Test
Part 2 - SU 7.2
Crea una cuenta gratis para terminar este test
Guarda tu progreso y consulta tu resultado final.
¿Ya tienes cuenta? Inicia sesión
Preguntas del test (30)
1An internal auditor uses a number of techniques to select samples. A frequently, and appropriately, used technique is random selection. In which of the following situations would random selection be least justified? The auditor needs to
- AA.Test sales transactions to determine that they were properly authorized and are supported by shipping documents.
- BB.Confirm accounts receivable and has already selected the 10 largest accounts for confirmation. The remaining accounts are not numbered. The auditor only has a computer listing of the accounts in alphabetical order approximately 250 pages long with 50 account balances on every page.
- CC.Obtain evidence on the proper sales cut-off by sampling items from the monthly sales journal to determine if the items were recorded in the correct time period.
- DD.Test the perpetual inventory records to ensure that the sample covers the largest monetary value items in the account.
2An auditor is conducting a survey of perceptions and beliefs of employees concerning an organization health care plan. The best approach to selecting a sample is to
- AA.Focus on people who are likely to respond so that a larger sample can be obtained.
- BB.Focus on managers and supervisors because they can also reflect the opinions of the people in their departments.
- CC.Use stratified sampling where the strata are defined by marital and family status, age, and salaried/hourly status.
- DD.Use monetary-unit sampling according to employee salaries.
3A bank’s internal auditor wishes to determine whether all loans are supported by sufficient collateral, properly aged regarding current payments, and accurately categorized as current or noncurrent. The best audit procedure to accomplish these objectives would be to
- AA.Use generalized audit software to read the total loan file, age the file by last payment due, and extract a statistical sample stratified by the current and aged population. Examine each loan selected for proper collateralization and aging.
- BB.Select a block sample of all loans in excess of a specified monetary limit and determine if they are current and properly categorized. For each loan approved, verify aging and categorization.
- CC.Select a discovery sample of all loan applications to determine whether each application contains a statement of collateral.
- DD.Select a sample of payments made on the loan portfolio and trace them to loans to see if the payments are properly applied. For each loan identified, examine the loan application to determine that the loan has proper collateralization.
4The supervisor of claims processing for a health insurance firm selects all claims processed in the past 2 days by a particular employee for audit. From this sample, the supervisor can develop
- AA.An overall representative view of employee work for the year.
- BB.A quantification of sampling error.
- CC.Conclusions about the correctness of processing for the department.
- DD.An understanding of the details contained in the processing task.
5If all other sample size planning factors were exactly the same in attribute sampling, changing the confidence level from 95% to 90% and changing the desired precision from 2% to 5% would result in a revised sample size that would be
- AA.Larger.
- BB.Smaller.
- CC.Unchanged.
- DD.Indeterminate.
6When planning an attribute sampling application, the difference between the expected error rate and the maximum tolerable error rate is the planned
- AA.Precision.
- BB.Reliability.
- CC.Dispersion.
- DD.Skewness.
7In evaluating an attribute sample, the range within which the estimate of the population characteristic is expected to fall is called
- AA.Confidence level.
- BB.Precision.
- CC.Upper error limit.
- DD.Expected error rate.
8In selecting a sample of items for attributes testing, an auditor must consider the confidence level factor, the desired precision, and the
- AA.Recorded monetary amount of the population.
- BB.Sampling interval.
- CC.Expected occurrence rate.
- DD.Standard deviation in the population.
9An internal auditor is planning to use attribute sampling to test the effectiveness of a specific internal control related to approvals for cash disbursements. In attribute sampling, decreasing the estimated occurrence rate from 5% to 4% while keeping all other sample size planning factors exactly the same would result in a revised sample size that would be
- AA.Larger.
- BB.Smaller.
- CC.Unchanged.
- DD.Indeterminate.
10The size of a given sample is jointly a result of characteristics of the population of interest and decisions made by the internal auditor. Everything else being equal, sample size will
- AA.Increase if the internal auditor decides to accept more risk of incorrectly concluding that controls are effective when they are in fact ineffective.
- BB.Double if the internal auditor finds that the variance of the population is twice as large as was indicated in the pilot sample.
