GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Karteikarten

Digital Electronics Midterm Study Guide

Ashley Goodnight Englisch 39 Karten

Digital Electronics Midterm Study Guide

Karten in diesem Stapel (39)

  1. 1Which of the answers below states 17500000 in proper scientific notation?1.75 x 10^7
  2. 2Which of the following answers below states 0.0047 F in proper engineering notation?4.7 mF
  3. 319(10) =10011(2)
  4. 4Properly convert 119 to a binary number01110111(2)
  5. 5A circuit with 4 inputs will have ___ rows in the truth table generated from it.16
  6. 6In Boolean Algebra, an AND function is represented with the _____ symbolMultiplication
  7. 7In Boolean Algebra, an OR function is represented with the ______ symbolAddition
  8. 8Properly convert 0010 1001 (2) to a base 10 number41 (10)
  9. 9Which of the answers below states 17500000 (Hz) in proper engineering notation?17.5 MHz
  10. 10Choose the correct answer to the problem below: 3.45 MHz - 45.2 kHZ =3.41 MHz
  11. 11Choose the correct answer to the problem below: 1.05 Hz + 845 mHz =1.90 Hz
  12. 12Properly express 95.9 mHz in Hz.096 Hz
  13. 13Review the truth table below. Choose the answer which lists all of the miniterms in the truth tableX'Y'Z+X'YZ+XY'ZReview the truth table below. Choose the answer which lists all of the miniterms in the truth table
  14. 14Review the following truth table. Which logic expression for this table is expressed in the most simplified form?X'Z' +X'Y+YZ'Review the following truth table. Which logic expression for this table is expressed in the most simplified form?
  15. 15Review the Boolean equation below. Which Boolean equation would be an equivalent equation after using the Consensus Theorem: A' + AC+ B'A' + C + B'
  16. 16According to the rules of Boolean Algebra; what is X times X' always equal to?0
  17. 17X' * X =0
  18. 18X + X =X
  19. 19X + 1 =1
  20. 20Using the graph below, and Ohms Law; Calculate the resistor value required to have a luminous intensity of 2.5, assuming the voltage is 3.5 volts150 OhmsUsing the graph below, and Ohms Law; Calculate the resistor value required to have a luminous intensity of 2.5, assuming the voltage is 3...
  21. 21Below is an image of a D-flip flop. Match the roman numeral (i to iv) to the appropriate input or output in the right hand column.i. D
    ii. CLK
    iii. Q
    iv. Not Q
    Below is an image of a D-flip flop. Match the roman numeral (i to iv) to the appropriate input or output in the right hand column.
  22. 22Review the NAND-circuit below: Which option properly simplifies the circuit?BReview the NAND-circuit below: Which option properly simplifies the circuit?
  23. 23Under what conditions would it be desirable to use a JK FlipFLop like the one shown below?When you want the Flip Flop to be triggered at the falling edge of the clockUnder what conditions would it be desirable to use a JK FlipFLop like the one shown below?
  24. 24Refer to the image. Using the matching drop down box, match the letter of each NAND/NOR combination to the AOI gate which it replaces.A: AND
    B: OR
    C: AND
    D: OR
    Refer to the image. Using the matching drop down box, match the letter of each NAND/NOR combination to the AOI gate which it replaces.
  25. 25Simplification of the Boolean expression (A+B)'(C+D+E)'+(A+B)' yields which of the following resultsA'B'
  26. 26Which of the following un-simplified Boolean expressions represent the logic circuit shown below?F = ABC'+A'B+CWhich of the following un-simplified Boolean expressions represent the logic circuit shown below?
  27. 27Use De Morgan's law to simplify the following expressionAC'+ABUse De Morgan's law to simplify the following expression
  28. 28Analyze the following circuit. If X=1, Y=0, and Z=1, then the F1 is1Analyze the following circuit. If X=1, Y=0, and Z=1, then the F1 is
  29. 29Which of the following logic circuits correctly implements the equation: F = xY'+YZ'Which of the following logic circuits correctly implements the equation: F = xY'+YZ'
  30. 30Draw a truth table to represent the logic equation for an OR gateDraw a truth table to represent the logic equation for an OR gate
  31. 31What is the chip name for 1: AND gates, 2: OR gates, 3: NOT gatesAND 74LS08
    OR 74LS32
    NOT 74LS04
  32. 32What are the equations for Series Circuits?Rtotal = R1 + R2 + R3
    Itotal = I1 = I3 = I4
    Vtotal = V1 + V2 + V3
  33. 33What are the equations for Parallel Circuits?1/Rtotal = 1/R1 + 1/R2 +1/R3
    Itotal = I1 + I2 + I3
    Vtotal = V1 = V2 = V3
  34. 34What is the progression of digital design tools?1. transistors
    2. gates
    3. integrated chips
    4. programmable logic devices
    5. microcomputers/microcontrollers
  35. 3510^12 10^9 10^6 10^3 10^-3 10^-6 10^-9 10^-12 10^-15tera
    giga
    mega
    kilo
    mili
    micro
    nano
    pico
    femto
  36. 36Features of Analog Signals- continuous
    - infinite range of values
    - more exact values, but more difficult to work with
  37. 37Features of Digital Signals- discrete
    - finite range of values
    - not as exact as analog, but easier to work with
  38. 38What types of graphs are associated with Analog Signals?1. Sin waves
    2. Square waves
    3. Random-Periodic
  39. 39Parts of a Digital Signals- time high
    - time low
    - rising edge
    - falling edge
    - duty cycle

Informationen

Beschreibung
Karteikarten am Digital Electronics Midterm Study Guide, erstellt von Ashley Goodnight am 19/01/2020.
Erstellt von
Ashley Goodnight
Aufrufe
1
Bewertung

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck