Ajude a dar forma ao GoConqr. O que a gente deve adicionar?

Quiz

Pulleys and belts: power transmission and belt drives

Iker Diaz Bravo 20 perguntas

Fazer o quiz

Este quiz tem tipos de pergunta que abrem no player de sempre.

Perguntas do quiz (20)

  1. 1 Illustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys dont rotate in the same direction.

    Imagem da pergunta 1
    1. AVerdadeiro
    2. BFalso
  2. 2.Differs from in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed?Imagem da pergunta 2
    1. AYes
    2. Bnot
    3. CWe dont know?
  3. 33. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are [blank_start]two[blank_end] of these pulleys, side by side, one for each leaf of the belt.

    Imagem da pergunta 3
    1. Amethod
    2. Btwo
  4. 44. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another whose axis is in the same plane. This is shown with a crossed belt. An open belt may be used, but the crossed one is preferable, as it gives more surface of [blank_start]contact[blank_end].

    Imagem da pergunta 4
    1. Amethod
    2. BForm
    3. Ccontact
    4. Dtransmition
  5. 54. A method of transmitting ________ from a shaft at right angles to another whose axis is in the same plane.Imagem da pergunta 5
    1. Arotation
    2. Bmovation
  6. 66. By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

    Chose the correct image
    1. AImagem da opção A
    2. BImagem da opção B
    3. CImagem da opção C
  7. 7it is made by pulleys?Imagem da pergunta 7
    1. AVerdadeiro
    2. BFalso
  8. 8A method of engaging, disengaging, and reversing the upright shaft at the left. The belt is shown on the middle one of the three pulleys on the lower shafts, a, b, which pulley is loose, and consequently no movement is communicated to the said shafts. When the belt is traversed on the left-hand pulley, which is fast on the hollow shaft, b, carrying the bevel-gear, B, motion is communicated in one direction to the upright shaft; and on its being traversed on to the right-hand pulley, motion is transmitted through the gear, A, fast on the shaft, a, which runs inside of b, and the direction of the upright shaft is reversed.
    chose the correct image to the definition
    1. AImagem da opção A
    2. BImagem da opção B
  9. 9chose the correct immage acorrding the definiton
    Speed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.

    1. AImagem da opção A
    2. BImagem da opção B
  10. 10Cone-pulleys for the same purpose as 10. This motion is used in cotton machinery, and in all machines which are required to run with a gradually increased or diminished speed.

    1. AVerdadeiro
    2. BFalso

Informações

Descrição
Quiz sobre Sem título, criado por Iker Diaz Bravo em 29-10-2021.
Idioma
Español
Visualizações
11
Avaliação
Ainda sem avaliações
Avalie este quiz
Avalie este quiz

Mais sobre Gears, Pulleys and Belt Drives

Fale Conosco

Sobre o que é sua mensagem?

O que a gente deve adicionar?