Help shape GoConqr. What should we add next?

Quiz

Pulleys and belts: power transmission and belt drives

Iker Diaz Bravo 20 questions

Take the quiz

This quiz has question types that open in the usual player.

Questions in this quiz (20)

  1. 1 Illustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys dont rotate in the same direction.

    Image for question 1
    1. ATrue
    2. BFalse
  2. 2.Differs from in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed?Image for question 2
    1. AYes
    2. Bnot
    3. CWe dont know?
  3. 33. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are [blank_start]two[blank_end] of these pulleys, side by side, one for each leaf of the belt.

    Image for question 3
    1. Amethod
    2. Btwo
  4. 44. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another whose axis is in the same plane. This is shown with a crossed belt. An open belt may be used, but the crossed one is preferable, as it gives more surface of [blank_start]contact[blank_end].

    Image for question 4
    1. Amethod
    2. BForm
    3. Ccontact
    4. Dtransmition
  5. 54. A method of transmitting ________ from a shaft at right angles to another whose axis is in the same plane.Image for question 5
    1. Arotation
    2. Bmovation
  6. 66. By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

    Chose the correct image
    1. AImage for option A
    2. BImage for option B
    3. CImage for option C
  7. 7it is made by pulleys?Image for question 7
    1. ATrue
    2. BFalse
  8. 8A method of engaging, disengaging, and reversing the upright shaft at the left. The belt is shown on the middle one of the three pulleys on the lower shafts, a, b, which pulley is loose, and consequently no movement is communicated to the said shafts. When the belt is traversed on the left-hand pulley, which is fast on the hollow shaft, b, carrying the bevel-gear, B, motion is communicated in one direction to the upright shaft; and on its being traversed on to the right-hand pulley, motion is transmitted through the gear, A, fast on the shaft, a, which runs inside of b, and the direction of the upright shaft is reversed.
    chose the correct image to the definition
    1. AImage for option A
    2. BImage for option B
  9. 9chose the correct immage acorrding the definiton
    Speed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.

    1. AImage for option A
    2. BImage for option B
  10. 10Cone-pulleys for the same purpose as 10. This motion is used in cotton machinery, and in all machines which are required to run with a gradually increased or diminished speed.

    1. ATrue
    2. BFalse

Information

Description
Quiz on Untitled, created by Iker Diaz Bravo on 29/10/2021.
Language
Español
Views
11
Rating
No ratings yet
Rate this quiz
Rate this quiz

More on Gears, Pulleys and Belt Drives

Feedback

What is it about?

What should we add next?