Quiz
Chapter 3: Check Your Understanding
Crie uma conta grátis para terminar este quiz
Salve seu progresso e veja sua nota final.
Já tem uma conta? Inicie sessão
Perguntas do quiz (15)
1What is the difference between an access port and a trunk port?
- AA trunk port belongs to a single VLAN; an access port provides access for multiple VLANs between switches
- BAn access port can have a native VLAN, but a trunk port cannot
- CAn access port can have only one device attached
- DMultiple VLANs traverse a trunk port, but an access port can belong to a single VLAN.
2Switch S1 and Switch S2 are both configured with ports in the Faculty, Students, Voice, Guest, Printing, and Admin VLANs. Each VLAN contains 12 users. How many subnets are needed to address the VLANs?
- A1
- B2
- C4
- D6
- E8
- F12
- G24
3What mechanism is used to achieve the separation between different VLANs as they cross a trunk link?
- AVLAN tagging using 892.1Q protocol
- BVLAN tagging using 802.1p protocol
- CVLAN multiplexing
- DVLAN set as a native VLAN
4What are two options to consider when configuring a trunk link between two switches? (Choose two)
- AThe switchport nonegotiate command must be configured for trunks that use DTP.
- BPort security cannot be configured on the trunk interfaces.
- CThe native VLAN must be the same on both ends of the trunk.
- DDifferent encapsulation types can be configured on both ends of the trunk link.
- ETrunk ports can be configured only on Gigabit Ethernet interfaces.
5A 24-port switch has been configured to support three VLANs named Sales, Marketing, and Finance. Each VLAN spans four ports on the switch. The network administrator has deleted the Marketing VLAN from the switch. What two statements describe the status of the ports associated with this VLAN? (Choose two)
- AThe ports are inactive
- BThe ports are administratively disabled
- CThe ports will become trunks to carry data from all remaining VLANs
- DThe ports will remain part of the Marketing VLAN until reassigned to another VLAN.
- EThe ports were released from the Marketing VLAN and automatically reassigned to VLAN 1.
6Which three statements are true about hosts that are configured in the same VLAN? (Choose three)
- AHosts in the same VLAN must be on the same IP subnet.
- BHosts in different VLANs can communicate with the aid of only the L2 switch.
- CHosts in the same VLAN share the same broadcast domain.
- DHosts in the same VLAN share the same collision domain.
- EHosts in the same VLAN comply with the same security policy.
- FHosts in the same VLAN must be on the same physical segment
7Refer to the list below. Host PC3 is unable to transfer data because it does not have the MAC address of the destination host. If PC3 sends out an ARP request broadcast, which of the other hosts will see the message?
PC1: VLAN2, S1
PC2: VLAN2, S1
PC3: VLAN3, S2
PC4: VLAN3, S2
PC5: VLAN2, S2
Trunk: S1-S2- AOnly PC3
- BOnly PC4
- COnly PC4 and PC5
- DPC1, PC2, PC4, and PC5
- EPC1, PC2, PC3, PC4, and PC5
8With each listed characteristic on the right, indicate in the blank on the left whether it reflects a normal range VLAN, an extended range VLAN, or VLAN 1. Use N for normal range VLAN, E for extended range VLAN, and 1 for VLAN 1.
- A1-1005 - N
- B1006-4094 - E
- CStored in vlan.dat - N
- DDefault management VLAN - 1
- EDefault native VLAN - 1
- FAll ports are a member of by default - 1
- GStored in running configuration file - E
9Refer to the following configuration. Host 1 is connected to interface Fa0/4 with IP address 192.168.1.22/28. Host 2 is connected to interface Fa0/5 with IP address 192.168.1.33/28. Host 3 is connected to interface F0/6 with IP address 192.168.1.30/28. Select the three statements that describe the success of pinging from one host to another. (Choose three)
Switch(config)# vlan 10
Switch(config-vlan)# name Faculty
Switch(config-vlan)# vlan 20
Switch(config-vlan)# name Staff
Switch(config-vlan)# interface range fa0/4, fa0/6
Switch(config-if-range)# switchport mode access
Switch(config-if-range)# switchport access vlan 10
Switch(config-if-range)# interface fa0/5
Switch(config-if)# switchport mode access
Switch(config-if)# switchport access vlan 20- AHost 1 can ping Host 2
- BHost 1 cannot ping Host 2
- CHost 1 can ping Host 3
- DHost 1 cannot ping Host 3
- EHost 2 can ping Host 3
- FHost 2 cannot ping Host 3
10Which three options accurately associate the Catalyst switch command with the result? (Choose three)
- Ashow vlan id vlan-id
Displays information about a specific VLAN - Bshow vlan
Displays detailed information about all VLANs on the switch - Cshow vlan brief
Displays detailed information about all VLANs on the switch - Dshow interfaces fa0/1 switchport
Displays information about a specific port - Eshow interfaces fa0/1
Displays VLAN information about a specific port
- Ashow vlan id vlan-id
11Match the commands with the correct descriptions.
- Aswitchport mode trunk
Configures the port as a permanent 802.1Q trunk - Bswitchport mode dynamic desirable
Configures the port to negotiate a trunk - Cswitchport nonegotiate
Configures the trunk to not send DTP packets - Dswitchport mode access
Disables trunk mode
- Aswitchport mode trunk
12Match the problem definition with the correct problem description.
- ANative VLAN mismatch
The VLAN configured for untagged frames is not the same on two switches connected by a trunk - BTrunk mode mismatch
Both switches are configured to dynamic auto and will not negotiate a link - CIncorrect VLAN list
Not all the VLAN needed are allowed to traverse a trunk - DVLAN subnet conflict
PCs on the same VLAN are not sharing the same address space
- ANative VLAN mismatch
13The IEEE 802.1Q protocol is an industry standard for trunking.
- AVerdadeiro
- BFalso
14Which L2 security issue sends a frame destined for one VLAN to a different VLAN by adding more than one VLAN ID to the header?
- ADouble-tagging
- BSwitch spoofing
- CPVLAN edge
- DPlaintext vty access
15Which two design considerations are best practices for switch VLAN design? (Choose two.)
- AUnused ports should be left to the default configuration
- BThe native VLAN should be an unused VLAN
- CAll unused ports should be configured as part of the black hole VLAN
- DAll unused ports should be configured as part of the native VLAN
- EA server should always be configured as a protected port
- FThe management VLAN should be a VLAN not used by any type of user traffic
- GDisable DTP messages
Informações
- Descrição
- College Cisco Networking (ITCC1404: Chapter Quizzes) Quiz sobre Chapter 3: Check Your Understanding, criado por Antje C. em 01-05-2015.
- Autor
- Antje C.
- Idioma
- English
- Visualizações
- 1
- Histórico
- Criado em 1 mai 2015 · atualizado em 19 fev 2016
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz