Quiz
Quiz Pega Lead System Architect 8.5V
Erstelle ein kostenloses Konto, um dieses Quiz zu beenden
Speichere deinen Fortschritt und sieh dir dein Endergebnis an.
oder mit deiner E-Mail registrieren
Schon ein Konto? Anmelden
Fragen in diesem Quiz (111)
1What are the are two main goals of the Lead System Architect mission? (Choose Two)
- AIdentify design options for particular situations
- BEvaluate identified design options to form a recommended solution
- CLearn how asynchronous integration works
- DSolidify techniques for advanced rule configuration
2Which five of the following options should you consider when recommending a design solution? (Choose Five)
- ADeployment
- BEffort (cost)
- CComplexity (which indirectly impact effort and maintenance)
- DMaintenance
- EResource management (memory/database)
- FUser experience/responsiveness
3Why would you use PDC or AES when the organization already has application performance monitoring tools in place?
- APDC and AES show insights into the health of the Pega application.
- BPDC and AES collect alerts and health activity across Pega nodes.
- CPDC and AES provide the ability to stop and start agents, listeners, and manage requestors.
- DPDC and AES are available both on premise and in the Pega Cloud.
4To automate work in the center-out business architecture, _______________ is needed.
- ACase management
- BRobotic Process Automation
- CBusiness process management
- DBusiness rules engine
5Which two business requirements impact how you deploy your application? (Choose Two)
- AYou have requirements to support a business process outsourcing (BPO) model for your organization.
- BYou have requirements for case types to participate in a distributed architecture through microservices.
- CYou have requirements to start application development in Pega Cloud, and then move your application to an on-premise production environment.
- DYou have requirements to use message driven beans (MDB) to deliver messages from a system of record to the Pega application.
6When developing a new Pega application, start with _________________ and ___________________. (Choose Two)
- Aintegration to systems of record and work your way back into the Pega application
- Bthe Pega application in the middle and work your way out to channels and systems of record
- Cone application at a time and base your design on what you know today
- Dchannel design and work your way into the Pega application
7What is the primary reason for designing the security model as early as possible?
- ATo quickly address any warnings you see in the Rule Security Analyzer
- BTo begin penetration testing as early as possible
- CTo start your team on building access role, privileges, and attribute-based controls
- DTo ensure you account for and design to the organization security standards and legal requirements
8__________ allows users to quickly and easily define the data required to build the apps they need, and then access that data in their running application – all without having to worry about how and where the data is actually stored and accessed.
- AClipboard
- BLive Data
- CLive UI
- DApp Studio
9The primary benefit of using a Pega application is that it allows you to _______________________.
- Aintegrate with systems of record for lines of business more easily
- Bget to the minimum lovable product (MLP) faster
- Cutilize Pega's artificial intelligence (AI applications more effectively
- Dcompete with other industry-specific point solutions
10Pega's applications include ______________ and _______________. (Choose Two)
- Amarketing applications
- Bcustomer engagement applications
- Cindustry applications
- Dartificial intelligence applications
11Performing a ____________________ allows you to determine the differences between the features that the Pega application provides and your unique business requirements to support the delivery of the minimum loveable product (MLP).
- Asolution implementation gap analysis
- Bsprint review
- CDCO session
- Drequirements planning session
12What two benefits does App Studio provide? (Choose Two)
- AAn easy-to-use development environment designed for new users.
- BSupport for scenario testing.
- CQuick creation of enterprise assets.
- DRapid construction of new application concepts.
13What are two key initiatives to ensure the successful adoption of App Studio? (Choose Two)
- AEvaluate that applications are fit for the App Studio program.
- BEstablish a center of excellence (COE) for the organization.
- CStrive towards a decentralized project validation and approval model.
- DEnsure business users are technically self-sufficient before starting a project.
14Which of the following two options are best practices in App Studio? (Choose Two)
- ACreate reusable IT assets using App Studio.
- BShare business assets across applications.
- CManage reusable assets through a center of excellence (COE).
- DAvoid App Studio for DCO session.
15Which three types of records can be marked as relevant records? (Choose Three)
- AActivities
- BHarnesses
- CProperties
- DProcesses
16Which statement is true when comparing subcases and sub-flows?
- ASubcases are always preferred over sub-flows.
- BSubcases perform better than sub-flows.
