¡GoConqr estrena diseño! Cuéntanos qué te parece.

Fichas

CCNA Comprehensive

ss_voyager Inglés 26 fichas

Fichas del conjunto (26)

  1. 1Fast Ethernet and Gigabit Ethernet can be bundled to form an EtherChannel A. True B. FalseB. False
    You cannot mix Fast Ethernet and Gigabit Ethernet
  2. 2PAgP is defined in 802.3ad A True B. FalseB. False
    PAgP is Cisco proprietary
    LACP is defined in 802.3ad
  3. 3All Links must be either layer 2 or layer 3 in a single EtherChannel channel group A. True B. FalseA. True
  4. 4To configure EtherChannel all ports must be identical concerning: same speed and duplex, same protocol i.e. LACP or PAgP, trunk or non-trunk status A. True B. FalseA. True
  5. 5To create an EtherChannel in PAgP sides must be set to Auto - Desirable or Desirable - Desirable A. True B. FalseA. True
  6. 6Interfaces with different native vlan's are prime candidates for forming an EtherChannel A. True B. FalseB. False
    They cannot form an EtherChannel
  7. 7interface range fa0/1 - 4 channel-protocol pagp channel-group 1 mode desirable establishes one side of an EtherChannel A. True B. FalseA. True
    provided speed, duplex, interface type, and vlan mode are matched
  8. 8Best practice is to make a backbone or distribution switch the root switch in spanning tree A. True B. FalseA. True
  9. 9when enabling spanning-tree, use of the keywords primary or secondary, allows for the switches to recalculate timers and priorities to allow them to become the root or secondary root switch A. True B. FalseA. True
  10. 10SSL uses Private Key Cryptography A. True B. FalseB. False
  11. 11Managing the configuration of a router Using ____ Cannot be sniffed A. SSH B. SSL C. Telnet D. Console PortD. Console Port
  12. 12Both Telnet and HTTP transfers data in clear text A. True B. FalseA. True
  13. 13Which protocol allows hosts to exchange messages to indicate problems with packet delivery A. DHCP B. ARP C. TCP D. ICMP E. IPD. ICMP
  14. 14To configure SMTP outbound and POP3 Inbound e-mail which ports should be opened? A. 80 B. 443 C. 143 D. 21 E. 110 F. 23 G. 25 H. 69 I. 53 J. 161 K. 162 L. 22E. 110 POP3
    G. 25 SMTP
  15. 15Match Letter to Number A. Router> B. Router(config-if)# C. Router# D. Router (config-subif)# 1. Interface Mode 2. Subinterface mode 3. user mode 4. Priveleged modeA. - 3. user mode
    B. - 1. Interface mode
    C. - 4. Priveleged mode
    D. - 2. Subinterface mode
    Note: 4 is also known as EXEC-level mode
  16. 16Router (config)#service password-encryption A. turns off password encryption B. moves to console line mode C. applies a weak encryption to passwords D sets the enable passwordC. applies a weak encryption to passwords
  17. 17Router(config-line)#password telnet sets telnet to require a password A. True B. FalseB. False sets the line password to "telnet"
  18. 18To uniquely identify a router or switch the Router(config)#hostname command can be used A. True B. FalseA. True
  19. 19"Configure Terminal" is the key word used to move to global configuration mode from the Router> user mode A. True B. FalseB. False - you must first move to Router# privileged exec mode via the enable command
  20. 20in user mode (Router>)exit logs the user off A. True B. FalseA. True
  21. 21Router#logout is a fictitious command A. True B. FalseB. False - performs the same function as exit
  22. 22Router# save running-config startup-config saves the changes you made to the running configuration to the startup configuration in NVRAM A. True B. FalseB. False the command is
    Router# copy running-config startup-config
  23. 23Router(config-line)# exec-timeout x x sets the console auto logout to x (Minutes) x (seconds) A. True B. FalseA. True
    CAUTION: 0 0 will never logout great for labs but not the real world
  24. 24the "do" command is used to perform an exec mode command while in global configuration mode without exiting A. True B. FalseA. True
  25. 25ChicagoRint> Indicates that the Hostname and description R router and int for internal have been combined into 1 hostname A. True B. FalseA. True
  26. 26to turn off name resolution for command spelling mistakes use the A. Router(config)# no ip domain-lookup B. Router(config)# no ARP commandA. Router(config)# no ip domain-lookup
    command

Información

Descripción
Tis is a comprehensive Subject Review that includes Topics
Creado por
ss_voyager
Visitas
4
Valoración

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?