5871957
Descripción
Test por Jonelle Natividad, actualizado hace más de 1 año
|
Creado por Jonelle Natividad
hace más de 9 años
|
|
Pregunta 1
Pregunta
Considered as the graphic language of the engineers.
Respuesta
-
Power point presentation
-
Technical drawings & Specifications
-
Project Photographs
-
Visual Arts
Pregunta 2
Pregunta
Identify the figure shown below. It is a type of coupling with male thread on one side.
Respuesta
-
Extension Piece
-
Combination Nipple
-
Street Nipple
-
Street Piece
Pregunta 3
Pregunta
Which is the most important among the ff water supply fittings?
Respuesta
-
Elbow
-
Coupling
-
Tee
-
Bushing
Pregunta 4
Pregunta
An ordinary fitting having a back outlet (opposite to the branch). The axes of all the outlets lie in the same plane and are at right angle to each other.
Respuesta
-
Cross Fitting
-
Reared-Outlet Tee
-
Double Tee
-
Double Fitting
Pregunta 5
Pregunta
What is the purpose of a plug?
Respuesta
-
Closing pipe ends with male thread.
-
Closing pipe ends with no thread.
-
Closing pipe ends with female thread.
-
Closing pipe ends with burr.
Pregunta 6
Pregunta
It is a fitting that has a main function of connecting the male end of a pipe to a fitting of a larger size.
Respuesta
-
Bushing
-
Elbow
-
Tee
-
Crossed Fitting
Pregunta 7
Pregunta
It is a type of elbow with a third opening perpendicular to the plain of the run.
Respuesta
-
Side-outlet Elbow
-
Three-outlet Elbow
-
Branched Elbow
-
Special Elbow
Pregunta 8
Respuesta
-
Union Elbow
-
Combined Elbow
-
Nut Elbow
-
Street Elbow
Pregunta 9
Respuesta
-
Union Tee
-
Combined Tee
-
Nut Tee
-
Street Tee
Pregunta 10
Pregunta
Why are special fittings needed to connect iron and copper pipes?
Respuesta
-
To prevent galvanic current from being generated by the two dissimilar metals.
-
To prevent tuberculation in the two dissimilar metals.
-
To prevent corrosion between the two dissimilar metals.
-
To prevent abrasion between the two dissimilar metals.
Pregunta 11
Pregunta
What do you call the process in which the steel and wrought iron pipe rust?
Respuesta
-
Tuberculation
-
Corrosion
-
Oxidation
-
Decomposition
Pregunta 12
Pregunta
The minimum depth of pure lead in a caulked joint.
Respuesta
-
1"
-
1/2"
-
3/4"
-
1 1/2 "
Pregunta 13
Pregunta
Threaded pipe joint cement or mixture shall be used on ___.
Respuesta
-
Female thread only
-
Male thread only
-
Both
-
None
Pregunta 14
Pregunta
What is required for a soft copper water piping?
Respuesta
-
Flared joint
-
Soldered joint
-
Screwed joint
-
Brazed joint
Pregunta 15
Pregunta
How are asbestos cement sewer pipe made?
Respuesta
-
Shall be made with sleeve coupling with same material as the pipe.
-
Shall be made with resilient type material.
-
Shall be made with approved joint cement through proper application.
-
Shall be made using flared joint.
Pregunta 16
Pregunta
At what locations are traps required?
Respuesta
-
At every fixture with integral trap.
-
At every fixture with no integral trap.
-
At every appurtenance.
-
None of the above.
Pregunta 17
Pregunta
What is the relation of the trap and the drain size?
Respuesta
-
Traps shall be one size smaller than the fixture drain.
-
Traps shall be one size larger than the fixture drain.
-
Traps shall be of the same size as the fixture drain.
-
Traps shall be three sizes larger than the fixture drain.
Pregunta 18
Pregunta
Identify the figure shown. It is a type of bushing.
Respuesta
-
Hexagonal Bushing
-
Closed Bushing
-
Faced Bushing
-
Plane Bushing
Pregunta 19
Pregunta
What is a trap seal primer?
Respuesta
-
A device used to clean a trap.
-
A device used to maintain the trap seal.
-
A device used to drain a trap seal.
-
Plane Bushing
¿Quieres crear tus propios Tests gratis con GoConqr? Más información.