- CLocking consequences can be ignored with sub-flows.
- DSubcases offer more security options than sub-flows.
17Which two of the following statements are advantages of using a single case over subcase designs? (Choose Two)
- ASubflows can be processed without interruption.
- BYou can make use of dependency management between subflows.
- CAll attachments are readily accessible.
- DNo replication of data is necessary with a single case.
18Which two of the following situations require that the AllCoveredResolved ticket is required in conjunction with the wait shape? (Choose Two)
- AWhen different types of subcases are involved.
- BWhen any of the covered subcases are resolved.
- CWhen the wait shape is configured as a timer with a duration shorter than the duration in which the ticket would be issued.
- DWhen the wait shape is configured as a timer with a duration longer than the duration in which the ticket would be issued.
19A case can enter the Create stage only _________________________________.
- Atwice
- Bas many times as there are processes defined in the Create stage
- Cas many times as there are stages defined in the case life cycle
- Donce
20Case processing can be performed by which three of the following requestor types? (Choose Three)
- APortal
- BBrowser
- CBatch
- DApp
21Which two of the following terms are associated with the term "component"? (Choose Two)
- ARecursive
- BInterface
- CRuleset
- DFramework
22Which two of the following design approaches are most closely related to the concept of application layering? (Choose Two)
- ALiskov Substitution
- BOpen-closed principle
- CTemplate design pattern
- DPolymorphism
23A ruleset override application can be used for which purpose?
- AFor aggregating multiple built-on applications into a single application.
- BAs a repository for Dependency inversion-based rules.
- CFor creating the first implementation application built on a framework application
- DFor defining applications specific to a division within an enterprise.
24Which two options are valid reasons for initially creating a single application? (Choose Two)
- AThe development of component applications takes more time because each application has to be tested individually.
- BThe application is specific to a single government agency.
- CAvoid the development of two application layers simultaneously.
- DThe concept of multiple built-on component applications has not been promoted in the past.
25Which three of the following approaches are valid ways of extending rules in Pega Platform? (Choose Three)
- AOrganization hierarchy
- BCircumstance
- CDynamic class referencing (DCR)
- DClass
- ERuleset
26It is a good practice to include case types in a component.
- ARichtig
- BFalsch
27How do you create a deployment package file for a component? (Choose two)
- AOn the component documentation tab, use the options in the Installation section.
- BUse Rule-Admin-Product
- COn the component definition tab, use Package Component
- DUse Export from ruleset version.
28Which one of the following object-oriented programming principles is followed by Pega component applications?
- ASingle Responsibility
- BInterface Segregation
- COpen/Closed
- DLiskov Substitution
29Which one of the following specialization techniques is best suited for localization of Pega applications?
- ACircumstances
- BOrganization hierarchy
- CRulesets
- DClasses
30Which three of the following features are available in a built-on application and are not available in a component? (Choose Three)
- APega Exchange publishing
- BSelf-testable
- CExtendable case types
- DIntegration rules
- EPegaUnit test creation
31Which two of the following options are key responsibilities of a Center of Excellence (COE)? (Choose Two)
- AProvide support to the lead system architect (LSA) on the project
- BLead application development efforts
- CManage and promote reusable assets
- DIdentify new opportunities in the organization
32Which two statements are true regarding rule names? (Choose Two)
- AApp Studio generates names for rules
- BCase type class names must exactly reflect their user population otherwise developer productivity may suffer
- CRefactoring class names is a time-consuming process
- DAll foundation classes must contain FW
33Which two statements are true when subdividing an existing user population into two distinct applications? (Choose Two)
- ACloning the existing database is desirable
- BReporting and security is simplified
- CResolved cases can be duplicated during migration
- DUser/account data can be gradually migrated
34What are two benefits of using a completely new database for a new user population? (Choose Two)
- ANo need exists to use class specialization
- BAssignments and attachments can be saved to different tables
- CMultitenancy can be avoided
- DThe same table names can be used in both databases
35Which three of the following options make up the data modeling three-level approach? (Choose Three)
- AFlexible
- BExtensible
- CPhysical
- DLogical
- EConceptual
36Which of the following are considered while designing a data model?
- AOrganizing the data
- BPerforming action on the data
- CManaging the data storage
- DArchiving the data
37Which two of the following options are ways to version data? (Choose Two)
- AAdd a property such as an as-of date or monotonically increasing version. Filter based on values.
