Fichas
BMS303 Questions
Fichas del conjunto (52)
- 1How many subunits does the voltage gated K+ channel have?4 subunits come together to form the channel
(6 transmembrane spanning domains in each subunit --> 24 altogether) - 2Which transmembrane spanning domain is the voltage sensor?The 4th transmembrane domain
(S4) - 3Where is the pore region?The pore region is made from the sequence of amino acids that link the 5th and 6th transmembrane domains
- 4How many transmembrane domains does the Kir channel have?Two
- 5How many gene products have to come together to form the Kir channel?Four
- 6What is the equation for the total current carried by a population of ion channels (I)?I = N.Po.g.(Vm-Ei)
- 7What does Po mean?Open probability
How often the channels are open
If a channel is open more then there will be a higher current - 8What does N stand for?The number of channels.
If you double the number of channels then you double the current
Anything impacting on the trafficking of the channel is going to impact on N - impacting on the current and physiology of the cell - 9What does g stand for?single channel conductance.
The number of ions moving through the channel per unit of time.
Bigger conductance = greater number of ions moving through
Essentially a constant - 10What is TEA?A K+ channel blocker
If used then the Vm moves in a positive direction away from the Nernst for K+ and towards the Nernst for Na+ - 11What is the two electrode voltage clamp technique?1st electrode clamps the membrane potential to a potential that you decide on.
Then the 2nd electrode measures the current at that potential.
Used for larger cells.
Change the potential and measure the current at each and then can plot an IV curve - which can then be used to give info on which channels might be open - 12What is the Vrev?The potential at which the current is 0
(therefore where the line crosses the X axis) - 13What does a Vrev of 0 suggest?Could be a non-selective cation selective ion channel and let everything through.
Or could be a mixture of K+ and Na+ channels - so the Vrev lies inbetween the Nernst for each of them - 14What does a Vrev of -50mV suggest?That the current is due to K+ channels
because the reversal potential is close to the Nernst for K+ - 15What does a Vrev of 50mV suggest?Suggests Na+ current because the Vrev is close to the Nernst for Na+
- 16What is the driving force?V - Vrev = driving force for ion movement
the potential - the reversal potential - 17If the potential is clamped far from the reversal potential what does it mean?The driving force will be bigger and so the currents will be bigger
- 18What is a positive outward current a result of?(top right quadrant)
Cation ion movement OUT
Anion movement IN - 19What is a negative inward current a result of?(bottom left quadrant)
Cation movement IN
Anion movement OUT - 20What is the effect of blockers on current? Why?The current gets closer to 0
The pore is blocked so ions can't move through so the currents are smaller - 21What is the effect of ProTx-II on Nav channel?(Not a linear IV curve because Po is changing with Vm)
Inhibits the Nav channels
The current is shifted towards 0.
Currents becoming more positive due to loss of inward current (less cations in) - 22What is Ohm's law?V = I x R
(voltage = current x resistance) - 23What is G and what is the equation for it?G is the total conductance of a population of ion channels
G = I / V
(current divided by potential) - 24How is point conductance calculated?G = I / (V-Vrev)
current divided by the driving force - 25What are two types of gating?Voltage dependent
Ligand dependent - 26Why is the Boltzmann equation important?In order to be able to say whether the activation process is different between the wildtype and mutant, have to be able to quantify the activation process
- 27What relationship does the Boltzmann equation describe?An S shaped curve/relationship
- 28What is the Vo? Why is it important and what can it be used for?The potential when conductance is 50% of the maximum conductance
Important as it is the point that gives half maximal activation
Can be used to compare the activation of wildtype and mutant. Can do stats test to see if it is significant - 29What process underlie voltage dependent gating?Activation is mediated by the S4 region
Inactivation is mediated by the ball and chain mechanism - 30What experiment was done on the Nav S4 regions?They mutated some of the amino acids and see if it affected the activation of the channels
Charge neutralising mutations - is it the charge that is important?
Charge conserving mutations - still positively charged amino acids - is it the specific amino acid that is important?
Looked at the Vo (potential when 50% of the channels are open) - 31What is the IFMQ3 mutant?Nav channel with the ball and chain mechanism removed so inactivation doesn't occur.
