2154623
Descripción
Test por Freddy Bueno, actualizado hace más de 1 año
|
Creado por Freddy Bueno
hace alrededor de 9 años
|
|
Pregunta 1
Pregunta
Welding is a joining process that by definition requires the application of:
Respuesta
-
both heat and pressure
-
either heat or pressure
-
both heat and filler metal
-
both pressure and filler metal
-
all of the above
Pregunta 2
Pregunta
In arc welding, the electric arc is intensely hot with temperatures exceeding:
Respuesta
-
20,000 Degrees C
-
30,000 Degrees C
-
33,000 Degrees C
-
40,000 Degrees C
-
50,000 Degrees C
Pregunta 3
Pregunta
The most common gas used with gas shielded flux cored arc welding is:
Respuesta
-
Pure argon
-
Pure helium
-
75% Ar-25% CO2
-
Argon with 10% Hydrogen
Pregunta 4
Pregunta
The technique used for semi-automatic welding with gas shielded flux cored arc welding is:
Respuesta
-
Drag (backhand)
-
Push (forehand)
Pregunta 5
Pregunta
Welding equipment for gas shielded flux cored arc welding is essentially the same as for gas metal arc welding.
Respuesta
- True
- False
Pregunta 6
Pregunta
Gas shielded flux cored wires with basic ingredients in the core are ideally suited for out-of-position welding
Respuesta
- True
- False
Pregunta 7
Pregunta
Constant voltage power source are preferred for SMAW
Respuesta
- True
- False
Pregunta 8
Pregunta
Large diameter electrodes are preferred for welding the root passes in V grooves and for out-of-position welds
Respuesta
- True
- False
Pregunta 9
Pregunta
Constant voltage power source are generally used for GMAW.
Respuesta
- True
- False
Pregunta 10
Pregunta
In the submerged arc welding process, granular flux is placed on the unleaded seam behind the consumable electrode.
Respuesta
- True
- False
Pregunta 11
Pregunta
Fused fluxes are prone to moisture pick up
Respuesta
- True
- False
Pregunta 12
Pregunta
The source of heat in the resistance welding process is:
Respuesta
-
An electric arc
-
External pressure
-
Resistance of the copper electrode to electron flow
-
Electrical resistance of the workpieces
Pregunta 13
Pregunta
Which of the following arc welding processes is non-consumable electrode type?
Respuesta
-
GTAW
-
SMAW
-
GMAW
-
FCAW
-
SAW
Pregunta 14
Pregunta
Which of the following arc welding processes is non-consumable electrode type?
Respuesta
-
SMAW
-
GMAW
-
FCAW
-
SAW
-
PAW
Pregunta 15
Pregunta
The electron beam welding process results in:
Respuesta
-
wide, deep-penetrating welds and heat-affected zones.
-
narrow, deep-penetrating welds and heat-affected zones.
-
Narrow, shallow-penetrating welds and heat-affected zones.
-
wide, shallow-penetrating welds and heat-affected zones.
Pregunta 16
Pregunta
In thermite welding, the reaction from which the required heat and molten metal is obtained is called:
Respuesta
-
Exothermic
-
Duo thermic
-
Interthermic
-
endothermic
Pregunta 17
Pregunta
In electroslag welding, the usual cooling medium used on the copper shoes is:
Respuesta
-
Dry ice
-
Air
-
Oil
-
Water
Pregunta 18
Pregunta
A welding arc consist of a:
Respuesta
-
Low current and a high voltage
-
High current and a low voltage
-
High current and a high voltage
-
Low current and a low voltage
Pregunta 19
Pregunta
The heat of the welding arc is used to:
Respuesta
-
Locally melt the base material and filler material to create fusion upon solidification
-
Heat the base material and melt the filler material to form a surface bond between the two materials
-
Heat the materials to be jointed before the application of pressure
-
Promote a metallurgical reaction resulting in the bonding of the adjoining materials
Pregunta 20
Pregunta
Welding using the GTAW process with current set to DCEN (Direct Current Electrode Negative) results in:
Respuesta
-
30% arc heat at the electrode and 70% arc heat at the work.
-
70% arc heat at the electrode and 30% arc heat at the work
-
40% arc heat at the electrode and 60% arc heat at the work
-
60% arc heat at the electrode and 40% arc heat tat the work
Pregunta 21
Pregunta
The function of the ingredients in the electrode coating of SMAW electrodes is to:
Respuesta
-
Provide a gas shield, slag covering, scavengers, arc stabilization and additional alloying elements.
-
React with the base metal to assist in the weld fusion
-
Remove rust, mill scale and other contaminants from the surface of the joint.
-
Counteract the effects of arc blow.
Pregunta 22
Pregunta
The temperature for holding low-hydrogen electrodes is:
Respuesta
-
30 Degrees C
-
90 Degrees C
-
120 Degrees C
-
430 Degrees C
Pregunta 23
Pregunta
The GMAW Process uses _______________ To shield the molten weld metal from the atmosphere:
Respuesta
-
A slag system
-
External shielding gas
-
A blanket of flux
-
a vacuum chamber
Pregunta 24
Pregunta
Flux cored arc welding is a welding process usually used in the semi-automatic mode consisting of:
Respuesta
-
A constant current power supply, a continuos wire feeder, a welding gun, and a continuos solid filler metal electrode
-
A constant voltage power supply, a continuos speed wire feeder, a welding gun, and a continuos filler metal electrode with a hollow core containing flux and other ingredients
-
A constant current power supply, a variable speed wire feeder, a welding gun, and a continuos filler metal electrode with a hollow core containing flux and other ingredients
-
A constant voltage power supply, a continuos speed wire feeder, a welding gun, and a continuos filler metal electrode with a hollow core containing primarily metal powder
Pregunta 25
Pregunta
For a flat weld profile and good penetration profile using the metal cored arc welding process (MCAW), a travel angle of:
Respuesta
-
20 Degrees using a drag technique should be used
-
10 Degrees using a drag technique should be used
-
15 Degrees using a push technique should be used
-
30 Degrees using a push technique should be used
Pregunta 26
Pregunta
SAW fluxes:
Respuesta
-
Are classified, each with its own separate designation
-
Are not classified. Only the wire is classified
-
Are classified in conjunction with the welding wire forming a flux-wire designation
-
Are all classified with EM12K wire. Used with other wires would require companies to perform testing to verify desired properties
Pregunta 27
Pregunta
A major advantage of the electron beam welding process is:
Respuesta
-
Low equipment cost and ease of use
-
High speed welding of thin materials
-
Fit-up of joints does not have to be precise
-
Full penetration welds on thick materials in one pass
¿Quieres crear tus propios Tests gratis con GoConqr? Más información.