality orders
56When adding a component line to a bill of materials (BOM), you discover that the Resource
consumption check box is cleared and a warehouse is not specified.
Which warehouse will be usedor the component line?- AA. The picking warehouse from the item master data of the component product
- BB. The shipping warehouse from the item master data of the finished good
- CC. The shipping warehouse from the item master data of the component product
- DD. The picking warehouse from the item master data of the finished good
57You need to create a draft sales order. The sales order must not include inventory
transactions.
Which order type should you use?- AA. Subscription
- BB. Sales order
- CC. Item requirements
58You need to review the details of the cost and sales price for the following objects:
A bill of materials (BOM)
The BOM components
Which report should you use?- AA. Where-used
- BB. Older lines
- CC. On-hand inventory
59You need to ensure that picking lists and packing slips are created for all orders.
Which two parameters should you configure? Each correct answer presents pan of the
solution.- AA. Post picking list in ledger
- BB. Picking route status
- CC. Deduction requirements
- DD. Picking requirements
- EE. Post packing slip in ledger
60You need to create a new version of a bill of materials (BOM).
Which three options can be used to create a new version of the BOM?- AA. Warehouse
- BB. Dates
- CC. Line type
- DD. Quantities
- EE. Site
61You need to configure item reservations based on the last in, first out (LIFO) principle.
Which two parameters should you enable?- AA. Same batch selection
- BB. Backward from ship date
- CC. FIFO date-controlled
- DD. FEFO date-controlled
62You create a counting journal. The counted quantity on some lines of the journal is higher
or lower than the on-hand quantity.
You need to identify which field will be updated in the inventory transaction when you post
the counting journal.
Which field should you identify?- AA. Quantity
- BB. Counted
- CC. On-hand
63A customer returns a stocked item.
The item is currently at the inbound dock of the warehouse.
You need to process the return of the item.
What should you do first?- AA. From the Sales order form, generate a packing slip.
- BB. From the Arrival overview form, start an arrival.
- CC. From the Item arrival journal, generate a product receipt
64You plan to purchase 2,400 units of one item. Two hundred units of the item will be
received every month for 12 months.
You need to configure the purchase order for the item.
What should you do?- AA. Configure prepayments.
- BB. Set the Purchase type to Journal
- CC. Create a new delivery term.
- DD. Configure a delivery schedule
65You need to identify whether one of the items on a purchase order was received.
What should you do?- AA. On the All purchase orders list page, find the purchase order, and then verity the
Approval status. - BB. On the All purchase orders list page, find the purchase order, go to the line details, and
then verify the Line status. - CC. On the All purchase orders list page, find the purchase order, go to the line details, and
then verify the Finalized setting.
- AA. On the All purchase orders list page, find the purchase order, and then verity the
66You run the picking workbench process and receive several warning messages for items
that were not picked.
You need to identify what prevents the items from being picked.
Which two possible reasons should you identify? Each correct answer presents a complete
solution.- AA. There are no warehouse workers to complete the picking work.
- BB. The location of the items could not be ascertained
- CC. The sales order is marked as ship complete and one or more items on the sales order
are unavailable - DD. The items could not be reserved due to a lack of on-hand inventory.
67A user wants to use a custom filter (or the Arrival overview form.
You need to explain how to save the filter options to the user's computer.
What should you tell the user?- AA. Use the Personalization form to change the layout, and then load the Personalization
settings in the Arrival over - BB. Specify a setup name on the Setup tab of the Arrival overview form and save the current
settings. - CC. Specify a setup name on the Setup tab of the Inventory and warehouse management
parameters form and save the current settings.
- AA. Use the Personalization form to change the layout, and then load the Personalization
68You have a bill of materials (BOM) item that has several components.
You specify the measurements of a BOM component.
You need to identify when the measurements of a BOM component are calculated.