- CC.Decrease if the internal auditor increases the tolerable rate of deviation.
- DD.Increase as sampling risk increases.
11If all other factors specified in an attribute sampling plan remain constant, decreasing the confidence level from 95% to 90% would cause the required sample size to
- AA.Increase.
- BB.Decrease.
- CC.Change by 5%.
- DD.Remain the same.
12In an attribute sampling application, holding other factors constant, sample size will increase as which of the following becomes smaller?
- AA.Confidence coefficient.
- BB.Population.
- CC.Planned precision.
- DD.Expected rate of occurrence.
13An auditor has to make a number of decisions when using attribute sampling. The term efficiency is used to describe anything that affects sample size. The term effectiveness is used to describe the likelihood that the statistical sample result will be a more accurate estimate of the true population error rate. Assume an auditor expects a control procedure failure rate of 0.5%. The auditor is making a decision on whether to use a 90% or a 95% confidence level and whether to set the tolerable control failure rate at 3% or 4%. Which of the following statements regarding efficiency and effectiveness of an attribute sample is true?
- AA.Decreasing the confidence level to 90% and decreasing the tolerable control failure rate to 3% will result in both increased efficiency and effectiveness.
- BB.Decreasing the tolerable failure rate from 4% to 3% will increase audit efficiency.
- CC.Increasing the confidence level to 95% and decreasing the tolerable control failure rate to 3% will increase audit effectiveness.
- DD.Increasing the confidence level to 95% will increase audit efficiency.
14Which of the following must be known to evaluate the results of an attribute sample?
- AA.Estimated dollar value of the population.
- BB.Standard deviation of the sample values.
- CC.Actual size of the sample selected.
- DD.Finite population correction factor.
15Fact Pattern: An individual is an internal auditor for a car rental agency that operates a fleet of 75,000 vehicles in 1,000 cities throughout North America. As a part of an operational audit, the auditor tested the impact of vehicle age on the incidence of major repairs. A computer program showed that 20% of the fleet has been in service for more than 12 months. A sample of 375 is drawn based on
Confidence level = 95%
Expected rate of occurrence = 10%
Precision = ±3%
The records related to repairs completed after 12 months of service for the selected vehicles were reviewed to determine if major repairs were needed.
Q:Assuming that all other factors remain constant, how would sample size and achieved precision be affected by a change in confidence level from 95% to 90%?- AA.Sample size would be smaller; achieved precision would be larger.
- BB.Both sample size and achieved precision would be larger.
- CC.Both sample size and achieved precision would be smaller.
- DD.Sample size would be larger; achieved precision would be smaller.
16An auditor applying a discovery-sampling plan with a 5% risk of overreliance may conclude that there is
- AA.A 95% probability that the actual rate of occurrence in the population is less than the critical rate if only one exception is found.
- BB.A 95% probability that the actual rate of occurrence in the population is less than the critical rate if no exceptions are found.
- CC.A 95% probability that the actual rate of occurrence in the population is less than the critical rate if the occurrence rate in the sample is less than the critical rate.
- DD.Greater than a 95% probability that the actual rate of occurrence in the population is less than the critical rate if no exceptions are found.
17How does stop-or-go attribute sampling differ from fixed-sample-size attribute sampling?
- AA.Nonsampling error is smaller.
- BB.Total expected sample size will always be smaller.
- CC.Desired reliability does not have to be specified in advance.
- DD.It cannot be used to determine the assessed level of control risk.
18Which form of sampling is most likely to be used in a fraud investigation?
- AA.Stop-or-go sampling.
- BB.Discovery sampling.
- CC.Acceptance sampling for attributes.
- DD.Probability-proportional-to-size (PPS) sampling.
19The appropriate sampling plan to use to identify at least one irregularity, assuming some number of such irregularities exist in a population, and then to discontinue sampling when one irregularity is observed is
- AA.Stop-or-go sampling.
- BB.Discovery sampling.
- CC.Variables sampling.
- DD.Attribute sampling.
20Which sampling plan requires no additional sampling once the first error is found?
- AA.Stratified sampling.
- BB.Attribute sampling.
- CC.Stop-or-go sampling.
- DD.Discovery sampling.
