GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Kostenlos registrieren

Quiz

3.15 Pressure vessels

TRAVIS CANNING 9 Fragen

Quiz starten

Fragen in diesem Quiz (9)

  1. 1Thermo Loads are
    1. ALoads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
    2. Bloads are transient and, when the occur, can result In the production of vibratory forces
    3. CThe design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
    4. DPressure vessels located outdoors have additional stresses imposed by wind.
  2. 2The ______ code uses area replacement as the basis for reinforcement calculations
    1. Acsa b51
    2. Bcsa b52
    3. Casme
    4. Dwleders
  3. 3Design pressure is
    1. Aa higher pressure than the operating pressure and is used to determine the minimum required thickness for the pressure vessel
    2. Bthe minimum required pressure
    3. Cequal to the operating pressure
    4. D1.5 times the maximum working pressure
  4. 4Attachment loads are
    1. ALoads caused by piping and equipment attached to the pressure vessel and transferred to the vessel by nozzles
    2. Bloads are transient, and when they occur can result in the production of vibratory forces
    3. Cthe design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
    4. Dpressure vessels located outdoors have additional stresses imposed by wind
  5. 5Routine ________ is the key to maximizing the production and life of pressure vessels
    1. Atesting
    2. Boperations
    3. Cshutdowns
    4. Dmaintenance
  6. 6___________ ______ are leak proof containers that have an internal or external operating pressure
    1. Apressure vessels
    2. BFired boilers
    3. CFractionation towers
    4. DMilk cartons
  7. 7Seismic loads are:
    1. ALoads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
    2. Bloads are transient and, when they occur, can result in the production of vibratory forces
    3. CThe design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
    4. DPressure vessels located outdoors have additional stresses imposed by wind.
  8. 8It is standard practice to __________ an opening with the same cross-sectional area that was removed.
    1. Amake
    2. Breinforce
    3. Ccut
    4. Dreplace
  9. 9The primary hazard in __________ testing is the amount of energy stored in the compressed gas during the test.
    1. Ahydrostatic
    2. Bpneumatic
    3. Cradiography
    4. Dmag particle

Informationen

Beschreibung
Quiz am 3.15 Pressure vessels, erstellt von TRAVIS CANNING am 29/01/2016.
Sprache
English
Aufrufe
361
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck