Quiz
Pulleys and belts: power transmission and belt drives
Dieses Quiz enthält Fragetypen, die sich im gewohnten Player öffnen.
Fragen in diesem Quiz (20)
1 Illustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys dont rotate in the same direction.

- ARichtig
- BFalsch
2.Differs from in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed?

- AYes
- Bnot
- CWe dont know?
33. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are [blank_start]two[blank_end] of these pulleys, side by side, one for each leaf of the belt.

- Amethod
- Btwo
44. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another whose axis is in the same plane. This is shown with a crossed belt. An open belt may be used, but the crossed one is preferable, as it gives more surface of [blank_start]contact[blank_end].

- Amethod
- BForm
- Ccontact
- Dtransmition
54. A method of transmitting ________ from a shaft at right angles to another whose axis is in the same plane.

- Arotation
- Bmovation
66. By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.
Chose the correct image- A

- B

- C

- A
7it is made by pulleys?

- ARichtig
- BFalsch
8A method of engaging, disengaging, and reversing the upright shaft at the left. The belt is shown on the middle one of the three pulleys on the lower shafts, a, b, which pulley is loose, and consequently no movement is communicated to the said shafts. When the belt is traversed on the left-hand pulley, which is fast on the hollow shaft, b, carrying the bevel-gear, B, motion is communicated in one direction to the upright shaft; and on its being traversed on to the right-hand pulley, motion is transmitted through the gear, A, fast on the shaft, a, which runs inside of b, and the direction of the upright shaft is reversed.
chose the correct image to the definition- A

- B

- A
9chose the correct immage acorrding the definiton
Speed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.- A

- B

- A
10Cone-pulleys for the same purpose as 10. This motion is used in cotton machinery, and in all machines which are required to run with a gradually increased or diminished speed.
- ARichtig
- BFalsch
11chose the correct definiton to the image

- AIs a modification of 9, the pulleys being of different shape.
- BIs a modification of 7, the pulleys being of different shape.
1211. Another method of effecting the same result as 1, without guide-pulleys.

- Atrue
- Bfalse
1312. Simple pulley used for lifting weights. In this the power must be equal to the weight to obtain equilibrium.
- ARichtig
- BFalsch
14. Blocks and tackle. The power obtained by this contrivance is calculated as follows: Divide the weight by double the number of pulleys in the lower block; the quotient is the power required to balance the weight.
what mechanisim it is?- A

- B

- A
1515. Represents what are known as White’s pulleys, which can either be made with separate loose pulleys, or a series of grooves can be cut in a liquid block, the diameters being made in proportion to the speed of the rope; that is, 1, 3, and 5 for one block, and 2, 4, and 6 for the other. Power as 1 to 7.

- Atrue
- Bfalse
16this are called bartons?

- ARichtig
- BFalsch
17. Is a combination of three fixed pulleys and one movable pulley.

- Atrue
- Bfalse
- Cyes and not
1819, 20, 21 and 22. Are different arrangements of pulleys. The following rule applies to these pulleys:—In a system of pulleys where each pulley is embraced by a cord attached at one end to a fixed point and at the other to the center of the movable pulley, the effect of the whole will be = the number 2, multiplied by itself as many times as there are movable pulleys in the system.

- ARichtig
- BFalsch
1919, 20, 21 and 22. Are different arrangements of pulleys. The following rule applies to these pulleys:—In a system of pulleys where each pulley is embraced by a cord attached at one end to a fixed point and at the other to the center of the movable pulley, the effect of the whole will be = the number 2, multiplied by itself as many times as there are movable pulleys in the system.
- A

- B

- A
20it this a mechaical engine?

- ARichtig
- BFalsch
Informationen
- Beschreibung
- Quiz am Ohne Titel, erstellt von Iker Diaz Bravo am 29/10/2021.
- Autor
- Iker Diaz Bravo
- Sprache
- Español
- Aufrufe
- 11
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz
Mehr zu Gears, Pulleys and Belt Drives