21When an internal auditor’s sampling objective is to obtain a measurable assurance that a sample will contain at least one occurrence of a specific critical exception existing in a population, the sampling approach to use is
- AA.Random.
- BB.Discovery.
- CC.Probability-proportional-to-size.
- DD.Variables.
22Assume the internal auditor becomes concerned that significant fraud may be taking place by dentists who are billing the health care processor for services that were not provided. For example, employees may have their teeth cleaned, but the dentist charges the processor for pulling teeth and developing dentures. The most effective procedure to determine whether such a fraud exists is to
- AA.Develop a schedule of payments made to individual dentists. Verify that payments were made to the dentists by confirming the payments with the health care processor.
- BB.Take a random sample of payments made to dentists and confirm the amounts paid with the dentists’ offices to determine that the amounts agree with the amounts billed by the dentists.
- CC.Take a random sample of claims submitted by dentists and trace through the system to determine whether the claims were paid at the amounts billed.
- DD.Take a discovery sample of employee claims that were submitted through dentist offices, and confirm the type of service performed by the dentist through direct correspondence with the employee who had the service performed.
23After partially completing an internal control review of the accounts payable department, an auditor suspects that some type of fraud has occurred. To ascertain whether the fraud is present, the best sampling approach is to use
- AA.Simple random sampling to select a sample of vouchers processed by the department during the past year.
- BB.Probability-proportional-to-size sampling to select a sample of vouchers processed by the department during the past year.
- CC.Discovery sampling to select a sample of vouchers processed by the department during the past year.
- DD.Judgmental sampling to select a sample of vouchers processed by clerks identified by the department manager as acting suspiciously.
24Management is legally required to prepare a shipping document for all movement of hazardous materials. The document must be filed with bills of lading. Management expects 100% compliance with the procedure. Which of the following sampling approaches is most appropriate?
- AA.Attribute sampling.
- BB.Discovery sampling.
- CC.Targeted sampling.
- DD.Variables sampling.
25A random attribute sample taken from a large population should be representative. However, a random sample may not detect fraud. For this reason, the size of a random sample is most dependent on which of the following factors?
- AA.The size of the population.
- BB.The level of risk that the organization has accepted.
- CC.The comprehensive basis of accounting used to prepare the organization’s financial statements.
- DD.The size of the internal audit function.
26A sample size of 50 purchase orders was selected for testing by the auditor. The results were above the desired deviation rate of 2%. The audit manager increased the sample size to 75 purchase orders. This is an example of
- AA.Stratified mean-per-unit sampling.
- BB.Discovery sampling.
- CC.Block sampling.
- DD.Stop-or-go sampling.
27In a variables sampling application, which of the following will result when confidence level is changed from 90% to 95%?
- AA.Standard error of the mean will not be affected.
- BB.Nonsampling error will decrease.
- CC.Sample size will increase.
- DD.Point estimate of the arithmetic mean will increase.
28In selecting a sample of items for variables testing, an auditor must consider the desired precision, the standard deviation, and the
- AA.Recorded monetary amount of the population.
- BB.Acceptable risk level.
- CC.Expected occurrence rate.
- DD.Sampling interval.
29If all other factors in a sampling plan are held constant, changing the measure of tolerable misstatement to a smaller value will cause the sample size to be
- AA.Smaller.
- BB.Larger.
- CC.Unchanged.
- DD.Indeterminate.
30Fact Pattern: Using mean-per-unit sampling to estimate the value of inventory, an internal auditor had the following results:
Projected inventory value US $3,000,000
Confidence level 95%
Confidence interval $2,800,000 to $3,200,000
Standard error $100,000
Z-value (approximate) 2.0
Precision $200,000
The recorded value of inventory was US $3,075,000.
Q:Which of the following changes will result in a narrower confidence interval?- AA.An increase in the confidence level from 95% to 99%.
- BB.A decrease in the confidence level from 95% to 90%.
- CC.A decrease in the allowable risk of incorrect rejection.
- DD.An increase in the precision.
Información
- Descripción
- CIA Part 2 - SU 7 Test sobre Part 2 - SU 7.2, creado por Sonjoy Dahal el 11/06/2020.
- Autor
- Sonjoy Dahal
- Idioma
- English
- Visitas
- 0
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test