Mock exam Y10

Mock exam Y10

1. Tools

   • Can you name all the tools you have used in the workshop?
   • Can you give an example of where / how / when you would use a specific tool?
     • Cutting and shaping
       • https://docs.google.com/presentation/d/1dQns18LKEqIqLlJ9ZQSqQfSjmracjVqYq-QfCrWMShw/edit#slide=id.p
     • Marking out
       • https://docs.google.com/presentation/d/1dQns18LKEqIqLlJ9ZQSqQfSjmracjVqYq-QfCrWMShw/edit#slide=id.p

2. Materials

   • Wood
   • Can you name a variety of woods?
     • https://docs.google.com/presentation/d/10rFy0ZPnDROMWcdI9RsoAVxC43wZKXk0lpTRpy8C0DM/edit#slide=id.p
   • Can you explain why a product is made from a specific material? ; use its physical properties
   • Can you discuss the impact a material has on the environment?
     • Life cycle of wood
       • https://docs.google.com/presentation/d/1UiSrlSpvlq4kP7-KAVWW670Z-8T1QyccrK2rlsVN2w4/edit#slide=id.p

3. Processes

   • Can you explain manufacturing processes used to make a product?
   • Joints
     • Can you name specific joints used with wood?
     • Can you explain how you would go about marking-out / cutting / assembling the joints?
   • Adhesives
     • Can you name specific glues to use with wood and other materials you might want to glue onto wood?
       • Adhesives and fixings for wood
         • https://docs.google.com/presentation/d/1fKEJjkMmlPq55W13sbN596hW9q2UucfIgZLfWBCOpgg/edit#slide=id.p
   • Can you explain how you would use jigs and fixtures to make a quantity of products all the same?
   • Wood joints / forming / finishing
     • https://docs.google.com/presentation/d/1ZMYeZtCBQs70gXDSZ5SuxbyEoO3thcSINdHGeigfwus/edit#slide=id.g4daa33f67_036

4. Sustainablity

   • Sustainability
   • Can you explain the life cycle of wood?
   • Can you explain how a product should be designed with the 6R in-mind?

5. Product evaluation

   • Can you compare to products against each other using ergonomics ?
     • Product analysis
   • Can you talk about customer anthropometrics, and how the effect the design of a product?

6. Section A: Design

   • Q1: Can you list 3 requiremts for a product and explin them?
   • Q2: Can you sketch 5 designs in 3D in 20 minutes?
     • Existing products analysed
       • Example 1 (follow link)
         • http://www.technologystudent.com/despro_flsh/gamestore2.html
       • Example 2
         • http://www.technologystudent.com/despro_flsh/gamestore3.html
       • Example
         • http://www.technologystudent.com/despro_flsh/gamestore6.html
   • Q3: Can you draw your final design in detail with sizes / material / finishes / joints / and notes to explain features?
   • Q4: Can you evaluate your design using your original specification points from Q1 ?

Bilder und Dateien der Mindmap