Quiz
CNNA 1 V4.0 - Chapter 4
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (21)
1Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.)

- AThe local host is using three client sessions.
- BThe local host is using web sessions to a remote server.
- CThe local host is listening for TCP connections using public addresses.
- DThe local host is using well-known port numbers to identify the source ports.
- EThe local host is performing the three-way handshake with 192.168.1.101:1037.
- AThe local host is using three client sessions.
22. After a web browser makes a request to a web server that is listening to the standard port, what will be the source port number in the TCP header of the response from the server?
- A13
- B53
- C80
- D1024
- E1728
- A13
33. Which information is found in both the TCP and UDP header information?
- Asequencing
- Bflow control
- Cacknowledgments
- Dsource and destination
- Asequencing
44. Which is an important characteristic of UDP?
- Aacknowledgement of data delivery
- Bminimal delays in data delivery
- Chigh reliability of data delivery
- Dsame order data delivery
- Aacknowledgement of data delivery
5Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process, Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will Server 1 take as a result?

- Acreate a Layer 1 jam signal
- Breach a timeout and resend the data that needs to be acknowledged
- Csend a RESET bit to the host
- Dchange the window size in the Layer 4 header
- Acreate a Layer 1 jam signal
6Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being performed?

- Asession establishment
- Bsegment retransmit
- Cdata transfer
- Dsession disconnect
- Asession establishment
7Refer to the exhibit. The initial TCP exchange of data between two hosts is shown in the exhibit. Assuming an initial sequence number of 0, what sequence number will be included in Acknowledgment 2 if Segment 6 is lost?

- A2
- B3
- C6
- D1850
- E3431
- F3475
88. Why is flow control used for TCP data transfer?
- Ato synchronize equipment speed for sent data
- Bto synchronize and order sequence numbers so data is sent in complete numerical order
- Cto prevent the receiver from being overwhelmed by incoming data
- Dto synchronize window size on the server
- Eto simplify data transfer to multiple hosts
- Ato synchronize equipment speed for sent data
99. During a TCP communication session, if the packets arrive to the destination out of order, what will happen to the original message?
- AThe packets will not be delivered.
- BThe packets will be retransmitted from the source.
- CThe packets will be delivered and reassembled at the destination.
- DThe packets will be delivered and not reassembled at the destination.
- AThe packets will not be delivered.
1010. With TCP/IP data encapsulation, which range of port numbers identifies all well-known applications?
- A0 to 255
- B256 to 1022
- C0 to 1023
- D1024 to 2047
- E49153 to 65535
- A0 to 255
1111. Which transport layer protocol provides low overhead and would be used for applications which do not require reliable data delivery?
- ATCP
- BIP
- CUDP
- DHTTP
- EDNS
- ATCP
1212. What are two features of the User Datagram Protocol (UDP)? (Choose two.)
- Aflow control
- Blow overhead
- Cconnectionless
- Dconnection-oriented
- Esequence and acknowledgements
- Aflow control
1313. What mechanism is used by TCP to provide flow control as segments travel from source to destination?
- Asequence numbers
- Bsession establishment
- Cwindow size
- Dacknowledgments
- Asequence numbers
1414. What is dynamically selected by the source host when forwarding data?
- Adestination logical address
- Bsource physical address
- Cdefault gateway address
- Dsource port
- Adestination logical address
1515. Why are port numbers included in the TCP header of a segment?
- Ato indicate the correct router interface that should be used to forward a segment
- Bto identify which switch ports should receive or forward the segment
- Cto determine which Layer 3 protocol should be used to encapsulate the data
- Dto enable a receiving host to forward the data to the appropriate application
- Eto allow the receiving host to assemble the packet in the proper order
- Ato indicate the correct router interface that should be used to forward a segment
1616. Which two options represent Layer 4 addressing? (Choose two.)
- Aidentifies the destination network
- Bidentifies source and destination hosts
- Cidentifies the communicating applications
- Didentifies multiple conversations between the hosts
- Eidentifies the devices communicating over the local media
- Aidentifies the destination network
1717. Which three features allow TCP to reliably and accurately track the transmission of data from source to destination?
- Aencapsulation
- Bflow control
- Cconnectionless services
- Dsession establishment
- Enumbering and sequencing
- Fbest effort delivery
- Aencapsulation
1818. Which OSI model layer is responsible for regulating the flow of information from source to destination, reliably and accurately?
- Aapplication
- Bpresentation
- Csession
- Dtransport
- Enetwork
- Aapplication
19Based on the transport layer header shown in the diagram, which of the following statements describe the established session? (Choose two.)

- AThis is a UDP header.
- BThis contains a Telnet request.
- CThis contains a TFTP data transfer.
- DThe return packet from this remote host will have an Acknowledgement Number of 43693.
- EThis is a TCP header.
- AThis is a UDP header.
2020. Which event occurs during the transport layer three-way handshake?
- AThe two applications exchange data.
- BTCP initializes the sequence numbers for the sessions.
- CUDP establishes the maximum number of bytes to be sent.
- DThe server acknowledges the bytes of data received from the client.
- AThe two applications exchange data.
21Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN message to begin session establishment. What happens next?

- AHost1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2.
- BHost1 sends a segment with the ACK flag = 1, SYN flag = 0 to Host2.
- CHost1 sends a segment with the ACK flag = 1, SYN flag = 1 to Host2.
- DHost2 sends a segment with the ACK flag = 0, SYN flag = 1 to Host1.
- EHost2 sends a segment with the ACK flag = 1, SYN flag = 0 to Host1.
- FHost2 sends a segment with the ACK flag = 1, SYN flag = 1 to Host1.
- AHost1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2.
Information
- Description
- Quiz on CNNA 1 V4.0 - Chapter 4, created by JJ CD on 29/11/2014.
- Author
- JJ CD
- Language
- Español
- Views
- 13
- Rating
- No ratings yet Rate this quiz
More on Transport Layer, TCP and UDP