Channels stay activated for longer - easier to measure the currents - 32What was the tail current approach that was used?Clamp the potential to different values
Then clamp the potentials to the same value
Changes driving force instantly
But takes a while for the open probability to change
- i.e. measure Po at the same driving force - 33What where the IMFQ3/mutant results?The Vo for the mutants were all significantly different (lower) than the IMFQ3 mutant (wt without inactivation)
Each of the amino acids are playing a role in voltage sensitivity of the ion channel - 34What are the conclusions about the amino acids in the S4 region for activation?Lots of amino acids are important
Although some are more important that others - the bigger the shift in Vo, the more important the residue is
All of the S4 regions are important in activation
Each of the S4 regions have different amino acids that are important in voltage dependent activation - 35Which region is important for inactivation?The III-IV linker region - the amino acids in Nav (and Cav) channel that link the 3rd and 4th domains
The ball of amino acids moves depending on the membrane potential - moves into the pore and blocks ion movement = inactivation
Researchers believed there would be charged amino acids in the ball that would be important - 36Charged molecule mutationsResearchers mutated charged amino acids to see if there was an impact on inactivation
They thought mutating the charged amino acids would change the inactivation of the Na+ channels - but it didn't - all of the mutants looked the same as the WT
=> charged amino acids not the main drivers for how the ball and chain mechanism works - 37Experiment - took block of 50 amino acids in the linker region and deleted them in blocks of 10blocks 2 and 3 are functional for normal activity (e.g. trafficking) - no functional channels so don't know whether they are needed for inactivation or not
block 5 - functional channel and same inactivation as wildtype --> not needed for inactivation
blocks 1 and 4 - functional channels
Had a massive impact on inactivation --> important for the ball and chain mechanism
(may not be all of them that are necessary - could just be one of the amino acids) - 38Key points of Nav inactivationBall and chain mechanism
III-IV linker region
deletion of 1st and 4th set of 10 amino acids has altered inactivation --> important for the inactivation process
Other studies have shown that it is the hydrophobic amino acids in the III-IV linker regions that are critical for the ball and chain mechanism - 39Inactivation in KvSimilar ball and chain mechanism
but because it is 4 different proteins that come together there isn't linker regions
NH2 terminus instead - 40What are the three causes of rectification?1) Voltage-dependent changes in open probability
2) Goldman rectification
3) Voltage dependent block - 41What is Goldman rectification?It results as a property of the intracellular and extracellular concentrations
e.g. bigger K+ concentrations inside the cell than outside - big outward current and small inward currents -> outward rectification - 42What is voltage dependent block?Symmetrical solutions may show rectification
Ion channel blocked by endogenous ions at particular potentials - 43Kir and Mg2+at higher potentials there should be a current but there isn't any
Mg2+ is going into the pore and blocking it - 44What is selectivity?Measurement of how easily the ions enters the pore
determined from Vrev - 45What is permeability?Measurement of how easy ions move through the pore
Determined from current magnitude - 46What is Vrev?The reversal potential
The potential when the current is 0 (no net current)
Quantitative so can therefore compare mutants to wildtype channels - 47What can the Nernst/Vrev be used to calculate?The relative selectivity of an ion channel to Na+ and K+
A channel is never 100% selective for an ion - 48What is the signature sequence of K+ channels?A motif that is conserved in almost all K+ channels - irrespective of family or voltage dependency
Some genes have been found from this motif alone
This sequence is important for determining selectivity for K+ channels - 49Method for mutating amino acids in the K signature sequenceUsed the shaker family (Kv1.x)
Removed the NH2 terminus to get rid of inactivation
Expressed the channels in oocytes
Mutations made in one of the 8 amino acids of the signature sequence
Selectivity was examined - 50Loss of K+ selectivity mutants - results1, 5, 6 and 8th amino acid mutations had an impact on selectivity
Wildtype K+ channel had selectivity of 0.02 (50K:1Na)
The mutants had relative selectivity of around 1 - 1K:1Na - can't discriminate between K+ and Na+ channel
just changing one amino acid affects selectivity - 51Nav channel selectivityEach pore has different amino acid sequence
D1 and D2 pore region mutations - no change in selectivity
But decreased Na+ current - ions moving less easily through the pore
D3 and D4 mutations - turned into a Cav channel
Also mutated 3 amino acids in D4 - impacted on the Na/K selectivity - shows that other amino acids are important too - 52—
Información
- Descripción
- Fichas sobre BMS303 Questions, creado por rachel-chads el 31/01/2016.
- Creado por
- rachel-chads
- Visitas
- 2
- Valoración
Más sobre Ion channel types and properties