Help shape GoConqr. What should we add next?

Quiz

VLAN configuration on Cisco switches: trunks and security

JJ CD 22 questions

Take the quiz

Questions in this quiz (22)

  1. 1
    Which two Layer 2 security best practices would help prevent VLAN hopping attacks? (Choose two.)
    1. AChange the native VLAN number to one that is distinct from all user VLANs and is not VLAN 1.
    2. BStatically configure all ports that connect to end-user host devices to be in trunk mode.
    3. CChange the management VLAN to a distinct VLAN that is not accessible by regular users
    4. DDisable DTP autonegotiation on end-user ports.
    5. EUse SSH for all remote management access.
  2. 2Which command should the network administrator implement to prevent the transfer of DTP frames between a Cisco switch and a non-Cisco switch?
    1. AS1(config-if)# switchport nonegotiate
    2. BS1(config-if)# switchport mode access
    3. CS1(config-if)# switchport mode dynamic desirable
    4. DS1(config-if)# switchport trunk allowed vlan none
    5. ES1(config-if)# switchport mode trunk
  3. 3
    Which three statements accurately describe VLAN types? (Choose three).
    1. AVLAN 1 is always used as the management VLAN.
    2. BA data VLAN is used to carry VLAN management data and user-generated traffic.
    3. C
      A management VLAN is any VLAN that is configured to access management features of the switch.
    4. DAfter the initial boot of an unconfigured switch, all ports are members of the default VLAN.
    5. EVoice VLANs are used to support user phone and e-mail traffic on a network.
    6. FAn 802.1Q trunk port, with a native VLAN assigned, supports both tagged and untagged traffic.
  4. 4Which command is used to remove only VLAN 20 from a switch?
    1. Ano switchport access vlan 20
    2. Bdelete flash:vlan.dat
    3. C
      delete vlan.dat
    4. Dno vlan 20
  5. 5Which switch feature ensures that no unicast, multicast, or broadcast traffic is passed between ports that are configured with this feature?
    1. APVLAN protected port
    2. B
      switch port security
    3. CACL
    4. DVLAN
  6. 6
    A Cisco switch currently allows traffic tagged with VLANs 10 and 20 across trunk port Fa0/5. What is the effect of issuing a switchport trunk allowed vlan 30 command on Fa0/5?
    1. A
      It allows a native VLAN of 30 to be implemented on Fa0/5.
    2. BIt allows VLANs 1 to 30 on Fa0/5.
    3. CIt allows only VLAN 30 on Fa0/5.
    4. DIt allows VLANs 10, 20, and 30 on Fa0/5.
  7. 7Refer to the exhibit. PC-A and PC-B are both in VLAN 60. PC-A is unable to communicate with PC-B. What is the problem?Image for question 7
    1. AThe native VLAN is being pruned from the link.
    2. BThe VLAN that is used by PC-A is not in the list of allowed VLANs on the trunk.
    3. C
      The trunk has been configured with the switchport nonegotiate command.
    4. DThe native VLAN should be VLAN 60.
  8. 8
    Which two statements are true about VLAN implementation? (Choose two.)
    1. AVLANs logically group hosts, regardless of physical location.
    2. BThe size of the collision domain is reduced.
    3. CThe network load increases significantly because of added trunking information.
    4. DDevices in one VLAN do not hear the broadcasts from devices in another VLAN.
    5. EThe number of required switches in a network decreases.
  9. 9A Cisco Catalyst switch has been added to support the use of multiple VLANs as part of an enterprise network. The network technician finds it necessary to clear all VLAN information from the switch in order to incorporate a new network design. What should the technician do to accomplish this task?
    1. A
      Delete the IP address that is assigned to the management VLAN and reboot the switch.
    2. BErase the running configuration and reboot the switch.
    3. C
      Delete the startup configuration and the vlan.dat file in the flash memory of the switch and reboot the switch.
    4. DErase the startup configuration and reboot the switch.
  10. 10What is the effect of issuing a switchport access vlan 20 command on the Fa0/18 port of a switch that does not have this VLAN in the VLAN database?
    1. AThe command will have no effect on the switch.
    2. BVLAN 20 will be created automatically.
    3. CAn error stating that VLAN 20 does not exist will be displayed and VLAN 20 is not created.
    4. DPort Fa0/18 will be shut down.

Information

Description
Quiz on Untitled, created by JJ CD on 15/04/2015.
Author
JJ CD
Language
Español
Views
1
Rating
No ratings yet
Rate this quiz
Rate this quiz

More on VLANs

Feedback

What is it about?

What should we add next?