Help shape GoConqr. What should we add next?

Quiz

Chapter 2 - Check Your Understanding

Antje C. 12 questions

Take the quiz

Questions in this quiz (12)

  1. 1Which three options correctly associate the command with the paired behavior? (Choose three)
    1. Aswitchport port-security violation protect: Frames with unknown source addresses are dropped and a notification is sent
    2. Bswitchport port-security violation restrict: Frames with unknown source addresses are dropped and no notification is sent
    3. Cswitchport port-security violation shutdown: Frames with unknown source addresses result in the port becoming error-disabled, and a notification is sent.
    4. Dswitchport port-security mac-address sticky: Allows dynamically learned MAC addresses to be stored in the running-configuration
    5. Eswitchport port-security maximum: Defines the number of MAC addresses associated with a port
  2. 2What is the effect of entering the following command on a Fast Ethernet switch port?
    SW1(config-if)#duplex full
    1. AThe connected device communicates in two directions, but only one direction at a time.
    2. BThe switch port returns to its default configuration.
    3. CIf the device connected to this port is also set for full duplex, the device participates in collision-free communication.
    4. DThe efficiency of this configuration is typically rated at 50 to 60 percent.
    5. EThe connected device should be configured as half duplex.
  3. 3Which two tasks does auto-negotiation in an Ethernet network accomplish? (Choose two)
    1. ASets the link speed
    2. BSets the IP address
    3. CSets the link duplex
    4. DSets MAC address assignments on switch ports
    5. ESets the ring speed
  4. 4Why should a default gateway be assigned to a switch?
    1. ASo that there can be remote connectivity to the switch via such programs as Telnet and ping.
    2. BSo that frames can be sent through the switch to the router.
    3. CSo that frames generated from workstations and destined for remote networks can pass to a higher level.
    4. DSo that other networks can be accessed from the command prompt of the switch.
  5. 5The network administrator wants to configure an IP address on a Cisco switch. How does the network administrator assign the IP address?
    1. AIn privileged EXEC mode
    2. BOn the switch interface FastEthernet0/0
    3. COn the management VLAN
    4. DOn the physical interface connected to the router or next-hop device
  6. 6Which option correctly associates the L2 security attack with the description?
    1. AMAC address flooding: Broadcast requests for IP addresses with spoofed MAC addresses
    2. BDHCP starvation: Using proprietary Cisco protocols to gain information about a switch
    3. CCDP attack: the attacker fills the switch MAC address table with invalid MAC addresses
    4. DTelnet attack: Using brute force password attacks to gain access to a switch
  7. 7What is an advantage of using SSH over Telnet when remotely connecting to a switch?
    1. AEncryption
    2. BMore connection lines
    3. CConnection-oriented services
    4. DUsername and password authentication
  8. 8Consider the configuration. Which two commands are not needed on the switch in order for a remote network administrator to access the switch using SSH?
    1. ASwitch(config)# ip domain-name mydomain.com
    2. BSwitch(config)# crypto key generate rsa
    3. CSwitch(config)# ip ssh version 2
    4. DSwitch(config)# line vty 0 15
    5. ESwitch(config-if)# transport input ssh
  9. 9What is an advantage of having the correct date and time on a network device?
    1. ANetwork administrators are provided with correct timestamps on log messages.
    2. BWhen working at the console prompt, the network administrator has a good idea how long the configuration or troubleshooting process is taking.
    3. COther devices can use CDP to discover neighbor device information if the time and date are synchronized between the two devices.
    4. DSecure remote connectivity can be accomplished if the date and time are accurate.
  10. 10What is the purpose of DHCP snooping?
    1. AEnsures devices are configured for automatic IP address assignment
    2. BPrevents unauthorized DHCP servers
    3. CPrevents DHCP messages fro going across the trunk
    4. DPrevents DHCP messages from being sent to another network

Information

Description
College Cisco Networking (ITCC1404: Chapter Quizzes) Quiz on Chapter 2 - Check Your Understanding, created by Antje C. on 25/04/2015.
Author
Antje C.
Language
English
Views
0
Tags
cisco networkingitcc1404: chapter quizzescollege
Rating
No ratings yet
Rate this quiz
Rate this quiz

More on LAN Security and Switch Hardening

Feedback

What is it about?

What should we add next?