GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Kostenlos registrieren

Quiz

Crystallography terms

Mary S 12 Fragen

Quiz starten

Dieses Quiz enthält Fragetypen, die sich im gewohnten Player öffnen.

Fragen in diesem Quiz (12)

  1. 1What makes good data?
    1. [blank_start]Rmerge[blank_end] = [blank_start]lower[blank_end] the better. This is how much [blank_start]measurements of the same reflection[blank_end] differ from the [blank_start]average intensity[blank_end] of [blank_start]that reflection[blank_end].
    Rmeas = same as R merge but [blank_start]independent[blank_end] of [blank_start]multiplicity[blank_end].

    2. I/sigma I = Signal to [blank_start]noise[blank_end] ratio. [blank_start]>2[blank_end] good, [blank_start]>1[blank_end] okay. [blank_start]Completeness[blank_end] = reports on missing data, aim for [blank_start]100[blank_end] %.

    Multiplicity = aim [blank_start]high[blank_end] [blank_start]> 3[blank_end]. No of [blank_start]unique reflections[blank_end].
    CC1/2 = [blank_start]close to 1[blank_end]. Correlation coefficient. If cc1/2 < 0.15, data is insignificant.
    1. ARmerge
    2. Blower
    3. Cmeasurements of the same reflection
    4. Daverage intensity
    5. Ethat reflection
    6. Findependent
    7. Gmultiplicity
    8. Hnoise
    9. I>2
    10. J>1
    11. KCompleteness
    12. L100
    13. Mhigh
    14. N> 3
    15. Ounique reflections
    16. Pclose to 1
  2. 2R [blank_start]work[blank_end] = measure of [blank_start]model errors[blank_end]/ relative [blank_start]discrepancy[blank_end] between [blank_start]experimentally[blank_end] observed structure factor [blank_start]amplitudes[blank_end] ([blank_start]Fhkl[blank_end]) and the ones calculated from the [blank_start]model[blank_end] ([blank_start]Fcalc[blank_end]).

    Combines error from experimental data + deviation of model from reality.
    1. Awork
    2. Bmodel errors
    3. Cdiscrepancy
    4. Dexperimentally
    5. Eamplitudes
    6. FFhkl
    7. Gmodel
    8. HFcalc
  3. 3R [blank_start]free[blank_end] = calculated like R work BU only uses approx [blank_start]1000 randomly selected reflections[blank_end] which never entered model [blank_start]refinement[blank_end]. It can highlight [blank_start]overfitting[blank_end] of data. It should be within [blank_start]7-10[blank_end] % of R work.
    1. Afree
    2. B1000 randomly selected reflections
    3. Crefinement
    4. Doverfitting
    5. E7-10
  4. 43 factors that dictate how diffracted X rays combine to form an image.
    1. [blank_start]Direction[blank_end] - given by [blank_start]Miller indices[blank_end] of [blank_start]crystal plane[blank_end]
    2. [blank_start]Amplitude[blank_end] - from [blank_start]measured intensity[blank_end] of the [blank_start]beam[blank_end]
    3. Phase - [blank_start]no way[blank_end] to observe aka phase problem
    Uses calculations to give str factors from approx arrangement of all or some atoms.
    1. ADirection
    2. BMiller indices
    3. Ccrystal plane
    4. Dmeasured intensity
    5. Ebeam
    6. Fno way
    7. GAmplitude
  5. 5Resolution = [blank_start]minimum[blank_end] [blank_start]spacing[blank_end] of crystal [blank_start]lattice planes[blank_end] that still give measurable [blank_start]diffraction[blank_end] of X-rays.
    The smaller d is, the more [blank_start]independent[blank_end] reflections are [blank_start]available[blank_end] to [blank_start]define[blank_end] the structure.
    1. Aminimum
    2. Bspacing
    3. Clattice planes
    4. Ddiffraction
    5. Eindependent
    6. Favailable
    7. Gdefine
  6. 6Space group = Describes a cell's [blank_start]internal symmetry[blank_end] elements.
    1. Ainternal symmetry
  7. 7[blank_start]Unit cell[blank_end] = smallest and simplest [blank_start]volume element[blank_end] that completely represents the [blank_start]whole crystal[blank_end].
    1. Avolume element
    2. Bwhole crystal
    3. CUnit cell
  8. 8Ramachandran plot = a space filling model of peptides used to [blank_start]visualise energetically possible[blank_end] and [blank_start]sterically permitted[blank_end] values of [blank_start]dihedral angles[blank_end] of polypeptide.
    Shows [blank_start]statistical distribution[blank_end] of the [blank_start]combinations of backbone dihedral[blank_end] angles.

    The allowed regions show which values of [blank_start]phi/psi angles[blank_end] are possible per aa.
    1. Avisualise energetically possible
    2. Bsterically permitted
    3. Cdihedral angles
    4. Dstatistical distribution
    5. Ecombinations of backbone dihedral
    6. Fphi/psi angles
  9. 9Friedel pair - equal [blank_start]amplitude[blank_end], opposite [blank_start]phase[blank_end]. [blank_start]Fhkl[blank_end].
    1. AFhkl
    2. Bamplitude
    3. Cphase
  10. 10[blank_start]CC 1/2[blank_end] = Pearson's correlation coefficient. Based on random division of [blank_start]complete[blank_end] set of [blank_start]reflections[blank_end] into 2 [blank_start]equal[blank_end] parts and calculating [blank_start]correlation[blank_end] between the [blank_start]intensity[blank_end] estimates of the 2. aka how well one half of the data [blank_start]predicts the other half[blank_end].
    1. ACC 1/2
    2. Bcomplete
    3. Creflections
    4. Dequal
    5. Ecorrelation
    6. Fintensity
    7. Gpredicts the other half

Informationen

Beschreibung
Science Quiz am Crystallography terms, erstellt von Mary S am 30/05/2024.
Autor
Mary S
Sprache
English
Aufrufe
0
Schlagwörter
science
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck