Gestalte GoConqr mit. Was sollen wir als Nächstes hinzufügen?

Quiz

QENKA - Chapter 4 - IP Services

Vlad 100 Fragen

Quiz starten

Fragen in diesem Quiz (100)

  1. 1Which method will allow you to use RFC 1918 addresses for Internet requests?
    1. ACIDR
    2. BClassful addressing
    3. CNAT
    4. DVPN
  2. 2In the following exhibit, what is the inside local IP address?Bild zu Frage 2
    1. A192.168.1.2 Host A
    2. B192.168.1.1 Router A Gi0/0
    3. C179.43.44.1 Router A S0/0
    4. D198.23.53.3 web server
  3. 3In the following exhibit, what is the inside global IP address?Bild zu Frage 3
    1. A192.168.1.2 Host A
    2. B192.168.1.1 Router A Gi0/0
    3. C179.43.44.1 Router A S0/0
    4. D198.23.53.3 web server
  4. 4In the following exhibit, what is the outside global IP address?Bild zu Frage 4
    1. A192.168.1.2 Host A
    2. B192.168.1.1 Router A Gi0/0
    3. C179.43.44.1 Router A S0/0
    4. D198.23.53.3 web server
  5. 5Which command will allow you to view the NAT translations active on the router?
    1. ARouter#show ip nat translations
    2. BRouter#show nat translations
    3. CRouter#debug ip nat translations
    4. DRouter#show translations nat
  6. 6Which command will display an overview of the current number of active NAT translations on the router, as well as other overview information?
    1. ARouter#show ip nat translations
    2. BRouter#show ip nat summary
    3. CRouter#show ip nat status
    4. DRouter#show ip nat statistics
  7. 7In the following exhibit, which command will configure static NAT for the internal web server?Bild zu Frage 7
    1. ARouterA(config)#ip nat inside source static 192.168.1.3 179.43.44.1
    2. BRouterA(config)#nat source static 192.168.1.3 179.43.44.1
    3. CRouterA(config)#ip nat static 192.168.1.3 179.43.44.1
    4. DRouterA(config)#ip nat source static 192.168.1.3 179.43.44.1
  8. 8In the following exhibit, the enterprise owns the address block of 179.43.44.0/28. Which command will create a NAT pool for Dynamic NAT?Bild zu Frage 8
    1. ARouterA(config)#ip nat pool EntPool 179.43.44.0/28
    2. BRouterA(config)#ip pool EntPool 179.43.44.2 179.43.44.15netmask 255.255.255.0
    3. CRouterA(config)#ip nat pool EntPool 179.43.44.1 179.43.44.15netmask 255.255.255.240
    4. DRouterA(config)#ip nat pool EntPool 179.43.44.2 179.43.44.15netmask 255.255.255.0
  9. 9When configuring dynamic NAT, why must you configure an access list?
    1. AThe access list allows incoming access from outside global addresses.
    2. BThe access list allows outgoing access from inside local addresses.
    3. CThe access list allows outgoing access from outside local addresses.
    4. DThe access list allows outgoing access from inside global addresses.
  10. 10Which command will wipe out all current NAT translations in the NAT table?
    1. ARouter#no ip nat translation
    2. BRouter#clear ip nat translation
    3. CRouter#clear ip nat translation *
    4. DRouter#clear ip nat

Informationen

Beschreibung
- CCNA Quiz am QENKA - Chapter 4 - IP Services, erstellt von Vlad Vlad am 09/09/2020.
Sprache
English
Aufrufe
23
Schlagwörter
ccna-
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Mehr zu IP Addressing, IPv4 and IPv6

Feedback

Worum geht es?

Was sollen wir als Nächstes hinzufügen?