- BDefine a custom rule.
- CWhen deploying data, remove existing instances first.
- DDefine report definitions with subreports that filter on MAX pxUpdateTime.
38A dependency tree has which characteristic?
- ACircular references are not allowed within a level.
- BThe number of items in a level tends to decrease as the level increases.
- CA level can only reference the previous level.
- DLayers are synonymous with unique contiguous sets of levels.
39Which two hierarchy types are applicable to object-oriented programing inheritance? (Choose Two)
- ASubsumptive
- BCompositional
- CProgrammatic
- DLayer-based
40In which of the following situations is data locking required?
- AWhen ensuring integrity of a custom queue table.
- BWhen a case property uses the Data Page Snapshot pattern.
- CWhen the allow locking check-box is checked within a data class rule and an instance of the data class is opened.
- DWhen initially saving a record to a custom queue table.
41A enterprise-level data class has multiple instances that can be selected from a data page sourced repeating grid. The class and ruleset in which the class is defined needs to include a data transform that adds an instance to a list. For extensibility, which two of the following could be implemented? (Choose Two)
- AA Lookup data page that returns the class of the page according to the application that adds to the list.
- BA Lookup data page that returns the name of page to use when appending to .pxResults().
- CCreate a class with -Extension appended to the data class name. Save the data transform to that class.
- DProvide a uniquely-named, embedded-list property applied to @baseclass that collects the same class.
42To accommodate changes to integration rules, a lead system architect (LSA) should do what two things? (Choose Two)
- ASpecify a new integration base class when using a wizard by using dynamic class referencing (DCR) to get the class name at run time.
- BVersion the application when certain integration rulesets become obsolete.
- CDevelop custom rules to encapsulate the integration data model thereby the complexity of versioning.
- DCreate new ruleset versions using the existing integration base class.
43During GetNextWork, if Get from work queues first is not selected in a operator record, the Work-.findAssignmentInWorkbasket activity is invoked followed by the Work-.findAssignmentInWorklist activity.
- ARichtig
- BFalsch
44What is the primary difference between push routing and pull routing?
- APush routing activity names begin with To and pull routing activity names begin with either Get or Find.
- BThe security type value for push routing activities is Route, and the security type value for pull routing activities is Activity.
- CThe behavior of push routing is configured in Rule-System-Settings, and pull routing is not.
- DPush routing is initiated during the context of case processing, and pull routing is initiated outside the context of case processing.
45The Work Parties rule directly facilitates routing decisions when accessed in which two configurations? (Choose Two)
- ADuring Get Next Work to validate whether the operator's primary access role corresponds to a party role
- BWhen validating which work party roles are allowed to be used and their cardinality
- CWhen organization routing activities are called, such as ToWorkGroupManager
- DWhen a work party is populated immediately after case instantiation
46Choose two ways to customize Get Next Work for a particular type of actor or primary role. (Choose Two)
- ADefine a workgroup-specific variation for each distinct workbasket purpose. Operator records specify workbaskets that correspond to their workgroup.
- BDefine skill names specific to each workgroup. Set skills on each workbasket assignment according to the workgroup to which the workbasket is associated.
- COverride certain Get Next Work activities to react differently according to the operator's work group.
- DCircumstance Get Next Work rules based on a text fragment derived from the operator's primary access group.
47Which two configuration approaches differentiate Get Next Work behavior for different actors without modifying Get Next Work related rules? (Choose Two)
- AList workbaskets in a specific order on operator records
- BIncrease case urgency prior to a workbasket assignment.
- COverride one or more GetNextWork-related Application Settings rules.
- DImplement a button that actions open assignment, the key for which is supplied by a data page.
48Which one of the following flows are called for general process configuration error?
- ApzStageProblems
- BProblemFlow
- CFlowProblems
- DConnectionProblem
49Which of the following options is usually the best approach to safely change flows in production?
- ACreate a new circumstanced flow and leave the old flow intact to support outdated assignments
- BUse tickets, change stage, or restart the current stage to process old assignments for removal before applying changes
- CRevert the user’s application version when processing older assignments.
- DThe best approach to use depends on the nature of the application.
50Which assignment property is not critical in terms of flow processing?
