Gestalte GoConqr mit. Was sollen wir als Nächstes hinzufügen?

Quiz

Pulleys and belts: power transmission and belt drives

Iker Diaz Bravo 20 Fragen

Quiz starten

Dieses Quiz enthält Fragetypen, die sich im gewohnten Player öffnen.

Fragen in diesem Quiz (20)

  1. 1 Illustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys dont rotate in the same direction.

    Bild zu Frage 1
    1. ARichtig
    2. BFalsch
  2. 2.Differs from in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed?Bild zu Frage 2
    1. AYes
    2. Bnot
    3. CWe dont know?
  3. 33. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are [blank_start]two[blank_end] of these pulleys, side by side, one for each leaf of the belt.

    Bild zu Frage 3
    1. Amethod
    2. Btwo
  4. 44. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another whose axis is in the same plane. This is shown with a crossed belt. An open belt may be used, but the crossed one is preferable, as it gives more surface of [blank_start]contact[blank_end].

    Bild zu Frage 4
    1. Amethod
    2. BForm
    3. Ccontact
    4. Dtransmition
  5. 54. A method of transmitting ________ from a shaft at right angles to another whose axis is in the same plane.Bild zu Frage 5
    1. Arotation
    2. Bmovation
  6. 66. By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

    Chose the correct image
    1. ABild zu Antwort A
    2. BBild zu Antwort B
    3. CBild zu Antwort C
  7. 7it is made by pulleys?Bild zu Frage 7
    1. ARichtig
    2. BFalsch
  8. 8A method of engaging, disengaging, and reversing the upright shaft at the left. The belt is shown on the middle one of the three pulleys on the lower shafts, a, b, which pulley is loose, and consequently no movement is communicated to the said shafts. When the belt is traversed on the left-hand pulley, which is fast on the hollow shaft, b, carrying the bevel-gear, B, motion is communicated in one direction to the upright shaft; and on its being traversed on to the right-hand pulley, motion is transmitted through the gear, A, fast on the shaft, a, which runs inside of b, and the direction of the upright shaft is reversed.
    chose the correct image to the definition
    1. ABild zu Antwort A
    2. BBild zu Antwort B
  9. 9chose the correct immage acorrding the definiton
    Speed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.

    1. ABild zu Antwort A
    2. BBild zu Antwort B
  10. 10Cone-pulleys for the same purpose as 10. This motion is used in cotton machinery, and in all machines which are required to run with a gradually increased or diminished speed.

    1. ARichtig
    2. BFalsch

Informationen

Beschreibung
Quiz am Ohne Titel, erstellt von Iker Diaz Bravo am 29/10/2021.
Sprache
Español
Aufrufe
11
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Mehr zu Gears, Pulleys and Belt Drives

Feedback

Worum geht es?

Was sollen wir als Nächstes hinzufügen?