Test
3.15 Pressure vessels
Preguntas del test (9)
1Thermo Loads are
- ALoads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
- Bloads are transient and, when the occur, can result In the production of vibratory forces
- CThe design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
- DPressure vessels located outdoors have additional stresses imposed by wind.
2The ______ code uses area replacement as the basis for reinforcement calculations
- Acsa b51
- Bcsa b52
- Casme
- Dwleders
3Design pressure is
- Aa higher pressure than the operating pressure and is used to determine the minimum required thickness for the pressure vessel
- Bthe minimum required pressure
- Cequal to the operating pressure
- D1.5 times the maximum working pressure
4Attachment loads are
- ALoads caused by piping and equipment attached to the pressure vessel and transferred to the vessel by nozzles
- Bloads are transient, and when they occur can result in the production of vibratory forces
- Cthe design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
- Dpressure vessels located outdoors have additional stresses imposed by wind
5Routine ________ is the key to maximizing the production and life of pressure vessels
- Atesting
- Boperations
- Cshutdowns
- Dmaintenance
6___________ ______ are leak proof containers that have an internal or external operating pressure
- Apressure vessels
- BFired boilers
- CFractionation towers
- DMilk cartons
7Seismic loads are:
- ALoads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
- Bloads are transient and, when they occur, can result in the production of vibratory forces
- CThe design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
- DPressure vessels located outdoors have additional stresses imposed by wind.
8It is standard practice to __________ an opening with the same cross-sectional area that was removed.
- Amake
- Breinforce
- Ccut
- Dreplace
9The primary hazard in __________ testing is the amount of energy stored in the compressed gas during the test.
- Ahydrostatic
- Bpneumatic
- Cradiography
- Dmag particle
Información
- Descripción
- Test sobre 3.15 Pressure vessels, creado por TRAVIS CANNING el 29/01/2016.
- Autor
- TRAVIS CANNING
- Idioma
- English
- Visitas
- 361
- Valoración
- Aún sin valoraciones Valora este test