- ApyInterestPageClass — The class of the flow rule
- BpyFlowType — The name of the flow rule
- CpxTaskName — The shape ID of the assignment shape
- DpxTaskLabel — The label given to the assignment task
51Which shape is least likely to cause a problem when removed from a flow already in production?
- ASplit-For-Each
- BSubflow
- CDecision
- DAssignment
52Select the two true statements regarding background processing. (Choose Two)
- AParallel flows are an example of leveraging background processing.
- BLocking effects are negated with background processing.
- CThe Connect-Wait method is used to test if background processing for connectors complete.
- DBackground processing involves separate requestors.
53Which of the following statements is true regarding service-level agreements (SLAs) and Wait shapes?
- AWait shape escalation activity can advance the case in a flow.
- BWait shapes completely replace SLA functionality.
- CAn SLA can be used to replace a custom agent in some situations.
- DAn SLA is a special type of advanced agent.
54Select the true statement regarding agents.
- AAn advanced agent should be enabled on only a single node in a multinode system.
- BCommits must be issued in advanced agents activities.
- CIn a multinode system, standard agents are always preferred.
- DAn advanced agent cannot be used to process a queue.
55What are the three security levels in application security? (Choose Three)
- AData in archive
- BData at rest
- CData in transit
- DData at sleep
- EData at display
56How do you identify security vulnerabilities in the custom code written by the project team in a Pega application?
- AReview the PegaRULES log file
- BRun the Rule Security Analyzer tool
- CRun the App Studio Compliance tool
- DRun the Access Manager tool
57Where do you configure authentication timeout in Pega?
- Aprlogging.xml
- BAdvanced tab of the access group
- Cprconfig.xml
- Dweb.xml
58Enabling audit tracking on each property used in the application does not impact the performance of the application.
- ARichtig
- BFalsch
59The goal of security is to maintain three witch of the following options? (Choose Three
- AIntegrity
- BExtensibility
- CMaintainability
- DConfidentiality
- EAvailability
60For which two types of rule can the authentication profile be configured in Pega? (Choose Two)
- AFlows
- BActivities
- CServices
- DConnectors
61What is the default Authentication type in the Pega Platform?
- AJava
- BPRSecuredBasic
- CBasic Credentials
- DCustom
62What three kinds of security issues can be detected if you monitor PegaRULES-ALERTSECURITY.log file? (Choose Three)
- AAuthorized data access
- BCross-site request forgery (CSRF) attacks
- CUser successful login information
- DAccess to a restricted activity, stream, or report
- EContent Security Policy violations
63In which four of the following rule types can you configure privileges? (Choose Four)
- AAttachment category rules
- BFlows
- CCorrespondence
- DParse structured rules
- ERule utility functions
- FReport definitions
- GData pages
64What are the three benefits of using dependent role hierarchies? (Choose Three)
- AIncreases complexity with multiple access roles
- BReuse Pega application authorization
- CAccess role layering
- DEliiminates duplication of Access of Role to Objects (AROs) for application-specific access roles
- ENo dependency if more than one access role configured
65When do you set the Rule security mode on the access group to Warn?
- AWhen verifying that the access role is configured correctly for rule execution.
- BWhen displaying a custom warn message if rule execution failed.
- CWhen automatically notifying the system administrator when access is denied to a rule.
- DWhen writing a message in the log file if attribute-based access control (ABAC) overrode the role-based access control (RBAC) setting.
66You have an access group with two access roles with conflicting access privileges. Which two configuration options are recommended to ensure that access is denied? (Choose Two)
- AUse attribute-based access control (ABAC) to restrict access.
- BUse an Access Deny to explicitly restrict access.
- CCreate a single role restricting access.
- DModify the role that is granting access.
67You want a group of users to view certain properties in a case without being able to open the case. How do you implement the requirement?
- AAttribute-based access control Discover action
- BAttribute-based access control Property Read action
- CRole-based access control privilege
- DRole-based access control Read action
68When is access granted if both role-based access control (RBAC) and attribute-based access control (ABAC) are configured in an application?
- AAccess is granted when ABAC evaluates to true as it overrides RBAC.
- BAccess is granted when RBAC evaluates to true as it overrides ABAC.
- CAccess is only granted if both RBAC and ABAC evaluate to true.
