Quiz
Chapter 9 - End Effectors
Erstelle ein kostenloses Konto, um dieses Quiz zu beenden
Speichere deinen Fortschritt und sieh dir dein Endergebnis an.
oder mit deiner E-Mail registrieren
Schon ein Konto? Anmelden
Fragen in diesem Quiz (31)
1Which of the following describes prehensile movements of an end effector?
- AActions that require the use of the thumb and fingers to grasp objects
- BActions that do not require particular finger dexterity or use of the thumb
- CActions that require large amounts of force to lift heavy objects.
- DActions that require very small amounts of force to lift objects.
2Which of the following describes nonprehensile movements of an end effector?
- AActions that require the use of the thumb and fingers to grasp objects
- BActions that do not require particular finger dexterity or use of the thumb.
- CActions that require large amounts of force to lift heavy objects.
- DActions that require very small amounts of force to lift objects.
3Which of the following is not one of the five types of gripping movements an end effector can make?
- APalmar
- BCylindrical
- CSpherical
- DPinch
4Which of these best describes the hook movement of an end effector?
- ACurling the tips of the fingers to pull or lift objects
- BExtending the fingers and thumb outward until they make contact with the interior walls of a hollow object
- CWrapping the fingers and thumb around an object
- DForming a "C" shape with the fingers and thumb
5Which of these best describes the spread movement of an end effector?
- ACurling the tips of the fingers to pull or lift objects
- BExtending the fingers and thumb outward until they make contact with the interior walls of a hollow object
- CWrapping the fingers and thumb around an object
- DForming a "C" shape with the fingers and thumb
6Pinchers and grippers are the two major classifications of end effectors.
- ARichtig
- BFalsch
7For which of these tasks are mechanical finger grippers typically used?
- AGrasping objects
- BPicking and placing cylindrical parts
- CMoving objects with the use of suction
- DMoving metal parts with magnetic fields
8________ grippers simulate the action of a human thumb, index finger, and third finger.
- ATwo-finger
- BThree-finger
- CFour-finger
- DCollet
9For which of these tasks are vacuum grippers typically used?
- AGrasping objects
- BPicking and placing cylindrical parts
- CMoving objects with the use of suction
- DMoving metal parts with magnetic fields
10What is a major disadvantage of using electromechanical grippers?
- AThey can only be used to handle plastic parts.
- BThey can only be used to handle parts that contain iron.
- CThey are not able to be used with parts that contain iron.
- DThey can only be used to handle wooden parts.
11Which of these is not one of the three categories of tools used for robotic applications?
- AWelding tools
- BMaterial application tools
- CPainting tools
- DMachining and assembly tools
12What are the advantages of using automatic tool changers?
- AIncreases productivity by allowing the robot to perform multiple operations.
- BSlows down production jobs because the operator must change out the tools.
- CAllows the robot to lift heavier loads.
- DIncreases the speed at which a robot can home itself.
13When designing a robotic system with changeable end effectors, the interface adapters must be standardized.
- ARichtig
- BFalsch
14Which of the following best describes how breakaway devices and overload sensors provide protection for robotic systems?
- AThey break to prevent strain on more expensive parts of the system.
- BThey are made of strong materials that do not break easily so that excess strain is transferred to more expensive components.
- CThey use sensors to locate parts that need to be moved.
- DThey send a signal to the controller when a misaligned part is detected.
15Which of the following best describes compliance?
- AWhen a robot does what it is told to do.
- BWhen a robot meets all production standards.
- CThe ability of an end-effector to tolerate the misalignment of mating parts.
- DThe ability of a robot to auto tool change.
16How can compliance of an end effector be increased?
- ABy adding a Mobile proximity warning system
- BBy adding a remote center bearing (RCB) system
- CBy increasing the amount of "play" in the gripper system
- DBy adding a remote center compliance (RCC) device
17________ grippers are end effectors that clamp irregularly-shaped workpieces using mechanical fingers equipped with hollow rubber envelopes.
- AElectromechanical
- BCollet
- CExpandable
- DVacuum
18A ____ gripper delivers 360° of clamping contact.
- Athree-finger
- Bcollet
- Cmechanical finger
- Dvacuum
19Nonprehensile end effector movements include pushing, poking, punching, and hooking.
- ARichtig
- BFalsch
20Using the thumb to grasp objects is required for ________ movements.
- Anonprehensile
- Bprehensile
- Cmechanical
- Dcompliance
21Mechanical finger grippers move in either parallel or angular motion to grasp an object.
- ARichtig
- BFalsch
22Wrapping the fingers and thumb around an object
- Apalmar grip
- Bcylindrical grip
- Cspherical grip
- Dlateral grip
23Forming a C-shape with the fingers and thumb to grasp an object.
- ASpherical
- BLateral
- CCylindrical
- DPalmar
24Using the fingers and thumb to hold round objects like holding a ball.
- APalmar
- BCylindrical
- CSpherical
- DLateral
25Grasping flat objects from the sides with the fingers and thumb like a quarter.
- ALateral
- BSpherical
- CCylindrical
- DPalmar
26Using the tip of the index finger and the thumb to hold an object like a key.
- AOppositional grip
- BCylindrical grip
- CSpherical grip
- DLateral grip
27Non-prehensile movements are (choose 4)
- Apushing
- Bpoking
- Cpunching
- Dhooking
- Ecurling
28Grippers are end effectors that perform prehensile movements by grasping objects and moving them
- ARichtig
- BFalsch
29Tools are end effectors that execute nonprehensile movements to perform specific tasks such as welding or painting.
- ARichtig
- BFalsch
30Remote center compliance (RCC) device is installed in wrist of the robot and helps to compensate for misalignment and irregularities.
- ARichtig
- BFalsch
31Overload sensor device detects obstructions or overload conditions.
- ARichtig
- BFalsch
Informationen
- Beschreibung
- Robotics Quiz am Chapter 9 - End Effectors, erstellt von Cheryl Connelly am 22/03/2023.
- Autor
- Cheryl Connelly
- Sprache
- English
- Aufrufe
- 0
- Schlagwörter
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz