Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Fichas

03Handout01

Eljin Aguilar Robot Dynamics Fundamentalss normal Inglés 29 fichas

Fichas del conjunto (29)

  1. 1is a basic mechanical device for applying a force and doing work. • Robots are made up of ____ that allow them to perform actions.simple machine
  2. 2• Types of simple machines:o Lever
    o Wheel and Axle
    o Pulley
    o Inclined Plane
    o Wedge
    o Screw
  3. 3o Lever Parts o Lever Classes Bar or Beam
     Fulcrum
     Effort
     Load
     Class 1
     Class 2
     Class 3:
  4. 4is made up of a straight rigid object which pivots on a turning point to move or lift an object.o Lever
  5. 5a long plank. It may be wood, metal or any durable material. Bar or Beam
  6. 6a point on the bar creating a pivot Fulcrum
  7. 7applied at one point to move/lift an object Effort
  8. 8object to be moved/lifted Load
  9. 9The fulcrum is between the effort and the load. (Seesaw) Class 1
  10. 10The load is between the effort and the fulcrum. (Wheelbarrow) Class 2
  11. 11The effort is between the load and the fulcrum. (Shovel) Class 3
  12. 12is used to move objects across distances. It uses a wheel with a rod attached in the middle as an axle to help it to lift or move loads.o Wheel and Axle
  13. 13uses a wheel with a groove in it and a rope. It is used to move the load or change direction of the force.o Pulley
  14. 14The axle is fixed in place and cannot be moved. Fixed Pulley
  15. 15o Pulley Types Fixed Pulley
     Movable Pulley:
     Compound Pulley
  16. 16The axle is fixed in place and cannot be moved. Fixed Pulley
  17. 17The load is attached to the pulley and both of them can move from place to place. Movable Pulley
  18. 18a combination of pulleys designed to make the effort less than half of the weight of the load. (Block and Tackle)Compound Pulley
  19. 19is a flat surface with one end higher than the other. It allows heavy objects to slide up to a higher point or down to a lower point.inclined plane
  20. 20consists of two (2) inclined planes, giving it a thin end and thick end to cut, split, or tighten an object. Examples: Knife, axe, nailwedge
  21. 21is an inclined plane around a cylinder. It can be used to lift things or to hold them together.• screw
  22. 22screw partso Shaft
    o Threads
    o Pitch
  23. 23o Shaft – o Threads – o Pitch –o Shaft – cylinder
    o Threads – ridges around the shaft
    o Pitch – distance between the threads
  24. 24indicates how much a machine can increase or decrease the force on a load, compare with the effort force.• Mechanical advantage
  25. 25formula for mechanical advantage𝑀𝐴 =𝐹𝑂𝑈𝑇/F𝐼𝑁
    Where: MA = Mechanical advantage
    FOUT = Force of the object (output force)
    FIN = Effort to overcome the force of the object (input force)
    If MA is > 1, the output force is greater than the input force.
    If MA < 1, it does not have a mechanical advantage and requires more input force.
  26. 26Determine the mechanical advantage if 300N force is required to overcome a load of 700N.Solution:
    FOUT = 700N FIN = 300N
    MA = FOUT/FIN
    = 700N/300N
    = 2.33
  27. 27is the ratio of the work output to work input.• Mechanical efficiency
  28. 28formula for mechanical efficiency𝑀𝐸 = ( 𝑊𝑂𝑈𝑇/𝐼𝑁) 𝑥 100%
    Where: ME = Mechanical efficiency
    WOUT = Work output WIN = Work input
  29. 29A construction worker puts 25J of energy in to one strike of his hammer on the head of a nail. The energy transferred to driving the nail in to the wood is 8J. What is the efficiency of the construction worker's hammering?Solution:
    WOUT = 8J
    WIN = 25J
    ME = 𝑊𝑂𝑈𝑇/WIN 𝑥 100%
    =8j/25𝐽
    = 0.32 𝑥 100%
    = 32%

Información

Descripción
normal Robot Dynamics Fundamentalss Fichas sobre 03Handout01, creado por Eljin Aguilar el 24/02/2025.
Creado por
Eljin Aguilar
Visitas
1
Valoración

Más sobre Simple and Compound Machines

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?