Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Fichas

chapter 15 spectroscopy

Ashlin Deatherage polymer chem Inglés 55 fichas

Fichas del conjunto (55)

  1. 1NMR provides info on (3)composition, Tacticity(conformation), solution and solid state dynamics
  2. 2ESR(Electron spin resonance) provides info onDegradation, fracture, dynamics of probes.
  3. 3Microwaves provide info onstructure, moments of inertia
  4. 4IR provides info oncomposition, orientation
  5. 5UV-Vizs provides info oncomposition, orientation, quantative determination of additives
  6. 6x-ray provides info onelemental analysis, surface compostion
  7. 7Radiant heat energy, infared is of a frequency which corresponds tomolecular vibrations
  8. 8There are three modes of molecular vibrations:Stretching, in plane bending, and out of plane bending
  9. 9Stretching vibration can either beSymmetrical or asymmetrical
  10. 10types of bending vibrationsTwisting rocking wagging scissoring
  11. 11Intensity correspondsto a change in dipole moment to be detective
  12. 12In order for a vibrational motion to absorb infrared light, it mustresult in a change in the dipole moment of martial
  13. 13And I are spectroscopy only ____ bonds absorb lightpolar
  14. 14planks constant6.626x10^-34 J s
  15. 15velocity of lightc=2.998x10^8 m/s
  16. 16Absorption of ultraviolet and visible (UV-vis) radiation results from electronic transitions of bonding electrons, most commonly fromhighest occupied bonding or non-bonding molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO)
  17. 17The groups which give rise to the absorptions that contain π-bonds are calledchromophores.
  18. 18triadsequence of three monomer units
  19. 19attenuated total reflectance ATRlight penetrates through the surface of a crystal and a signal is generate by the reflectance of the light. Polymers contain additives which hinder the transmission of light
  20. 20Number average degree of polymerizationDPn= (# of repeat unit)/(#number of end group x # of end groups (1 or 2 or branched))
  21. 21conversion %=(integral of polymer signal)/(integral of polymer + monomer signal)
  22. 22relative moles =(integral of proton)/ (number of proton)
  23. 23number average molecular weight(DPn x Molar mass of repeat unit) + molar mass of end group
  24. 24limitations of NMR1. molecular weight
    2. chain end functionality
  25. 25enatiomersnon superimposable mirror images
  26. 26meso isomerinternal symmetry within a molecule, structures and superimposable and more complex
  27. 27Absorption results fromcoupling of a vibration with the oscillating electric field of the IR radiation
  28. 28The basis of IR spectroscopy is that for a particular type of bond deformation ΔE, and hence v,depend upon the atoms involved
  29. 29by measuring the absorption of IR radiation over a range of v a spectrum is obtained which contains a series of absorptions at different v. Each absorption corresponds to a specific type of deformation of a particular bond (or sequence of bonds) and is characteristic of that bond deformation with v not greatly affected by the other atoms present in the molecule.Thus the absorption due to a particular bond deformation occurs at approximately the same v for all molecules (including polymers) which contain that bond.
  30. 30wavenumber is the reciprocal ofwavelength
    v = 1/l
    is related to its frequency by f = vc
  31. 313 regions of Ir spectrum1. the 3500–1300 cm−1 (functional group) region
    2. in the 1300–1000 cm−1 region (finger print region
    3. the 1000–650 cm−1 (olefinic/aromatic) region
  32. 32In the 3500–1300 cm−1 (functional group) region, absorptions can easily be assigned to particular bond deformations on the basis oftheir position, strength and nature (e.g. O−H stretching gives a very strong, broad absorption centred around 3300 cm−1 whereas N−H stretching, which appears in the same wavenumber range, gives a much weaker and sharper absorption that if present in a primary amine group (−NH2) appears as a doublet due to symmetric and asymmetric simultaneous deformation of the two N−H bonds)
  33. 33Absorptions in the 1300–1000 cm−1 region, ‘fingerprint’ regionarise from C−O stretching and more complex skeletal C−C stretching vibrations, often of several bonds together, and are difficult to assign with any certainty; hence, the number, position and strength of the absorptions in this region tend to be unique to a particular material
  34. 34the 1000–650 cm−1 (olefinic/aromatic) region shows absorption patterns that are characteristic of specific types ofsubstituted C=C groups (vinyl, cis- or trans-) or benzene rings (mono-substituted or ortho-, meta- or para-disubstituted) and are due to C−H bending vibrations which are out of the plane defined by the sp2-hybridized carbon atoms.
  35. 35The simplest application of IR spectroscopy is forpolymer identification
  36. 36IR spectroscopy also finds application in the characterization ofbranched polymers and
    copolymers.
  37. 37The degree of branching in a branched polymer can be determined provided thatcharacteristic absorptions due to the branches can be identified
  38. 38Average compositions of copolymers can be determined if the different repeat unitsgive characteristic IR absorptions which are not coincident.
  39. 39IR spectra can provide information ontacticity
  40. 40There are two general types of instrument for recording IR spectra,namely double-beam and Fourier transform (FT) IR spectrometers. most modern IR are FTIR
  41. 41FTIR microscopy is a special type of IR spectroscopy in which samples are imaged byrecording IR absorptions in focused regions of a sample, typically a few microns in size.
  42. 42a set of non superimposable isomers is calledracemic
  43. 43the meso and racemic forms are stereochemical isomers which are not mirror images are calleddiastereomers
  44. 44dyada sequence of two monomer units in a chain
  45. 45'm' dyadis isotactic, when two adjacent chiral centers are in the same conformation
  46. 46'r' dyadis syndiotactic, when two adjacent chiral centers are in different conformations
  47. 47triada sequence of three repeat units
  48. 48atactic polymer (in terms of probabilities)dyad: m=r=.5
    Triad: mm=rr=.25
    mr=.50
  49. 49isotactic polymerdyad and triad: m=mm=1
    all the same conformation
  50. 50syndiotactictriat and dyad: r=rr=1
    alternating conformation
  51. 51when observing tactcity in NMR, if all hydrogens are in the same chemical environmentthe polymer is syndiotactic
  52. 52isotactic and atactic hydrogens in a repeat unit willbe in different chemical enviroments
  53. 53which stack better isotactic or syndiotacticsyndiotactic stack better because their alternating conformation lets them stack without steric hindrance
  54. 54NMR spectra of polymers of low molar mass often show unique absorptions due tothe end groups.
  55. 55Tg increases withsyndiotactic groups

Información

Descripción
polymer chem Fichas sobre chapter 15 spectroscopy, creado por Ashlin Deatherage el 12/11/2022.
Visitas
3
Valoración

Más sobre Spectroscopic Structure Determination

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?