What are two possible events that will cause the measurements to be calculated?- AA. When a cost group is added to the costing sheet
- BB. When a cost estimation is run in the production order
- CC. When a calculation group is linked to the item of a BOM component
- DD. When a calculation is run on the BOM line
69You create a new purchase order and add a line that has a product, quantity, and unit
price.
You need to send the purchase order to the vendor.
What should you generate?- AA. Areceipts list
- BB. Aproduct receipt
- CC. Apro forma receipts list
- DD. Aconfirmation
70A warehouse coordinator manually allocates how much inventory should be shipped each
day for transfer orders. A warehouse worker uses the information entered by the
warehouse coordinator to process the shipments automatically.
You need to identify which actions must be performed by the warehouse coordinator and
the warehouse worker.
What should you identify?- AA. The warehouse coordinator enters the quantity into the Receive now field, and then the
warehouse worker performs the shipment update - BB. The warehouse coordinator enters the quantity into the Ship now field, and then the
warehouse worker performs the shipment update. - CC. The warehouse coordinator enters the quantity into the Ship now field, and then the
warehouse worker performs the picking list update.
- AA. The warehouse coordinator enters the quantity into the Receive now field, and then the
71Warehouse is specified as the primary stocking dimension in the storage dimension group
for an item.
You create a sales orders for the item and you specify a warehouse.
The sales order is configured for automatic reservation.
You need to identify which process Dynamics AX uses to reserve the item.
What should you identify?- AA. A reservation is made according to the first in, first out (FIFO) principle.
- BB. A reservation is made against the item only at the warehouse specified
- CC. A reservation is made against the dimension that has the lowest alphanumeric name.
72You need to ensure that when users perform bill of materials (BOM) calculations, they
receive a warning message if any manufactured components are missing an active BOM.
What should you configure?- AA. Acosting sheet
- BB. Calculation groups
- CC. Configuration groups
73You create a new product that has a bill of materials (BOM).
You add several lines to the BOM. Some of the lines are items. Some of the lines represent
a sub-assembly.
You set the line type for one of the sub-assembly lines to Vendor.
In this situation, what does the Vendor line type indicate?- AA. The sub-assembly contains several items supplied by one vendor.
- BB. The sub-assembly is produced from BOM components at your company.
- CC. The sub-assembly is produced by an external partner, but the inventory sub-assemblies
are delivered to your warehouse
74You need to configure Dynamics AX to support moving items from one site to another by
using journals.
Which module should you use?- AA. Product information management
- BB. Transportation management
- CC. Warehouse management
75You plan to create a new warehouse.
Which three of the following can be configured for a warehouse? Each correct answer presents part of the solution.- AA. Whether location names will include aisle, rack, and shelfan assignment to a specific
vendor - BB. The default time required to pick items from the warehouse
- CC. The sort sequence of the inventory location
- DD. Aunique order entry deadline
- AA. Whether location names will include aisle, rack, and shelfan assignment to a specific
76You receive a faulty item from a vendor.
You need to create a vendor return.
What should you create?- AA. Acopy of the purchase order
- BB. Afree textinvoice
- CC. Acredit note from a production order
77You post the shipment for a transfer order.
What is the current status of the inventory transaction relatedto the transfer order for the
from warehouse field?- AA. Received
- BC. Shipped
- CD. Delivered
78You have a customer who orders the same products frequently. You need to simplify the
creation of sales orders for the customer.
What should you use?- AA. Adirect delivery order
- BB. An item list
- CC. Anew item
79Your company adds a 20 percent markup to all items.
You need to ensure that users receive a warning message if an attempt to discount the
price of an item results in less than a 15 percent markup of the item.
What should you configure?- AA. Price details
- BB. Margin alerts
- CC. Price control
80You plan to create multiple bill of materials (BOM) versions.
What is the maximum number of BOM versions that can be approved for the same
product?- AA. One inactive version
- BB. An unlimited amount of active versions
- CC. One active version
81You have an item that uses a storage dimension group. Primary stocking is disabled for the
group. Item reservations for sales orders are automatic.