- DAccess is granted if ABAC evaluates to true unless an Access Deny restricts access.
69Whose primary responsibility to monitor and address security alerts and events in an application?
- ALead System Architect
- BSecurity Administrator
- CCitizen developer
- DSenior System Architect
70Content security policies help to detect and protect what two types of security threats or attacks for your application? (Choose Two)
- ACross-Site Scripting (XSS)
- BSession hijacking
- CData injection attacks
- DBroken authentication
71Select two of the content security policies that come with Pega Platform by default (Choose Two)
- ApxDefaultSecuredAll
- BpxDefaultAllowAll
- CpxDefaultDenyAll
- DpxDefaultSecured
72The rule security mode (RSM) Utility is used for ________________________ and ____________________. (Choose Two)
- Asetting role privileges manually by creating privileges
- Bensuring that users do not have unauthorized access to applications
- Censuring that users have authorized access to applications
- Dsetting role privileges automatically by creating “implicit” privileges
73Content security policies ______________ and ________________. (Choose Two)
- Afind common vulnerabilities by searching for matches to regular expressions
- Bcreate an event when security relevant rules are updated
- Chelp detect and mitigate Cross Site Scripting (XSS) and data injection attacks
- Dprotect your browser from loading and running content from untrusted sources
74Which two of the following security risks can be identified by the Rule security analyzer? (Choose Two)
- AHand-crafted Java code
- BProperties with an incorrect type
- CUnsecured rulesets and unlocked ruleset versions
- DVulnerabilities in stream rules
75When implementing a security requirement, it is important to _____________________ and _____________________. (Choose Two)
- Aunderstand vulnerabilities inherent in the application programming language and underlying platform.
- Bconsider the cost for the users.
- Conly change default settings if absolutely necessary.
- Dconsider if the requirement can be implemented using ABAC instead of RBAC.
76What two benefits do you gain by leveraging a data warehouse coupled with Pega reporting? (Choose Two)
- AYou can focus on using Pega Reporting for reporting on throughput data or cases in flight.
- BYou can purge cases from your database along with the data warehousing process.
- CYou can use BIX to export cases to a database, a comma-separated file, or XML format.
- DYou can use reporting tools suited for trending and data analysis.
77Your organization uses a large number of business intelligence (BI) reports. Which two approaches would you consider to be good solutions? (Choose Two)
- AElasticsearch
- BBIX
- CData warehouse
- DData Archive
78Which two of the following actions do you perform when you begin developing your reporting strategy? (Choose Two)
- ACreate a matrix categorizing the user roles and reports each role uses to make business decisions
- BInventory the reports the organization currently uses
- COptimize the properties in all the reports
- DInstall the BIX product
79What database tuning technique do you use to determine if the database is taking the most efficient route to return results?
- ACreate table indexes
- BRun explain plans on your queries
- CPerform a load test
- DPartition the database tables
80You have created a set of reports that use large numbers of embedded properties. Which of the following techniques do you use to help improve report performance?
- AInclude all rows when joining reports
- BCreate declare indexes
- CEnable pagination
- DRun reports against a reports database
81Your application server is experiencing out-of-memory (OOM) errors. You suspect that the issue is related to a new report you recently put into production. Which of the following options is the likeliest reason that the report is causing these OOM issues?
- AComplex SQL requests
- BLarge result sets
- CHeavy network traffic
- DUnoptimized properties
82XYZ Corp. sends a survey to its customers with responses such as Poor, Fair, Good, Very Good, Exceptional. XYZ would like to see this information graphed numerically where Poor = 5, Fair = 4, Good = 3, Very Good = 2, and Excellent = 1, those values being summed, not counted. The resulting sum should then be averaged over the number of questions in the survey. XYZ’s goal is to lower the disatisfied customer averaged score as low as possible. Which of the following approaches should be used as part of the solution?
- ADefine an SQL Function that returns a number 1-5. In subreport A, apply the “Sum” Summarize option to the output of that SQL Function. In subreport B, use the “Count” Summarize option to obtain the number of rows queried by subreport A. In the main report, divide() subreport’s A’s sum by subreport B’s count.
- BDefine an SQL Function that returns a number 1-5. Apply the “Average” Summarize option to the output of that SQL Function.
