Gestalte GoConqr mit. Was sollen wir als Nächstes hinzufügen?

Mindmap

Week 9

Micky Marshall AUDITING Englisch

Inhalt der Mindmap

Week 9

  1. Overview of Substantive Procedures

    • The combination of inherent risk and control risk (the risk of material misstatement determines the level of detection risk. There is an inverse relationship betweenthe auditor’s assessed risk of material misstatement and detection risk. Example: - if the combined inherent risk and control risk is high (that is, the client is in a high-risk industry and the account has a higher chance of being materially misstated if there are no controls put in place and no controls have been tested), the amount of detection risk the auditor is willing to accept is low and therefore significant substantive procedures are necessary to reduce the detection risk. - If the combined inherent risk and controlrisk are low (that is, the client is in a low-risk industry and the account has a lower chance of being materially misstated if there are no controls put in place and controls have been tested), the amount of detection risk the auditor is willing to accept is high and therefore only a small number of substantive procedures are necessary to reduce the detection risk.
    • Objective of each assertion relates to the particular type of account or disclosure
      • "It is clear from this example that testing performed on sales revenue transactions will also provide evidenceon trade receivables in the balance sheet and on the financial report disclosures; however, there will still need to be additional testing performed on the trade receivables balance regarding the other assertions not addressed by this example (such as testing the valuation assertion)."
      • Care should be taken not to assume that similar assertions across all three types of assertions are exactly the same. Example: ‘classification’ (realtes transactions being recorded in proper accounts) in the income statement is not exactly the same as ‘classificationand understandability’ (relates to financial disclosures being properly presented and described) in the financial report. This is slightly different to the first audit assertion.The first assertion is focused on the transaction being captured in the correct general ledger account.The second assertion is focused on it being presented, described in the notes and disclosed correctly andclearly in the financial report.
      • Refer to slide 4
    • Definition of substantive procedures
      • Substantive procedures are designed to obtain direct evidence as to the completeness, accuracy and validity of data, and the reasonableness of the estimates and other information contained in the financial report. These procedures are referred to as substantive testing. Substantive testing include: - inspection - observation - enquiry - confirmation - recalculation - re-performance - analytical reviews Substantive testing is influenced by several facotrs, the most important being the overall risk assessment.
      • Audit program
        • Prior to assessing the several factors (including the risk assessment), the auditor will have performed planning procedures and controls testing (including testing any controls identified that the auditor intends to place reliance on). The results of these planning and interim procedures allow the auditor to make an overall assessment as to how much detection risk still exists prior to any substantive testing being performed. The auditor then designs what they believe are appropriate substantive audit procedures that will allow material errors and exceptions to be identified and rectified before an overall conclusion is made. These procedures are documented in what is usually referred to as the audit program. Audit Program: The audit program typically includes all of the planning, interim and year-end testing procedures with enough detail to enable the auditor to understand the nature, timing and extent (or scope) of testing required. It details the controls testing as well as the resulting substantive procedure.
        • Nature, extent and timing of the testing required
          • 1. The nature of the test
            • The nature of the test (some lend themselves more easily to being performed during the year-end visit as opposed to during the interim audit visit(s)). Example: Vouching prepayment amounts to their supporting documentation (the invoices that were paid during the year) is easy to perform prior to year-end; verifying the calculation of the split between the amount to be recognised as a prepayment and the amount to be expensed in the income statement is easiest to perform at or after year-end.
          • 2. The level of assurance necessary
            • The level of assurance necessary (reasonable assurance requires more evidence to be obtained from substantive procedures than limited assurance in order to reach a conclusion).
          • 3. The type of evidence required
            • The type of evidence required (for example, are the procedures designed to provide persuasive, corroborative or minimal audit evidence?)
          • 4. The complexity of the client's data system
            • The complexity of the client’s data capturing systems (the more complex the systems, the more complex and sophisticated the substantive audit procedures may need to be).
          • Some tests are required by auditing standards
            • There are certain substantive procedures that are required to be considered. If they are not performed, the standards require documentation to be contained in the audit working papers explaining what alternative procedures were performed to address these required procedures. These include: - sending bank confirmations; - observing stocktake; or - examination of material journal entries
  2. Relationship between risk assessment and the nature, timing and extent of the substantive procedures