You create a new sales order for the item.
You need to select a specific batch number for the item.
What should you do?- AA. Disable automatic reservation on the sales order, and then change the batch number in
the Reservation form - BB. Disable automatic reservation on the sales order, and then lock the batch number in the
Reservation form. - CC. Use the Reservation form to select the batch number, and then place the order on hold.
- AA. Disable automatic reservation on the sales order, and then change the batch number in
82You need to create a new automatic charge. You open the Auto charges form and you create a new line.
Which field requires a value?- AA. Charges code
- BB. Item charge group
- CC. Charges value
83You need to configure commissions to be calculated on sales, only after all discounts are
taken on the line items of a sales order.- AA. The Sales order journal
- BB. The Price/discount agreement journal
- CC. The Commission percentage field
84You have a bill of materials (BOM) item.
Ten percent of one of the BOM components is wasted during the manufacturing process.
You need to ensure that the cost calculation for the BOM item is accurate.
What should you do?- AA. Set the Variable scrap field on the component BOM line to 10.
- BB. Set the Constant scrap field on the component BOM line to 10.
- CC. Set the Consumption is field on the component BOM line to variable
85You are setting up a new bill of materials (BOM) for a new product that your company is
designing.
The components for the new product already exist in Dynamics AX the finished good item
does not exist yet in Dynamics AX.
From the BOM form, where should you create the new BOM?- AA. The Common area of the Inventory and warehouse management module
- BB. The BOM line form for the released products
- CC. The Designer form for the released products
86You need to override the profit and loss account to which the physical inventory is posted in
the general ledger.
Which type of inventory journal should you use?- AA. Movement
- BB. Inventory adjustment
- CC. Transfer
87You need to report a bill of materials (BOM) as finished.
Which three settings should you specify before you report the BOM as finished? Each
correct answer presents part of the solution.- AA. Subcomponents
- BB. BOM number
- CC. Date
- DD. Quantity
- EE. Storage dimensions
88You have an item that is a component of several bills of materials (BOMs).
You need to change the item number of the item in all the BOMs that use the item.
Which process should you use?- AA. Recalculate BOM levels
- BB. Change BOM item
- CC. Change formula item
89You need to ensure that the picking workbench suggests which boxes to use to package
picked items.
Which two configurations should you perform? Each correct answer presents part of the
solution.- AA. From the Inventory and warehouse management parameters form, select Boxing logic
for picking workbench - BB. Link boxing definitions to each item before you run the picking workbench.
- CC. From the Released products form, select Apply boxing logic for picking work bench for
each item - DD. Create a new workbench profile and apply the profile when you run the picking
workbench.
- AA. From the Inventory and warehouse management parameters form, select Boxing logic
90Which three types of transactions can you configure on the Default order settings form?
Each correct answer presents part of the solution.- AA. Quality order
- BB. Purchase order
- CC. Sales order
- DD. Inventory
- EE. Quarantine order
91You need to set up a bill of materials (BOM) to meet the following requirements:
When fewer than 500 pieces of a BOM item are produced, the production cost
must be 6.78 US dollars for each item.
When 500 pieces or more of a BOM item are produced, the production cost must
be 6.52 US dollars for each item.
What should you do?- AA. Create one BOM version that has the per series field on each line set to 500. Create a
second BOM version that has the per series field on each line set to 1. - BB. Create one BOM version that has a from qty. of 0. Create asecond BOM version that
has afrom qty. of 500. - CC. Create one BOM version that has the Quantity field on each line set to 500. Create a
second BOM version that has the Quantity field on each line set to 1.
- AA. Create one BOM version that has the per series field on each line set to 500. Create a
Informações
- Descrição
- Quiz sobre Sem título, criado por gabriela.deseusa em 03-06-2015.
- Autor
- gabriela.deseusa
- Idioma
- Español
- Visualizações
- 4
- Avaliação
- Ainda sem avaliações Avalie este quiz