- CDefine an Activity that uses Obj-Browse. Loop the result. In the loop adding to running total using When/Otherwise When/Otherwise conditions. Divide that total by param.pyForEachCount to obtain the average.
- DDefine SQL Functions such as Poor() or Fair(). Each Function returns a number 1-5 when matching the response otherwise 0. In subreport A, apply the “sum” Summarize option to each column then use the Add() Function to add those sums. In the main report, divide() subreport A’s total by the count of the rows queried by subreport A queried, that count obtained by subreport
83Multiple case types within the Booking application’s case hierarchy can produce FSG-Data-Pricing records, BookEvent and VehicleParking, for example. To generate a customer’s invoice, the Booking team needs to collect every Pricing record related to a given BookEvent case. Which of the following approaches should be used as part of solution?
- ADefine an FSG-Booking-Work-BookEvent Report Definition that defines a JOIN to FSG-Booking-Work-BookEvent aliased as “CHILD”. The JOIN compares pyOrigOrg values. The Query tab’s filter condition compares CHILD.pzInsKey to the pxCoveredInsKeys ValueList which generates an ((A = B) or (A = C) or…) clause.
- BDefine an SQL Function named isInCaseHierachy() that takes two parameters, one being the passed-in pyID of the parent case, the other being the Reference property within the FSG-Data-Pricing record Pricing record.
- CDefine an FSG-Booking-Work subreport that uses Do Not JOIN rows. The main FSG-Booking-Work-BookEvent Report Definition declares a ParentKey parameter which is passed to the subreport. The subreport filters on pxCoveredInsKey = param.ParentKey. Main report filters on pzInsKey = SUBRPT.pxCoveredInsKey which generates an IN clause. The main report OR’s that filter with pzInsKey = param.ParentKey
- DDefine an FSG-Booking-Data-CaseHierarchy class. Within each row of that class, both the pyID of the BookEvent case and the pyID of a BookEvent child case are persisted. That generated table is joined to FSG-Data-Pricing’s Reference property.
84What are two ways to define a trend report with a chart that shows the number of cases completed each day as well as the number of cases resolved each day? (Choose Two)
- AUse a series of sub-reports
- BUse Complex SQL requests
- CDefine and report against a Timeline table
- DDefine and reports against history table
85Select the true statement about Jakob Nielsen's eight stages of UX maturity.
- AIf a company invests enough in UX, it is possible to skip a stage of UX maturity.
- BTeams should always rely on their intuition to create user-centered software.
- CAn important part of the systematic user-centered design process is using user research earlier in the software development life cycle.
- DIntegrated user-centered design, or systemic tracking of UX quality, is the end goal for any organization going through the eight stages of UX maturity
86What is the term for the set of interactions a customer has from the beginning to the end of their relationship with the company?
- AUser-driven corporation
- BEnd-to-end experience
- CFront- and back-end handoff
- DMulti-channel
87How can a business emphasis on UX break down silos in a company?
- ABetter B2E UX builds on familiar experiences for employees.
- BBetter UX allows front- and back-end developers to operate independently in their area of expertise.
- CBetter end-to-end experiences can drive collaboration between teams.
- DBetter UX requires the creation of new design teams.
- EBetter B2E UX allows employees to focus on a single task or application.
88Which of the following is NOT a direct advantage of investing in B2E UX?
- ABetter B2E UX helps groups within the company work better together.
- BBetter B2E UX can help the company's brand.
- CBetter B2E UX helps companies scale.
- DBetter B2E UX will save companies time and money.
- EBetter B2E UX means companies must hire more designers.
89B2E applications are self-service applications built for customers.
- ARichtig
- BFalsch
90What are four critical characteristics of a successful UX design? (Choose Four)
- AUser-centric
- BIndependent
- CSolves a user or business problem
- DDeveloper-driven
- EEngaging
- FEmpathetic
- GSympathetic
- HSpontaneous
91Which three of the following options are reasons for companies to invest in UX design? (Choose Three)
- AStudies show that good design leads to more profits for companies.
- BUX design is a key component of client and user satisfaction.
- CThe UX design process begets effective cross-functional collaboration.
- DUX design eliminates the iterative process in software development
92Which of the following terms refers to the total experience of a user, whether intended or not?
