Test
Applying paper to walls and ceilings level 1
Preguntas del test (20)
1What is the brush shown in the image ?
- Aa. Paperhanging.
- Bb Pasting.
- Cc Fitch.
- Dd Wall.
- Aa. Paperhanging.
2What is a seam roller used for?
- Aa. Hang wallpaper.
- Bb Stretch paper.
- Cc Secure joints.
- Dd Apply paste.
- Aa. Hang wallpaper.
3What should be used to clean paperhanging shears before storage?
- Aa. White spirit.
- Bb Warm water.
- Cc Fungicidal wash.
- Dd Methylated spirit
- Aa. White spirit.
4What is the best storage condition for a chalk line?
- Aa Damp.
- Bb Cold.
- Cc Dry.
- Dd Hot.
- Aa Damp.
5What deterioration can occur if a paperhanging brush is stored while still damp?
- A a Split ends.
- Bb Staining.
- Cc Mildew.
- Dd Corrosion.
- A a Split ends.
6Which adhesive should be used for hanging wood ingrain paper?
- Aa Ready mixed.
- Bb Cellulose.
- Cc Overlap.
- Dd Starch.
- Aa Ready mixed.
7Which of the following adhesives has a long open time but could stain the paper?
- Aa Starch.
- Bb Overlap.
- Cc Cellulose.
- Dd Ready-mixed.
- Aa Starch.
8When wallpapering which one of the following factors can determine the consistency of
adhesives?- Aa Colour of the paper.
- Bb Pattern of the paper.
- Cc Weight of the paper.
- Dd Cost of the paper.
- Aa Colour of the paper.
9Hot paste can cause
- Aa delamination
- Bb air bubbles
- Cc dry edges
- Dd peeling.
- Aa delamination
10Too much water will result in the paste
- Aa going stale quickly
- Bb being too thin
- Cc going lumpy
- Dd being too thick.
- Aa going stale quickly
11Which of the following defects is caused by applying paste that is too thick?
- Aa Overlapping.
- Bb Polishing.
- Cc Creasing.
- Dd Staining.
- Aa Overlapping.
12Which one of the following defects is caused by misses while pasting?
- Aa Blisters.
- Bb Creasing.
- Cc Tearing.
- Dd Staining.
- Aa Blisters.
13What skin condition can be caused by the use of adhesives?
- Aa Abrasions.
- Bb Dermatitis.
- Cc Blisters.
- Dd Cuts.
- Aa Abrasions.
14What is the main factor to be considered when planning to cross-line?
- Aa Position of sockets.
- Bb Starting point.
- Cc Skirting height.
- Dd Time limit.
- Aa Position of sockets.
15Why is it important to calculate the quantity of paper required when planning?
- Aa To minimise waste.
- Bb To ease application.
- Cc To know the tools required.
- Dd To comply with health and safety.
- Aa To minimise waste.
16How much wallpaper is required for a wall 2.5 m in height x 4.5 m in length, if one roll
covers 5m2?- Aa Two rolls.
- Bb Three rolls.
- Cc Five rolls.
- Dd Six rolls.
- Aa Two rolls.
17What is the reason to mark a straight vertical line after turning an internal corner?
- Aa To save paper.
- Bb To keep safe.
- Cc To save time.
- Dd To keep plumb.
- Aa To save paper.
18When applying adhesives how should paste be brushed?
- Aa Right to left.
- Bb Left to right.
- Cc Edge to centre.
- Dd Centre to edge
- Aa Right to left.
19Why is it important to ensure pasted edges are aligned after folding?
- Aa It is easier to hang.
- Bb It prevents damage.
- Cc It prevents drying out.
- Dd It saves time.
- Aa It is easier to hang.
20How can creases be prevented?
- Aa Soaking correctly.
- Bb Pasting correctly.
- Cc Cutting correctly
- Dd Handling correctly.
- Aa Soaking correctly.
Información
- Descripción
- This is a unit test for a level 1 painting and decorating class
- Autor
- james crowley
- Idioma
- English
- Visitas
- 1.068
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test