    • The nature, timing and extent of substantive procedures are in response to the risk assessments for each of the relevant sources of information affecting a significant account.
    • Timing of subtantive procedures
      • The timing of substantive procedures is directly influenced by the level of control risk (that is, how much assurance has already been gained from the controls testing performed). Typically substantive testing tends to be performed at or near year-end, with controls testing performedduring visits prior to year-end (interim).
      • Timing of substantive procedures is a matter of convenience and whether it is expected to contribute to audit efficiencies. It is normal for an auditor to perform as much audit testing as possible prior to the client’s year-end due to the large number of clients needing their audits completed by the same date. The more work that is performed prior to the year-end visit, the less year-end work that needs to be performed during the audit firm’s ‘busy season’, allowing more flexibility in performing audits.
      • Roll-over procedures (year-end)
        • Whenever substantive procedures are performed prior to year-end, the auditor performs roll-forward procedures to update their audit findings from the time of the interim procedures through to year-end. The nature and extent of these roll-forward procedures are matters of judgement and are responsive to the risk assessment. Example: - when the entity’s control environment has been assessed as effective,controls have been tested, and no significant changes in the control environment and controls haveoccurred, limited roll-forward procedures such as analytical procedures or limited testing of intervening transactions may be all that is necessary.
        • The auditor might also perform substantive procedures prior to year-end because of a client reporting requirement. Performing substantive procedures prior to year-end, in the absence of specific effective controls, maybe acceptable when the auditor is able to conclude overall that the client’s control environment is effective and the likelihood of errors of audit importance is not high, or when they can perform sufficient procedures both at an interim date and during the intervening period (often referred to as the ‘roll-forward period’).
        • Roll-forward procedure
          • Roll-forward procedure: The nature of the roll-forward procedures performed is responsive to the risk associated with the absence of controls and the timing of substantive procedures.
      • Year-end & prior to year-end
  3. Substantive Audit Procedures

    • Substantive procedures that are not analytical procedures are referred to as ‘tests of details’ and are predominantly designed to verify a balance or a transaction back to supporting documentation. These tests of details are called ‘vouching’ or ‘tracing’. The three main types of tests of details that are also techniques applied when deciding how much of a balance to test include: 1. key item testing 2. representative sampling 3. other tests of transactions/underlying data.
    • Vouching
      • Vouching – When a balance or an amount in the accounts is verified back to third party info (e.g. supplier invoice or delivery documentation). Because vouching involves testing and verifying information already recorded in the accounting records, the primary purpose of the testing is to ensure the balances or transactions are not overstated (for example, existence and occurrence assertions).
    • Tracing
      • Tracing is when a source document is traced to the underlying accounting records. Because tracing involves testing and verifying information outside of the accounting records that is not necessarily recorded (for instance, on a source document such as an invoice), the primary purpose of the testing is to ensure the balances are not understated (for example, completeness assertion).
    • 1. key item testing
      • When conducting substantive testing, the auditor uses either a statistical basis or professional judgement to identify and test key items within a balance. Their focus is on selecting the largest transactions within a balance to obtain ‘coverage’ over the total. That is, by selecting the largest transactions to test, the auditor is able to conclude over the entire balance based on the conclusions they reached by testing the largest transactions within a balance.
      • 2. representative sampling
        • After key items have been segregated, there may remain a large population of items that are individually unimportant but significant in total. If risk assessments indicate the results of key item testing do not provide sufficient evidence for concluding that the population is free from material errors, the auditor obtains additional required evidence by selecting a sample from the remainder of the population (after excluding the key items). When sampling from the remainder of the population, the sample items are selected (either statistically or non-statistically) in such a way that the sample is expected to be representative of that remaining population.
        • 3. other tests of transactions/underlying data.
  4. Levels of Evidence

    • Several different levels of evidence are obtained when performing substantive procedures, depending on the type of substantive procedure performed. Evidence can be: 1. Persuasive 2. Corroborative 3. Minimal; or 4. General.
    • 1. Persuasive
      • The effect of classifying an analytical review procedure as persuasive means that no further substantive procedures need to be performed on the related account balance, even in moderate risk situations. Accordingly, careful consideration must be given to the quality of evidence provided by the particular analytical procedure before the auditor concludes that the analytical procedure is persuasive.
    • 2. Corroborative
      • An analytical procedure provides corroborative evidence if it (1) confirms audit findings from other procedures and (2) supports management representations or otherwise decreases the level of audit scepticism. A corroborative analytical procedure includes comparisons of account balances to expectations developed and documented earlier in the audit. These comparisons generally provide corroborative evidence about an account balance and enable the auditor to limit the extent of other procedures in that area. In these cases, the auditor’s understanding of the client’s business should help confirm the reasonablenessof a balance.
    • 3. Minimal
      • Analytical procedures that do not provide persuasive or corroborative evidence contribute minimal support for the conclusion. Example: - they may simply compare a current-year overall balance (for example, inventory) to the prior-year balance to help identify potential problems or trends and not to reduce the extent ofother substantive procedures.

Informationen

Beschreibung
AUDITING Mindmap am Week 9, erstellt von Micky Marshall am 12/10/2018.
Erstellt von
Micky Marshall · Okt 2018
Aktualisiert
18 Okt 2018
Aufrufe
0
Bewertung

Mehr zu Audit Procedures and Tests

Feedback

Worum geht es?

Was sollen wir als Nächstes hinzufügen?