- AUI
- BAI
- CUX
- DIT
93Which two techniques can improve performance and the related user experience? (Choose Two)
- AMaximize server-side Processing
- BUse single page dynamic containers
- CMinimize client-side expressions
- DUse the Optimized code option for layout mode in dynamic layouts
94Which two Pega features can help improve the user experience? (Choose Two)
- ARepeating dynamic layouts
- BPanel sets
- CLayout groups
- DSmart layouts
95Which two processing options can help improve the user experience? (Choose Two)
- ARun processes synchronously
- BUse deferred data loading
- CRun connectors in parallel
- DAvoid requeuing failed responses
96To leverage cosmos UI design, your application must have Theme-Cosmos application in the application stack.
- ARichtig
- BFalsch
97Which three of the following options are the different parts of a case in a Cosmos-themed user portal? (Choose Three)
- AMedia
- BSummary panel
- CMarketplace
- DUtility Panel
- EActivity area
98What are the last three stages of usability testing? (Choose Three)
- AConduct testing
- BSelect participants
- CSelect the testing location
- DCompile feedback
99Select two reasons why usability testing is important. (Choose Two).
- AUsability testing is done after the application is deployed to production and is used to compute a net promoter score
- BUsability testing validates the ease of use of the user interface design
- CUsability testing is done to collect valuable design data
- DUsability testing allows project managers to subjectively define the applications usability
100Which three of the following steps are part of usability testing? (Choose Three)
Putting together a list of tasks that needs to be tested.- APutting together a list of tasks that needs to be tested.
- BLocking the ruleset before usability testing.
- CDocumenting the recommendations needed to fix the issue.
- DIdentifying the users of the application.
101What is the correct sequence for DevOps release pipeline?
- ADevelopment -> Continuous Integration -> Continuous Delivery -> Deployment
- BContinuous Integration -> Deployment-> Continuous Delivery -> Development
- CContinuous Delivery -> Deployment-> Continuous Integration ->Development
- DDeployment -> Continuous Delivery -> Continuous Integration -> Development
102When defining a release management strategy, what is your primary objective?
- ACreate a repeatable and sustainable process for ensuring business value is delivered safely and as quickly as possible to end users.
- BImplement a process for developers to minimize rule conflicts when merging into a central repository.
- CMove the organization to a continuous integration/continuous deployment (CI/CD) model.
- DIntroduce automated testing into the organization.
103In which stage of the DevOps release pipeline is acceptance testing performed?
- ADeployment
- BContinuous delivery
- CContinuous integration
- DDevelopment
104When does the developer trigger a rebase?
- ADirectly after a branch is published to the system of record
- BWhen there are no merge conflicts for the branch
- CWhen a branch has been successfully merged in the system of record
- DWhen the unit tests have been executed successfully for a branch
105Which three of the following components are needed to support a DevOps release pipeline? (Choose Three)
- AAutomation server
- BSystem of record
- CEnterprise service bus
- DApplication repository
- EVirtual server
106It is a best practice to suppress rule warnings to improve your application guardrail compliance score.
- ARichtig
- BFalsch
107Which of the following test type is most expensive to run in a Test pyramid of test automation?
- AAPI-based functional tests
- BPerformance testing
- CUI-based functional and scenario tests
- DUnit testing
108What two things happen if the standard rule check-in approval process is enabled when a rule is checked in? (Choose Two)
- AA work item is created.
- BThe rule is routed to an approver.
- CThe rule is moved to a candidate ruleset.
- DA notification is sent to the approver.
109Which type of testing is UI-based?
- AAPI testing
- BScenario testing
- CUnit testing
- DFunctional testing
110In which of the following situations would you override the ShowWarningOnForm decision tree?
- ATo display a custom guardrail warning
- BTo filter guardrail warnings displayed on the rule form
- CTo define the criteria for adding custom guardrail warning
- DTo invoke the pxAddGuardrailMessage function
111Which two of the following tools are useful when assessing the quality of an application? (Choose Two)
- ABIX
- BADMIN Studio
- CPegaRULES Log Analyzer (PLA)
- DAutonomic Event Services (AES)
Informationen
- Beschreibung
- Information Technology Quiz am Quiz Pega Lead System Architect 8.5V, erstellt von Leon Souza am 28/10/2021.
- Autor
- Leon Souza
- Sprache
- English
- Aufrufe
- 229
- Schlagwörter
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz