Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Mapa mental

CHAPTER 13 Securing Routing Protocols and the Control Plane

alessandro moreira Cisco 210 - 260 CCNA security Estudo principal Portugués

Mapa mental sobre securing routing protocols and the control plane: CoPP, CPPr e autenticação de OSPF, EIGRP e BGP

Mapa mental: Securing routing protocols and the control plane

Contenido del mapa

CHAPTER 13 Securing Routing Protocols and the Control Plane

  • This chapter begins with a discussion of how to secure the control plane of a router, and specifically through the use of control plane policing (CoPP) and control plane protection (CPPr). The chapter then covers the use of routing update authentication for the following routing protocols: Routing Information Protocol (RIP), Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), and Border Gateway Protocol (BGP).
  1. Securing the Control Plane

    • control plane assegura que manag control e data control fique funcionando
    • used for the creation and operation of the network itself
    • for example, BGP, OSPF, EIGRP, ICMP, RSVP.
    • Minimizing the Impact of Control Plane Traffic on the CPU
      • Process switched traffic falls into two primary categories
        • Receive adjacency traffic
          • show ip cef
      • Data plane traffic requiring special processing by the CPU
        • Although this chapter focuses on control plane traffic, there is still a need to address certain data plane traffic (that is, traffic which has a destination beyond, or through, the network device in question). The following types of data plane traffic require special processing by the CPU resulting in a performance impact on the CPU:
        • (ACL) logging
          • qdo pacote gerado dá match no acl um log é gerado
        • Unicast RPF
          • usando com ACL - process switching of certain packets
        • IP options
        • (TTL) expiry
        • ICMP unreachables
        • Traffi c requiring an ARP request
        • Non-IP traffi c
        • Fragmentation
  2. Control Plane Policing (CoPP)

    • can be used to identify the type and rate of traffic that reaches the control plane of the Cisco IOS device (uso de ACL/logging / sh policy map control-plane)
    • CoPP is a Cisco IOS-wide feature designed to allow users to manage the flow of traffic handled by the route processor of their network devices
    • CoPP is designed to prevent unnecessary traffic from overwhelming the route processor that, if left unabated, could affect system performance.
    • Control Plane Protection(CPPr)
      • faz o mesmo que CoPP + outras caracteristicas
        • Host subinterface
        • Transit subinterface
        • similar to control plane policing, that can help to mitigate the effects on the CPU of traffic that requires processing by the CPU.
        • Port-filtering feature
          • Enables the policing and dropping of packets that are sent to closed or nonlistening TCP or UDP ports
        • CEF-Exception subinterface
        • Queue-thresholding feature
          • Limits the number of packets for a specified protocol that are allowed in the control-plane IP input queue
  3. Securing Routing Protocols

    • Implement Routing Update Authentication on OSPF
      • Uso de MD5
      • Use the ip ospf authentication-key interface command to specify this password.
      • If you enable MD5 authentication with the message-digest keyword, you must configure a password with the ip ospf message-digest-key interface command.
      • OSPF MD5 Authentication Configuration
        • ! interface GigabitEthernet0/1 ip address 192.168.10.1 255.255.255.0 ip ospf authentication message-digest ip ospf message-digest-key 1 md5 CCNA ! router ospf 65000 router-id 192.168.10.1 area 0 authentication message-digest network 10.1.1.0 0.0.0.255 area 10 network 192.168.10.0 0.0.0.255 area 0
    • Implement Routing Update Authentication on EIGRP
      • Alem do MD5 o router destino tem que saber o key chay
        • key chain CCNA key 1 key-string CCNA-SECURITY
        • interface GigabitEthernet0/1 ip address 192.168.10.1 255.255.255.0 ip authentication mode eigrp 65000 md5 ip authentication key-chain eigrp 65000 CCNA
        • router eigrp 65000 network 192.168.10.0 network 192.168.100.0
        • The same configuration (with the exception of the interface IP address) needs to be identical on the other EIGRP peer.
    • Implement Routing Update Authentication on RIP
      • RIPV2 suporta 2 tipos de auten
        • plaintext authentication
          • default
        • MD5 authentication
      • RIP Version 1 (RIPv1) does not support authentication
      • RIPv2 MD5 Authentication Configuration
        • key chain CCNA key 1 key-string CCNA-SECURITY
        • interface GigabitEthernet0/1 ip address 192.168.10.1 255.255.255.0 ip rip authentication mode md5 ip rip authentication key-chain CCNA
        • router rip version 2 network 192.168.10.0 network 192.168.100.0
        • The same configuration (with the exception of the interface IP address and network statements) needs to be identical on the other RIP peer.
    • Implement Routing Update Authentication on BGP
      • BGP MD5 Authentication Configuration
        • router bgp 65000 bgp log-neighbor-changes network 192.168.15.0 neighbor 192.168.10.2 remote-as 65100 neighbor 192.168.10.2 password CCNA-SECURITY
        • A similar configuration must be in place on the other BGP peer.
        • show ip bgp neighbors | include Option Flags

Información

Descripción
Cisco 210 - 260 CCNA security Estudo principal Mapa Mental sobre CHAPTER 13 Securing Routing Protocols and the Control Plane, creado por alessandro moreira el 19/10/2016.
Visitas
2
Valoración

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?