Quiz
Chapter 2 - Check Your Understanding
Erstelle ein kostenloses Konto, um dieses Quiz zu beenden
Speichere deinen Fortschritt und sieh dir dein Endergebnis an.
oder mit deiner E-Mail registrieren
Schon ein Konto? Anmelden
Fragen in diesem Quiz (12)
1Which three options correctly associate the command with the paired behavior? (Choose three)
- Aswitchport port-security violation protect: Frames with unknown source addresses are dropped and a notification is sent
- Bswitchport port-security violation restrict: Frames with unknown source addresses are dropped and no notification is sent
- Cswitchport port-security violation shutdown: Frames with unknown source addresses result in the port becoming error-disabled, and a notification is sent.
- Dswitchport port-security mac-address sticky: Allows dynamically learned MAC addresses to be stored in the running-configuration
- Eswitchport port-security maximum: Defines the number of MAC addresses associated with a port
2What is the effect of entering the following command on a Fast Ethernet switch port?
SW1(config-if)#duplex full- AThe connected device communicates in two directions, but only one direction at a time.
- BThe switch port returns to its default configuration.
- CIf the device connected to this port is also set for full duplex, the device participates in collision-free communication.
- DThe efficiency of this configuration is typically rated at 50 to 60 percent.
- EThe connected device should be configured as half duplex.
3Which two tasks does auto-negotiation in an Ethernet network accomplish? (Choose two)
- ASets the link speed
- BSets the IP address
- CSets the link duplex
- DSets MAC address assignments on switch ports
- ESets the ring speed
4Why should a default gateway be assigned to a switch?
- ASo that there can be remote connectivity to the switch via such programs as Telnet and ping.
- BSo that frames can be sent through the switch to the router.
- CSo that frames generated from workstations and destined for remote networks can pass to a higher level.
- DSo that other networks can be accessed from the command prompt of the switch.
5The network administrator wants to configure an IP address on a Cisco switch. How does the network administrator assign the IP address?
- AIn privileged EXEC mode
- BOn the switch interface FastEthernet0/0
- COn the management VLAN
- DOn the physical interface connected to the router or next-hop device
6Which option correctly associates the L2 security attack with the description?
- AMAC address flooding: Broadcast requests for IP addresses with spoofed MAC addresses
- BDHCP starvation: Using proprietary Cisco protocols to gain information about a switch
- CCDP attack: the attacker fills the switch MAC address table with invalid MAC addresses
- DTelnet attack: Using brute force password attacks to gain access to a switch
7What is an advantage of using SSH over Telnet when remotely connecting to a switch?
- AEncryption
- BMore connection lines
- CConnection-oriented services
- DUsername and password authentication
8Consider the configuration. Which two commands are not needed on the switch in order for a remote network administrator to access the switch using SSH?
- ASwitch(config)# ip domain-name mydomain.com
- BSwitch(config)# crypto key generate rsa
- CSwitch(config)# ip ssh version 2
- DSwitch(config)# line vty 0 15
- ESwitch(config-if)# transport input ssh
9What is an advantage of having the correct date and time on a network device?
- ANetwork administrators are provided with correct timestamps on log messages.
- BWhen working at the console prompt, the network administrator has a good idea how long the configuration or troubleshooting process is taking.
- COther devices can use CDP to discover neighbor device information if the time and date are synchronized between the two devices.
- DSecure remote connectivity can be accomplished if the date and time are accurate.
10What is the purpose of DHCP snooping?
- AEnsures devices are configured for automatic IP address assignment
- BPrevents unauthorized DHCP servers
- CPrevents DHCP messages fro going across the trunk
- DPrevents DHCP messages from being sent to another network
11What is a Cisco best practice for deploying switches?
- AWhen a server connects to a switch, the switch port should have the port speed manually configured, but the auto-negotiation feature used for duplex.
- BA compound word should be used as a password on an infrastructure network device such as a switch.
- CTelnet should be used whenever possible on the switch vty lines.
- DThe enable secret password should be used when configuring a switch to use SSH on the vty lines.
12When would auto-MDIX be best to use?
- AWhen a switch connects to a router
- BWhen a switch connects to another switch
- CWhen any device connects to an access layer switch
- DWhen the cable type is unknown
Informationen
- Beschreibung
- College Cisco Networking (ITCC1404: Chapter Quizzes) Quiz am Chapter 2 - Check Your Understanding, erstellt von Antje C. am 25/04/2015.
- Autor
- Antje C.
- Sprache
- English
- Aufrufe
- 0
- Schlagwörter
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz
Mehr zu LAN Security and Switch Hardening